| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| P-Net before 1.0.3 enters an infinite loop when handling a read request for the PDPortDataCheck record with subslot 0 (whole module). The loop over the ports never advanced to the next port, so the request never completes and the device stops responding. A remote unauthenticated attacker can use this to cause a denial of service. |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.mail.imap4.IMAP4Server reaches twisted.mail.imap4.parseNestedParens with a negative literal size in an authenticated SEARCH command after the client enters the selected mailbox state. The negative size moves the parser cursor below zero, and Python's negative indexing prevents the synchronous scanning loop from terminating. The loop freezes the single-threaded reactor, stopping other IMAP connections and any SMTP or POP3 services hosted in the same process until restart. This issue is fixed in version 26.10.0rc1. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix soft lockup in the netlink flow dump
A production compute node carrying a few thousand datapath flows hit a
soft lockup inside a single netlink flow dump and panicked.
ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it
emits, and that releases stats->lock with spin_unlock_bh() once per
CPU that has touched the flow. Every release is a local_bh_enable(),
and each one runs the pending softirq backlog in the dumping thread's
own context.
The skb bounds the flows one callback emits, but not the softirq work
it absorbs. On a CPU that carries the box's packet load the backlog
refills as fast as it drains, so the dumping thread becomes that CPU's
softirq engine. It never sleeps and it has no reschedule point, so
under voluntary preemption nothing can take the CPU away from it:
neither the ksoftirqd the kernel woke to take the work over, nor the
stopper thread the softlockup detector dispatches to refresh its
timestamp.
Hold BH off across the whole callback instead, the way
ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop
draining softirqs. The loop already runs under rcu_read_lock() and
cannot sleep. What it gives up is preemption under CONFIG_PREEMPT,
since a BH-off region is not preemptible outside PREEMPT_RT. The
region stays short: the skb caps the flows one callback emits, and
empty buckets cost no skb space but are each visited once per dump, as
the cursor only moves forward. The table grows on insert and shrinks
only on flush, so the walk is bounded by the largest flow count the
datapath has held. The softirq backlog the callback used to absorb has
no bound at all. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: avoid repeated scans in evict_inodes()
We observed hung tasks when users attempted to unmount a filesystem
after its disk had been removed while still in use. During device
removal, fs_bdev_mark_dead() calls evict_inodes() while holding s_umount.
Each time evict_inodes() drops s_inode_list_lock to reschedule, it
restarts the walk from the head of s_inodes. With many referenced inodes
at the head of the list, these restarts repeatedly scan the same inodes
without reclaiming them. This can keep s_umount held for a long time,
blocking concurrent umount attempts and triggering hung-task reports.
Keep the current inode, already marked I_FREEING, out of the disposal
batch until s_inode_list_lock is reacquired. Resume the walk from this
inode and dispose of it in a later batch or at the end of the walk.
The zero-refcount and state checks under i_lock allow this walker to
claim the inode by setting I_FREEING and removing it from the LRU.
Other reclaimers skip the inode, leaving this walker responsible for
eviction. Only evict() removes it from s_inodes, so keeping it out of
the disposal batch ensures that it remains on the list while the lock
is dropped. After reacquiring the lock, reading its current next pointer
accounts for concurrent removal of following inodes.
The existing inode lifetime rules prohibit acquiring a reference to an
inode marked I_FREEING or I_WILL_FREE. __iget() requires its caller to
hold i_lock and establish that taking a reference is valid. Inode lookup
and igrab() check these flags under i_lock when acquiring a reference
from zero. ihold() requires an existing reference, which would keep
i_count nonzero and prevent this walker from claiming the inode. These
rules already allow iput_final() and the inode shrinker to release
i_lock after setting I_FREEING and before eviction completes.
A temporary __iget() reference would also keep the inode on the list,
but its release must preserve last-reference handling. Another user can
acquire a reference, update lazy timestamps and drop its reference while
the pin is held. If the pin becomes the last reference, dropping it with
atomic_dec_and_test() and evicting directly bypasses iput()'s lazytime
handling and can lose those timestamp updates.
Releasing the pin with iput() preserves that handling, but does not
guarantee eviction. fs_bdev_mark_dead() runs with SB_ACTIVE set, so iput()
may retain the inode in cache, whereas evict_inodes() must evict eligible
zero-reference inodes. The inode may also have been freed when iput()
returns, so the walker cannot then use it to force eviction. Using
I_FREEING preserves the existing eviction behavior without introducing
an additional last-reference transition.
The xfstests auto group passed on ext4 and XFS with known unrelated
failures excluded. No new issues were observed, and the previously
reproducible hung task no longer occurs with this patch. |
| In EmberZNet 9.1.1 and earlier, a malformed Discover Attributes command can result in a loop with unreachable exit condition (infinite loop). These messages must come from a device that has already joined the network. Only devices supporting manufacturer-specific clusters are impacted. |
| An Integer Overflow vulnerability in the DPI certificate scanner in Juniper Networks Session Smart Router allows an unauthenticated remote attacker to cause a denial of service via a specially crafted TLS server certificate. |
| Kafka Streams derives its stream-time clock from record timestamps. PunctuationSchedule.next() computed the next punctuation time as timestamp + (intervalsMissed + 1) * interval with no overflow check. A record with a timestamp at or near Long.MAX_VALUE advances stream time to that value, so the next stream-time punctuation overflows to a negative time. PunctuationQueue then re-queues that time and loops on it indefinitely while holding a lock, stalling the StreamThread.
Impact:
A single record is enough. The affected StreamThread stops processing, and because the record stays in the topic the hang returns on restart; an application whose partitions are all affected becomes unresponsive. Only the Streams application is affected, not the brokers or the cluster. Triggering it needs write access to a source topic whose topology uses stream-time punctuation, and a broker that stores the record: brokers from Apache Kafka 4.0.0 reject such a timestamp by default (log.message.timestamp.after.max.ms, one hour), so it is reachable only on older brokers or where that bound has been relaxed.
Mitigation:
Upgrade Kafka Streams to 4.2.2, 4.3.2, or 4.4.0. As defense in depth, keep log.message.timestamp.after.max.ms bounded on source topics and restrict write access to them.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the next punctuation time is computed with overflow-checked arithmetic (clamped to Long.MAX_VALUE), and a rescheduled punctuation is re-queued only when its time moves forward. |
| russh is a Rust SSH client and server library that includes an SSH agent protocol implementation. From 0.60.0 until 0.65.0, channel-open parsing accepts a peer-declared maximum_packet_size of zero and passes it into ChannelTx::poll_writable in russh/src/channels/io/tx.rs. The Channel::data, Channel::make_writer, and Channel::into_stream asynchronous write paths then calculate a writable size of zero and remain pending forever because window adjustments cannot satisfy a static zero packet maximum. An authenticated client can strand server writes, and a malicious server can strand client writes, allowing affected tasks, channels, and connections to accumulate without surfacing an error. This issue is fixed in version 0.65.0. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.20.1, removing an object from a crafted cyclic PDF tree, such as an outline item, can enter an infinite loop and block the current process. This issue is fixed in version 6.20.1. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: dwmac1000: clear the RGMII status interrupt
Since commit 2e2c878a3141 ("net: stmmac: remove SGMII/RGMII/SMII
interrupt handling") nothing on the RGMII path reads GMAC_RGSMIIIS, so
RGSMIIIS stays pending behind GMAC_INT_MASK from the first link change
on. stmmac_resume() resets the MAC in stmmac_hw_setup(); the reset sets
GMAC_INT_MASK to 0 until dwmac1000_core_init() writes the mask again,
and the pending status storms the line:
dwmac_dma_interrupt: unexpected status 04000000
A register dump at the first message on ODROID-HC4 showed it:
core int_status 00000001 int_mask 00000000 pmt 00000000 rgsmiiis 0000000d
When the resume thread runs on the CPU that takes the MAC interrupt,
the storm starves it: a soft lockup, then a watchdog reset or a hang.
Read GMAC_RGSMIIIS in dwmac1000_irq_status() when the status is not
masked, as the driver did before 2e2c878a3141; the read clears it.
Wake-on-LAN resume from s2idle with the resume thread and the MAC
interrupt on one CPU: Helios64 (dwmac-rk), 7.3-rc6, soft-locked in 3 of
3 resumes without a fix and in 0 of 10 with this patch; it ran with an
out-of-tree dwmac-rk change that keeps the GMAC powered across suspend.
ODROID-HC4 (dwmac-meson8b): 0 of 10 with this patch, 2 of 2 without a
fix on a 7.3-rc5 build. irq_rgmii_n went up by one per resume. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, inefficient algorithmic complexity and infinite loop vulnerabilities in RadWordsProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted DOCX, DOC, RTF or HTML document. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, inefficient algorithmic complexity and resource allocation vulnerabilities in RadPdfProcessing and AI document summarization and question answering allow an unauthenticated attacker to terminate or hang the host process via a crafted PDF document or document text submitted for summarization or question answering. |
| In Progress® Telerik® Document Processing Libraries prior to version 2026.3.1027, uncontrolled recursion, infinite loop, unchecked loop condition and inefficient regular expression vulnerabilities in RadSpreadProcessing and RadSpreadStreamProcessing allow an unauthenticated attacker to terminate or hang the host process via a crafted XLSX or XLS workbook or formula. |
| Loop with unreachable exit condition in the PKCS#12 key derivation (Pkcs12ParametersGenerator) in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows an attacker who can supply a PKCS#12 (PFX) file, or a PKCS#8 encrypted private key that uses a PKCS#12 password-based encryption algorithm, to cause a denial of service through CPU exhaustion via an iteration count of zero or below, because the derivation loop ran until its counter equalled the count, so for such a count it wrapped through about 2^32 iterations before the MAC or the password could be checked. A 75-byte PFX file with a negative MacData iteration count kept Pkcs12Store.Load busy for many minutes. |
| ApostropheCMS is an open-source Node.js content management system. In sanitize-html 2.18.0, when an <iframe> is not allowed and disallowedTagsMode is 'discard' (the defaults), its raw-text content is re-sanitized by a recursive call to sanitizeHtml(text, options). The recursion has no bound and starts each nested call with a fresh state. This vulnerability is fixed in 2.18.1. |
| Loop with unreachable exit condition in Pkcs12Store.GetCertificateChain in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows an attacker who can supply a crafted PKCS#12 file to an application that loads it and requests a key entry's certificate chain to cause a denial of service, in which the call never returns and consumes CPU and memory until an OutOfMemoryException, via certificates whose issuer links form a cycle, for example two certificates whose AuthorityKeyIdentifier extensions each identify the other's public key. This happens because the chain-building loop stops only when no issuer is found or a certificate links to itself, and keeps no record of certificates already visited. The key-identifier links are followed without checking signatures. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.20.0, an attacker can craft an incomplete PDF that ends inside a standard cross-reference table, causing pypdf to mishandle the unexpected end of file and enter an infinite loop. This issue is fixed in version 6.20.0. |
| A malicious X server could send malformed RECORD EnableContext reolies that can cause a X client using the parse_reply_call_callback function in libXtst before 1.2.6 to enter a endless loop. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow can enter an infinite loop while rewriting PDF pages. PdfParser.rewrite_pages() follows Parent relationships without detecting a cycle in the page tree. An attacker can supply a cyclic PDF to an application that appends an image to that PDF. This can hold the worker at full CPU and deny service. This issue is fixed in version 13.0.0. |
| Pillow is a Python imaging library. From 5.1.0 until 13.0.0, Pillow can exhaust resources while parsing an existing PDF during an append operation. PdfParser follows page-tree child references without cycle or duplication tracking and follows previous-trailer chains with only an exact repeated-offset guard, so deep or cyclic page trees and long chains of unique trailer offsets can exhaust the Python stack. Repeated non-cyclic /Kids references can also cause super-linear CPU and memory use. An attacker can supply such a PDF to an application that calls Image.save with PDF append enabled. This can raise an uncaught RecursionError or consume excessive CPU and memory before output is written, causing denial of service. This issue is fixed in version 13.0.0. |
