Export limit exceeded: 417955 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (417955 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-119710 | 2 Pipeshub, Pipeshub-ai | 2 Pipeshub, Pipeshub-ai | 2026-10-30 | 7.1 High |
| PipesHub 0.3.0 before 0.10.0 contains an event type injection vulnerability that allows authenticated users with only the crawl:write scope to delete connectors by injecting into the :connector path segment. Attackers can send a :connector value like web.delete to the schedule route, bypassing connector:delete and lock checks to remove connector instances and purge record embeddings. | ||||
| CVE-2026-63915 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: nfc: hci: fix out-of-bounds read in HCP header parsing Both nfc_hci_recv_from_llc() and nci_hci_data_received_cb() read packet->header from skb->data at function entry without first checking that the buffer holds at least one byte. A malicious NFC peer can send a 0-byte HCP frame that passes through the SHDLC layer and reaches these functions, causing an out-of-bounds heap read of packet->header. The same 0-byte frame, if queued as a non-final fragment, also causes the reassembly loop to underflow msg_len to UINT_MAX, triggering skb_over_panic() when the reassembled skb is written. Fix this by adding a pskb_may_pull() check at the entry of each function before packet->header is first accessed. The existing pskb_may_pull() checks before the reassembled hcp_skb is cast to struct hcp_packet remain in place to guard the 2-byte HCP message header. | ||||
| CVE-2026-63916 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: Fix OOB write in wacom_hid_set_device_mode() wacom_hid_set_device_mode() currently assumes that the HID_DG_INPUTMODE usage is always located in the first field (field[0]) of the feature report. However, a device can specify HID_DG_INPUTMODE in a different field. If HID_DG_INPUTMODE is in a field other than the first one and the first field has a report_count smaller than the usage_index of HID_DG_INPUTMODE, this leads to an out-of-bounds write to r->field[0]->value. Fix this by storing the field index of HID_DG_INPUTMODE in 'struct hid_data' during feature mapping. In wacom_hid_set_device_mode(), use this stored field index to access the correct field and add bounds checks to ensure both the field index and the value index are within valid ranges before writing. | ||||
| CVE-2026-105924 | 1 Qt | 2 Qt, Qtbase | 2026-10-30 | 5.5 Medium |
| A NULL pointer dereference vulnerability in the Qt QCborValue to JSON conversion of the Qt Core module. | ||||
| CVE-2026-119317 | 1 Tenable | 1 Plugin Feed | 2026-10-30 | 6.5 Medium |
| On Linux, an authenticated, low-privileged Nessus user with scan-creation rights could read arbitrary text files on the scanner host with the privileges of the nessusd process by running a custom Unix compliance audit against the scanner itself. | ||||
| CVE-2026-111487 | 1 Qt | 2 Qt, Qt3d | 2026-10-30 | 7.8 High |
| An out-of-bounds write vulnerability in the Qt Framework assimp scene import plugin of the Qt3D module. | ||||
| CVE-2026-63917 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6: vti: Use ip6_tnl.net in vti6_changelink(). ip netns add ns1 ip netns add ns2 ip -n ns1 link add vti6_test type vti6 remote ::1 local ::2 key 7 ip -n ns1 link set vti6_test netns ns2 ip -n ns2 link set vti6_test type vti6 remote ::3 local ::4 key 9 ip netns del ns2 ip netns del ns1 [ 132.495484] ------------[ cut here ]------------ [ 132.497609] kernel BUG at net/core/dev.c:12376! Commit 61220ab34948 ("vti6: Enable namespace changing") dropped NETIF_F_NETNS_LOCAL from vti6 devices. A vti6 tunnel can then move through IFLA_NET_NS_FD. After the move dev_net(dev) points at the new netns while t->net stays at the creation netns. vti6_changelink() and vti6_update() still use dev_net(dev) and dev_net(t->dev). They unlink from one per netns hash and relink into another. The creation netns is left with a stale entry. cleanup_net() of that netns later walks freed memory. Reachable from an unprivileged user namespace (unshare --user --map-root-user --net). Cross tenant scope on container hosts. | ||||
| CVE-2026-63963 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: validate VDO count in Discover Identity ACK handlers Properly validate the count passed from a device when calling svdm_consume_identity() or svdm_consume_identity_sop_prime() as the device-controlled value could index off of the static arrays, which could leak data. | ||||
| CVE-2026-119086 | 1 Freertos | 1 Freertos-kernel | 2026-10-30 | 6.5 Medium |
| Missing queue-set type validation in the queue-set selection system call in FreeRTOS-Kernel before V11.3.3 on MPU-enabled ports with queue sets enabled allows a local unprivileged task to write actor-controlled data beyond a pointer-sized object on the privileged kernel stack, affecting privileged memory across the MPU isolation boundary. To remediate this issue, users should upgrade to FreeRTOS-Kernel V11.3.3, rebuild, and reflash affected firmware. Builds that do not enable queue sets are not affected. | ||||
| CVE-2026-63962 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: tcpm: bound altmode_desc[] per iteration in svdm_consume_modes() svdm_consume_modes() checks pmdata->altmodes against the array size once before the loop over the count, but forgot to check the bound at every point in the loop. In the well-behaved SVDM discovery flow this is harmless because each of at most SVID_DISCOVERY_MAX SVIDs contributes at most MODE_DISCOVERY_MAX modes, exactly filling altmode_desc[ALTMODE_DISCOVERY_MAX]. But the CMDT_RSP_ACK handler in tcpm_pd_svdm() does not correlate an incoming ACK with any request the port actually sent. Once port->partner is set, an unsolicited Discover Modes ACK is consumed unconditionally. A broken or malicious port partner can therefore drive altmodes to ALTMODE_DISCOVERY_MAX - 1 via the normal flow, and then send one extra Discover Modes ACK with seven VDOs. Because the pre-loop check passes, the loop could then writes up to five entries past altmode_desc[]. For mode_data_prime the next field in struct tcpm_port is the partner_altmode[] pointer array, which then receives partner-chosen SVID/VDO bytes. Move the bound check inside the loop so the array can never be indexed past ALTMODE_DISCOVERY_MAX regardless of how many VDOs the partner supplies or how the function was reached. | ||||
| CVE-2025-8444 | 2 Wealcoder, Wordpress | 2 Animation Addons For Elementor – Gsap Motion Elementor Addons & Website Templates, Wordpress | 2026-10-30 | 6.4 Medium |
| The Animation Addons for Elementor – GSAP Powered Elementor Addons & Website Templates plugin for WordPress is vulnerable to DOM-Based Stored Cross-Site Scripting via the multiple parameters in all versions up to, and including, 4.2.6 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-76026 | 1 Google | 1 Chrome | 2026-10-30 | 8.8 High |
| Memory corruption in Autofill in Google Chrome prior to 156.0.8078.79 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-119300 | 1 Wekan | 1 Wekan | 2026-10-30 | 6.5 Medium |
| Wekan is open source kanban built with Meteor. Prior to 11.11, the user-search publication in server/publications/users.js and the searchUsers method in server/models/users.js pass authenticated user-controlled searchTerm and query values to new RegExp() without escaping regular-expression metacharacters. MongoDB-backed deployments evaluate the resulting patterns with PCRE2, allowing a logged-in user to submit catastrophic-backtracking expressions that consume database CPU and degrade or deny service to other users; searchUsers additionally requires board membership or site-admin status. The FerretDB v1 / RE2 unaffected configuration is not practically affected by catastrophic backtracking. This issue is fixed in version 11.11. | ||||
| CVE-2026-112348 | 2 Themeum, Wordpress-extensions | 2 Kirki, Kirki | 2026-10-30 | 6.5 Medium |
| Kirki plugin for WordPress before 6.2.5 contains a reCAPTCHA bypass vulnerability that allows unauthenticated attackers to submit frontend forms without valid verification by omitting the g-recaptcha-token field from POST requests to the form submission endpoint. Attackers can exploit the verify() method's early return on empty token values to submit unlimited forms, triggering notification emails, webhooks, and unbounded writes to the submissions table without completing reCAPTCHA validation. | ||||
| CVE-2026-119654 | 1 Devlive-community | 1 Datacap | 2026-10-30 | 8.8 High |
| DataCap through 2025.1.1 contains a missing authorization vulnerability that allows any authenticated user to escalate privileges by calling administrative role and menu management APIs. Attackers, including self-registered accounts, can send PUT requests to /api/v1/user/allocationRole to assign themselves the administrator role and gain full control of the instance. | ||||
| CVE-2026-63964 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: typec: ucsi: ccg: reject firmware images without a ':' record header do_flash() locates the first .cyacd record with p = strnchr(fw->data, fw->size, ':'); while (p < eof) { s = strnchr(p + 1, eof - p - 1, ':'); ... } If the firmware image contains no ':' byte, strnchr() returns NULL. NULL compares less than the valid kernel pointer eof, so the loop body runs and strnchr() is called with p + 1 == (void *)1 and a length of roughly (unsigned long)eof, causing a wonderful crash. The not_signed_fw fallthrough earlier in do_flash() and the chip-state branches in ccg_fw_update_needed() allow an unsigned blob to reach this loop, so a root user who can place a crafted file under /lib/firmware and write the do_flash sysfs attribute can trigger the oops. Bail out with -EINVAL when the initial strnchr() returns NULL. | ||||
| CVE-2026-119978 | 1 Flowiseai | 1 Flowise | 2026-10-30 | 8.5 High |
| Flowise through 3.1.4 contains a sandbox escape vulnerability that allows authenticated users to execute OS commands by abusing allowlisted langchain and mammoth modules when ALLOW_BUILTIN_DEP=true. Attackers can submit JavaScript to /api/v1/node-custom-function that writes a file into the mammoth package via LocalFileStore and requires it, escaping vm2 as the Flowise process user. | ||||
| CVE-2026-63965 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: pressure: bmp280: fix stack leak in bmp580 trigger handler bmp580_trigger_handler() declares its scan buffer on the stack without an initializer and then memcpy()s 3 bytes of 24-bit sensor data into each 4-byte __le32 field. The high byte of comp_temp and comp_press is left uninitialized, and the channel storagebits is 32, so two bytes of stack are pushed to userspace per scan. This is a regression from when the buffer lived in the private data, the move to a stack-local struct dropped the implicit zeroing. bme280_trigger_handler() was fixed up to handle this bug, but this driver was not fixed because there was no padding hole, but rather a short-fill issue. Fix this all by just zero-initializing the structure on the stack. | ||||
| CVE-2026-78002 | 2 Redhat, Rsyslog | 9 Enterprise Linux, Enterprise Linux Eus, Rhel Aus and 6 more | 2026-10-30 | 7.5 High |
| A flaw was found in rsyslog. An unauthenticated remote attacker can trigger a heap buffer overflow in the RainerScript `replace()` function by sending specially crafted syslog messages. This vulnerability arises from an incorrect buffer size calculation during string replacement, causing memory corruption. Successful exploitation can lead to a denial of service (DoS) for the affected system. | ||||
| CVE-2026-19654 | 2 Redhat, Rsyslog | 9 Enterprise Linux, Enterprise Linux Eus, Rhel Aus and 6 more | 2026-10-30 | 7.5 High |
| A unauthenticated remote peer may lead rsyslogd to crash due to a flaw in the optional imptcp module. A crafted input sequence during oversize-frame recovery can cause an invalid internal message length and terminate rsyslogd. No confidentiality or integrity impact, privilege escalation, or code execution has been identified. imtcp and the default imptcp framing modes are not affected. | ||||