Export limit exceeded: 26253 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26253 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-68754 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rtc: amlogic-a4: fix double free caused by devm The clock obtained via devm_clk_get_enabled() is automatically managed by devres and will be disabled and freed on driver detach. Manually calling clk_disable_unprepare() in error path and remove function causes double free. Remove the redundant clk_disable_unprepare() calls from the probe error path and aml_rtc_remove(), allowing the devm framework to automatically manage the clock lifecycle. | ||||
| CVE-2025-68766 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc() If irq_domain_translate_twocell() sets "hwirq" to >= MCHP_EIC_NIRQ (2) then it results in an out of bounds access. The code checks for invalid values, but doesn't set the error code. Return -EINVAL in that case, instead of returning success. | ||||
| CVE-2025-68760 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iommu/amd: Fix potential out-of-bounds read in iommu_mmio_show In iommu_mmio_write(), it validates the user-provided offset with the check: `iommu->dbg_mmio_offset > iommu->mmio_phys_end - 4`. This assumes a 4-byte access. However, the corresponding show handler, iommu_mmio_show(), uses readq() to perform an 8-byte (64-bit) read. If a user provides an offset equal to `mmio_phys_end - 4`, the check passes, and will lead to a 4-byte out-of-bounds read. Fix this by adjusting the boundary check to use sizeof(u64), which corresponds to the size of the readq() operation. | ||||
| CVE-2025-68762 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: netpoll: initialize work queue before error checks Prevent a kernel warning when netconsole setup fails on devices with IFF_DISABLE_NETPOLL flag. The warning (at kernel/workqueue.c:4242 in __flush_work) occurs because the cleanup path tries to cancel an uninitialized work queue. When __netpoll_setup() encounters a device with IFF_DISABLE_NETPOLL, it fails early and calls skb_pool_flush() for cleanup. This function calls cancel_work_sync(&np->refill_wq), but refill_wq hasn't been initialized yet, triggering the warning. Move INIT_WORK() to the beginning of __netpoll_setup(), ensuring the work queue is properly initialized before any potential failure points. This allows the cleanup path to safely cancel the work queue regardless of where the setup fails. | ||||
| CVE-2025-68763 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: crypto: starfive - Correctly handle return of sg_nents_for_len The return value of sg_nents_for_len was assigned to an unsigned long in starfive_hash_digest, causing negative error codes to be converted to large positive integers. Add error checking for sg_nents_for_len and return immediately on failure to prevent potential buffer overflows. | ||||
| CVE-2025-68765 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mt76: mt7615: Fix memory leak in mt7615_mcu_wtbl_sta_add() In mt7615_mcu_wtbl_sta_add(), an skb sskb is allocated. If the subsequent call to mt76_connac_mcu_alloc_wtbl_req() fails, the function returns an error without freeing sskb, leading to a memory leak. Fix this by calling dev_kfree_skb() on sskb in the error handling path to ensure it is properly released. | ||||
| CVE-2025-68771 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: fix kernel BUG in ocfs2_find_victim_chain syzbot reported a kernel BUG in ocfs2_find_victim_chain() because the `cl_next_free_rec` field of the allocation chain list (next free slot in the chain list) is 0, triggring the BUG_ON(!cl->cl_next_free_rec) condition in ocfs2_find_victim_chain() and panicking the kernel. To fix this, an if condition is introduced in ocfs2_claim_suballoc_bits(), just before calling ocfs2_find_victim_chain(), the code block in it being executed when either of the following conditions is true: 1. `cl_next_free_rec` is equal to 0, indicating that there are no free chains in the allocation chain list 2. `cl_next_free_rec` is greater than `cl_count` (the total number of chains in the allocation chain list) Either of them being true is indicative of the fact that there are no chains left for usage. This is addressed using ocfs2_error(), which prints the error log for debugging purposes, rather than panicking the kernel. | ||||
| CVE-2025-68772 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid updating compression context during writeback Bai, Shuangpeng <sjb7183@psu.edu> reported a bug as below: Oops: divide error: 0000 [#1] SMP KASAN PTI CPU: 0 UID: 0 PID: 11441 Comm: syz.0.46 Not tainted 6.17.0 #1 PREEMPT(full) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:f2fs_all_cluster_page_ready+0x106/0x550 fs/f2fs/compress.c:857 Call Trace: <TASK> f2fs_write_cache_pages fs/f2fs/data.c:3078 [inline] __f2fs_write_data_pages fs/f2fs/data.c:3290 [inline] f2fs_write_data_pages+0x1c19/0x3600 fs/f2fs/data.c:3317 do_writepages+0x38e/0x640 mm/page-writeback.c:2634 filemap_fdatawrite_wbc mm/filemap.c:386 [inline] __filemap_fdatawrite_range mm/filemap.c:419 [inline] file_write_and_wait_range+0x2ba/0x3e0 mm/filemap.c:794 f2fs_do_sync_file+0x6e6/0x1b00 fs/f2fs/file.c:294 generic_write_sync include/linux/fs.h:3043 [inline] f2fs_file_write_iter+0x76e/0x2700 fs/f2fs/file.c:5259 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x7e9/0xe00 fs/read_write.c:686 ksys_write+0x19d/0x2d0 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf7/0x470 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The bug was triggered w/ below race condition: fsync setattr ioctl - f2fs_do_sync_file - file_write_and_wait_range - f2fs_write_cache_pages : inode is non-compressed : cc.cluster_size = F2FS_I(inode)->i_cluster_size = 0 - tag_pages_for_writeback - f2fs_setattr - truncate_setsize - f2fs_truncate - f2fs_fileattr_set - f2fs_setflags_common - set_compress_context : F2FS_I(inode)->i_cluster_size = 4 : set_inode_flag(inode, FI_COMPRESSED_FILE) - f2fs_compressed_file : return true - f2fs_all_cluster_page_ready : "pgidx % cc->cluster_size" trigger dividing 0 issue Let's change as below to fix this issue: - introduce a new atomic type variable .writeback in structure f2fs_inode_info to track the number of threads which calling f2fs_write_cache_pages(). - use .i_sem lock to protect .writeback update. - check .writeback before update compression context in f2fs_setflags_common() to avoid race w/ ->writepages. | ||||
| CVE-2025-68780 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/deadline: only set free_cpus for online runqueues Commit 16b269436b72 ("sched/deadline: Modify cpudl::free_cpus to reflect rd->online") introduced the cpudl_set/clear_freecpu functions to allow the cpu_dl::free_cpus mask to be manipulated by the deadline scheduler class rq_on/offline callbacks so the mask would also reflect this state. Commit 9659e1eeee28 ("sched/deadline: Remove cpu_active_mask from cpudl_find()") removed the check of the cpu_active_mask to save some processing on the premise that the cpudl::free_cpus mask already reflected the runqueue online state. Unfortunately, there are cases where it is possible for the cpudl_clear function to set the free_cpus bit for a CPU when the deadline runqueue is offline. When this occurs while a CPU is connected to the default root domain the flag may retain the bad state after the CPU has been unplugged. Later, a different CPU that is transitioning through the default root domain may push a deadline task to the powered down CPU when cpudl_find sees its free_cpus bit is set. If this happens the task will not have the opportunity to run. One example is outlined here: https://lore.kernel.org/lkml/20250110233010.2339521-1-opendmb@gmail.com Another occurs when the last deadline task is migrated from a CPU that has an offlined runqueue. The dequeue_task member of the deadline scheduler class will eventually call cpudl_clear and set the free_cpus bit for the CPU. This commit modifies the cpudl_clear function to be aware of the online state of the deadline runqueue so that the free_cpus mask can be updated appropriately. It is no longer necessary to manage the mask outside of the cpudl_set/clear functions so the cpudl_set/clear_freecpu functions are removed. In addition, since the free_cpus mask is now only updated under the cpudl lock the code was changed to use the non-atomic __cpumask functions. | ||||
| CVE-2025-68783 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-mixer: us16x08: validate meter packet indices get_meter_levels_from_urb() parses the 64-byte meter packets sent by the device and fills the per-channel arrays meter_level[], comp_level[] and master_level[] in struct snd_us16x08_meter_store. Currently the function derives the channel index directly from the meter packet (MUB2(meter_urb, s) - 1) and uses it to index those arrays without validating the range. If the packet contains a negative or out-of-range channel number, the driver may write past the end of these arrays. Introduce a local channel variable and validate it before updating the arrays. We reject negative indices, limit meter_level[] and comp_level[] to SND_US16X08_MAX_CHANNELS, and guard master_level[] updates with ARRAY_SIZE(master_level). | ||||
| CVE-2025-68784 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix a UAF problem in xattr repair The xchk_setup_xattr_buf function can allocate a new value buffer, which means that any reference to ab->value before the call could become a dangling pointer. Fix this by moving an assignment to after the buffer setup. | ||||
| CVE-2025-68786 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: skip lock-range check on equal size to avoid size==0 underflow When size equals the current i_size (including 0), the code used to call check_lock_range(filp, i_size, size - 1, WRITE), which computes `size - 1` and can underflow for size==0. Skip the equal case. | ||||
| CVE-2025-68802 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Limit num_syncs to prevent oversized allocations The exec and vm_bind ioctl allow userspace to specify an arbitrary num_syncs value. Without bounds checking, a very large num_syncs can force an excessively large allocation, leading to kernel warnings from the page allocator as below. Introduce DRM_XE_MAX_SYNCS (set to 1024) and reject any request exceeding this limit. " ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1217 at mm/page_alloc.c:5124 __alloc_frozen_pages_noprof+0x2f8/0x2180 mm/page_alloc.c:5124 ... Call Trace: <TASK> alloc_pages_mpol+0xe4/0x330 mm/mempolicy.c:2416 ___kmalloc_large_node+0xd8/0x110 mm/slub.c:4317 __kmalloc_large_node_noprof+0x18/0xe0 mm/slub.c:4348 __do_kmalloc_node mm/slub.c:4364 [inline] __kmalloc_noprof+0x3d4/0x4b0 mm/slub.c:4388 kmalloc_noprof include/linux/slab.h:909 [inline] kmalloc_array_noprof include/linux/slab.h:948 [inline] xe_exec_ioctl+0xa47/0x1e70 drivers/gpu/drm/xe/xe_exec.c:158 drm_ioctl_kernel+0x1f1/0x3e0 drivers/gpu/drm/drm_ioctl.c:797 drm_ioctl+0x5e7/0xc50 drivers/gpu/drm/drm_ioctl.c:894 xe_drm_ioctl+0x10b/0x170 drivers/gpu/drm/xe/xe_device.c:224 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:598 [inline] __se_sys_ioctl fs/ioctl.c:584 [inline] __x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:584 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xbb/0x380 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... " v2: Add "Reported-by" and Cc stable kernels. v3: Change XE_MAX_SYNCS from 64 to 1024. (Matt & Ashutosh) v4: s/XE_MAX_SYNCS/DRM_XE_MAX_SYNCS/ (Matt) v5: Do the check at the top of the exec func. (Matt) (cherry picked from commit b07bac9bd708ec468cd1b8a5fe70ae2ac9b0a11c) | ||||
| CVE-2025-68804 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/chrome: cros_ec_ishtp: Fix UAF after unbinding driver After unbinding the driver, another kthread `cros_ec_console_log_work` is still accessing the device, resulting an UAF and crash. The driver doesn't unregister the EC device in .remove() which should shutdown sub-devices synchronously. Fix it. | ||||
| CVE-2025-68807 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: fix race between wbt_enable_default and IO submission When wbt_enable_default() is moved out of queue freezing in elevator_change(), it can cause the wbt inflight counter to become negative (-1), leading to hung tasks in the writeback path. Tasks get stuck in wbt_wait() because the counter is in an inconsistent state. The issue occurs because wbt_enable_default() could race with IO submission, allowing the counter to be decremented before proper initialization. This manifests as: rq_wait[0]: inflight: -1 has_waiters: True rwb_enabled() checks the state, which can be updated exactly between wbt_wait() (rq_qos_throttle()) and wbt_track()(rq_qos_track()), then the inflight counter will become negative. And results in hung task warnings like: task:kworker/u24:39 state:D stack:0 pid:14767 Call Trace: rq_qos_wait+0xb4/0x150 wbt_wait+0xa9/0x100 __rq_qos_throttle+0x24/0x40 blk_mq_submit_bio+0x672/0x7b0 ... Fix this by: 1. Splitting wbt_enable_default() into: - __wbt_enable_default(): Returns true if wbt_init() should be called - wbt_enable_default(): Wrapper for existing callers (no init) - wbt_init_enable_default(): New function that checks and inits WBT 2. Using wbt_init_enable_default() in blk_register_queue() to ensure proper initialization during queue registration 3. Move wbt_init() out of wbt_enable_default() which is only for enabling disabled wbt from bfq and iocost, and wbt_init() isn't needed. Then the original lock warning can be avoided. 4. Removing the ELEVATOR_FLAG_ENABLE_WBT_ON_EXIT flag and its handling code since it's no longer needed This ensures WBT is properly initialized before any IO can be submitted, preventing the counter from going negative. | ||||
| CVE-2025-71195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: xilinx: xdma: Fix regmap max_register The max_register field is assigned the size of the register memory region instead of the offset of the last register. The result is that reading from the regmap via debugfs can cause a segmentation fault: tail /sys/kernel/debug/regmap/xdma.1.auto/registers Unable to handle kernel paging request at virtual address ffff800082f70000 Mem abort info: ESR = 0x0000000096000007 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x07: level 3 translation fault [...] Call trace: regmap_mmio_read32le+0x10/0x30 _regmap_bus_reg_read+0x74/0xc0 _regmap_read+0x68/0x198 regmap_read+0x54/0x88 regmap_read_debugfs+0x140/0x380 regmap_map_read_file+0x30/0x48 full_proxy_read+0x68/0xc8 vfs_read+0xcc/0x310 ksys_read+0x7c/0x120 __arm64_sys_read+0x24/0x40 invoke_syscall.constprop.0+0x64/0x108 do_el0_svc+0xb0/0xd8 el0_svc+0x38/0x130 el0t_64_sync_handler+0x120/0x138 el0t_64_sync+0x194/0x198 Code: aa1e03e9 d503201f f9400000 8b214000 (b9400000) ---[ end trace 0000000000000000 ]--- note: tail[1217] exited with irqs disabled note: tail[1217] exited with preempt_count 1 Segmentation fault | ||||
| CVE-2025-71196 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: stm32-usphyc: Fix off by one in probe() The "index" variable is used as an index into the usbphyc->phys[] array which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys then it is one element out of bounds. The "index" comes from the device tree so it's data that we trust and it's unlikely to be wrong, however it's obviously still worth fixing the bug. Change the > to >=. | ||||
| CVE-2025-71199 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: at91-sama5d2_adc: Fix potential use-after-free in sama5d2_adc driver at91_adc_interrupt can call at91_adc_touch_data_handler function to start the work by schedule_work(&st->touch_st.workq). If we remove the module which will call at91_adc_remove to make cleanup, it will free indio_dev through iio_device_unregister but quite a bit later. While the work mentioned above will be used. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | at91_adc_workq_handler at91_adc_remove | iio_device_unregister(indio_dev) | //free indio_dev a bit later | | iio_push_to_buffers(indio_dev) | //use indio_dev Fix it by ensuring that the work is canceled before proceeding with the cleanup in at91_adc_remove. | ||||
| CVE-2025-9055 | 3 Axis, Axis Communications Ab, Linux | 3 Axis Os, Axis Os, Linux | 2026-04-15 | 6.4 Medium |
| The VAPIX Edge storage API that allowed a privilege escalation, enabling a VAPIX administrator-privileged user to gain Linux Root privileges. This flaw can only be exploited after authenticating with an administrator-privileged service account. | ||||
| CVE-2025-40223 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: most: usb: Fix use-after-free in hdm_disconnect hdm_disconnect() calls most_deregister_interface(), which eventually unregisters the MOST interface device with device_unregister(iface->dev). If that drops the last reference, the device core may call release_mdev() immediately while hdm_disconnect() is still executing. The old code also freed several mdev-owned allocations in hdm_disconnect() and then performed additional put_device() calls. Depending on refcount order, this could lead to use-after-free or double-free when release_mdev() ran (or when unregister paths also performed puts). Fix by moving the frees of mdev-owned allocations into release_mdev(), so they happen exactly once when the device is truly released, and by dropping the extra put_device() calls in hdm_disconnect() that are redundant after device_unregister() and most_deregister_interface(). This addresses the KASAN slab-use-after-free reported by syzbot in hdm_disconnect(). See report and stack traces in the bug link below. | ||||