| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/packet: guard the ll header push in packet_rcv_spkt()
packet_rcv_spkt() restores the link layer header with
skb_push(skb, skb->data - skb_mac_header(skb));
That subtraction is only meaningful when the device actually has a link
layer header. packet_rcv() and tpacket_rcv() both wrap it in
dev_has_header(), which is also the predicate the block comment at the
top of the file states the restore in terms of; packet_rcv_spkt() does
not. commit d549699048b4 ("net/packet: fix packet receive on L3
devices without visible hard header") introduced the helper and changed
the two call sites, and this one stayed behind.
A device without a visible ll header can leave skb->mac_header at the
0xFFFF sentinel that __alloc_skb() initialises it to. A CAN skb does:
init_can_skb() sets pkt_type and ip_summed but does not reset the
headers, and commit 9f10374bb024 ("can: remove private CAN skb
headroom infrastructure") dropped the skb_reset_*_header() calls that
used to be there. skb_mac_header() is then 0xFFFF, the length becomes
a large negative number and skb_push() reports it through
skb_under_panic() -- from softirq context, so it is a full system panic
even with panic_on_oops=0:
skbuff: skb_under_panic: text:ffffffff8bd21bc1 len:-65455 put:-65471 head:... data:... tail:0x50 end:0x180 dev:can0
kernel BUG at net/core/skbuff.c:214!
RIP: 0010:skb_panic+0x50/0x60
Call Trace:
<IRQ>
skb_push+0x38/0x40
packet_rcv_spkt+0xe1/0x170
__netif_receive_skb_core.constprop.0+0x7e8/0xd30
...
Kernel panic - not syncing: Fatal exception in interrupt
The socket type is reachable: packet_create() accepts SOCK_PACKET
alongside SOCK_RAW and SOCK_DGRAM behind the same CAP_NET_RAW check,
and neither the socket length nor a capability check keeps it away
from a CAN interface.
The missing skb_reset_*_header() calls in init_can_skb() are a
regression in their own right and are being fixed separately, but a
packet socket should not turn a link layer that did not initialise its
mac header into a kernel panic. Guard the push the way the other two
receive paths do.
Tested on v7.3-rc5 under QEMU with a slcan device on a pty, which is
the driver RX path: vcan does not reproduce it, because can_send()
resets the headers on the way out. One SOCK_PACKET socket bound to
can0 and one frame written into the line discipline panics an
unpatched kernel with the trace above; the same image with this patch
prints no panic and powers off normally. Both kernels are this tree,
defconfig plus CONFIG_CAN_SLCAN=y, differing only in this hunk. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: adau1372: allow sleepy powerdown GPIOs
gpiod_set_value() emits a WARN when the GPIO provider indicates that it
can sleep, as is typical for I2C controlled GPIO expanders. Since the
powerdown GPIO is only manipulated in process context, use the _cansleep
variant instead. This lets the driver use sleepy GPIOs to power off the
chip. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: io: Reject non-user protection in ioremap_prot()
Mapping a stack-top page via /dev/mem with PROT_NONE and then
reading that process's /proc/<pid>/cmdline triggers a spurious WARN
in ioremap_prot() through generic_access_phys():
WARNING: ./arch/arm64/include/asm/io.h:275 at generic_access_phys
Call trace:
generic_access_phys+0x1c8/0x228 (P)
__access_remote_vm+0x2b4/0x398
access_remote_vm+0x14/0x30
get_mm_cmdline+0xf8/0x2a0
proc_pid_cmdline_read+0x68/0x120
generic_access_phys() passes the protection derived from the user PTE
to ioremap_prot(). On arm64, a PROT_NONE mapping is represented by a
present-invalid PTE, so pte_present() still returns true and the
protection reaches ioremap_prot().
A PROT_NONE mapping does not have PTE_USER, causing the existing
WARN_ON_ONCE() in ioremap_prot() to fire even though this is a valid
user mapping. Execute-only mappings have the same issue and must not
be readable through this path either.
ioremap_prot() should therefore reject protection values without
PTE_USER without warning. This makes the access fail cleanly for
PROT_NONE and execute-only mappings while retaining the existing
user-protection contract. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Fix self-redirect copied_seq double-counting
When a BPF stream_verdict program redirects an skb back to the same
socket (self-redirect with BPF_F_INGRESS), sk_psock_verdict_apply()
calls tcp_eat_skb() which advances tcp_sk->copied_seq. However, the
skb is then delivered to the socket's psock ingress queue and later
read by tcp_bpf_recvmsg_parser(), which also advances copied_seq via
the copied_from_self accounting path. This double-counting causes
copied_seq to advance by 2x the actual data length, triggering:
TCP recvmsg seq # bug 2: copied BF2E806, seq BF2E7FD, \
rcvnxt BF2E806, fl 0
WARNING: net/ipv4/tcp.c:2745 at tcp_recvmsg_locked+0x72b/0x2640
Call Trace:
tcp_recvmsg+0x10a/0x500
sock_recvmsg+0x168/0x1d0
__sys_recvfrom+0x19a/0x2a0
__x64_sys_recvfrom+0xe4/0x1f0
do_syscall_64+0xf7/0x530
entry_SYSCALL_64_after_hwframe+0x77/0x7f
cleanup rbuf bug: copied BF2E806 seq BF2E806 rcvnxt BF2E806
WARNING: net/ipv4/tcp.c:1609 at tcp_cleanup_rbuf+0xf2/0x1c0
Call Trace:
tcp_recvmsg_locked+0x8d1/0x2640
tcp_recvmsg+0x10a/0x500
sock_recvmsg+0x168/0x1d0
__sys_recvfrom+0x19a/0x2a0
__x64_sys_recvfrom+0xe4/0x1f0
do_syscall_64+0xf7/0x530
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Fix this by converting self-redirect verdict to __SK_PASS at the
beginning of sk_psock_verdict_apply(). This bypasses the
__SK_REDIRECT case entirely (which calls sk_psock_eat_skb), letting
the __SK_PASS path queue the skb to the psock ingress queue. The
data is then read via tcp_bpf_recvmsg_parser(), which advances
copied_seq exactly once through copied_from_self. Cross-socket
redirects continue through __SK_REDIRECT with sk_psock_eat_skb()
unchanged. |
| A vulnerability was found in Avahi. A reachable assertion exists in the avahi_escape_label() function. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: hdmi: Move packet RAM enable to PM runtime
Audio can be triggered by the HPD handler and start up before video has
been restored, calling vc4_hdmi_write_infoframe() for the audio infoframe.
vc4_hdmi_write_infoframe() needs Packet RAM to be on to store the
infoframe, however, if the video hasn't been enabled,
vc4_hdmi_encoder_post_crtc_enable() hasn't been called and therefore, the
Packet RAM can be disabled by the time vc4_hdmi_write_infoframe() executes,
causing the following splat:
[ 201.570266] ------------[ cut here ]------------
[ 201.570293] Packet RAM has to be on to store the packet.
[ 201.570367] WARNING: drivers/gpu/drm/vc4/vc4_hdmi.c:683 at vc4_hdmi_write_infoframe+0x404/0x494 [vc4], CPU#0: wireplumber/1606
[...]
[ 201.658650] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 201.758499] Call trace:
[ 201.760967] vc4_hdmi_write_infoframe+0x404/0x494 [vc4] (P)
[ 201.766607] vc4_hdmi_write_audio_infoframe+0x1c/0x28 [vc4]
[ 201.772247] write_infoframe+0xbc/0x140 [drm_display_helper]
[ 201.777975] drm_atomic_helper_connector_hdmi_update_audio_infoframe+0x80/0xdc [drm_display_helper]
[ 201.787140] vc4_hdmi_audio_prepare+0x4ac/0x570 [vc4]
[ 201.792252] drm_connector_hdmi_audio_prepare+0x24/0x30 [drm_display_helper]
[ 201.799390] hdmi_codec_prepare+0x100/0x160 [snd_soc_hdmi_codec]
[ 201.805471] snd_soc_pcm_dai_prepare+0xd4/0x100 [snd_soc_core]
[ 201.811375] __soc_pcm_prepare+0x60/0x12c [snd_soc_core]
[ 201.816752] soc_pcm_prepare+0x34/0x58 [snd_soc_core]
[ 201.821863] snd_pcm_do_prepare+0x70/0x8c [snd_pcm]
[ 201.826798] snd_pcm_action_nonatomic+0xe4/0x174 [snd_pcm]
[ 201.832350] snd_pcm_prepare+0xc8/0xd8 [snd_pcm]
[ 201.837021] snd_pcm_common_ioctl+0x458/0x614 [snd_pcm]
[ 201.842308] snd_pcm_ioctl+0x30/0x48 [snd_pcm]
[ 201.846802] __arm64_sys_ioctl+0x88/0xd8
[ 201.850769] invoke_syscall+0x48/0xf4
[ 201.854470] el0_svc_common+0x80/0xd8
[ 201.858171] do_el0_svc+0x1c/0x28
[ 201.861520] el0_svc+0x3c/0xb0
[ 201.864605] el0t_64_sync_handler+0x68/0xdc
[ 201.868834] el0t_64_sync+0x198/0x19c
[ 201.872536] ---[ end trace 0000000000000000 ]---
Considering that Packet RAM enable is essentially a power management
configuration, move its enabling/disabling to the Runtime PM hooks.
Note that post_crtc_disable() still stops all infoframes, but keeps Packet
RAM enabled, leaving it to be disabled by runtime suspend. |
| vLLM is an inference and serving engine for large language models. From 0.11.1 until 0.32.0, the DeepSeek-OCR, DeepSeek-OCR-2, and Unlimited-OCR image path allows a remote client that can reach the OpenAI-compatible API to submit a legal image whose normalized pixels sum to zero when that image is alone in its per-step encoder batch. _parse_and_validate_image_input returns no embedding, embed_multimodal propagates that value, and sanity_check_mm_encoder_outputs triggers a fatal assertion that shuts down the engine for all users. This issue is fixed in version 0.32.0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate GUD_ROTATION_0 is present in supported rotations
The rotation argument to drm_plane_create_rotation_property() is set to
DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as
the supported_rotations argument. The driver never validates that
GUD_ROTATION_0 is present, so a device that omits it from its
GUD_PROPERTY_ROTATION triggers the
WARN_ON(rotation & ~supported_rotations) in
drm_plane_create_rotation_property()
Fix this by skipping the creation of rotation property if the device
doesn't have the GUD_ROTATION_0 bit |
| In the Linux kernel, the following vulnerability has been resolved:
printk: Don't WARN on kthread_run failure.
Since __kthread_create_on_node() returns -EINTR upon SIGKILL,
we should not use WARN_ON() in order to catch kthread_run() failure. |
| A security flaw has been discovered in ggml-org llama.cpp up to 0.7.0. Affected by this vulnerability is an unknown functionality of the file src/llama-sampler.cpp of the component Mirostat Sampler. The manipulation results in reachable assertion. It is possible to launch the attack remotely. The project was informed of the problem early through a pull request but has not reacted yet. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: handle set_blocksize failures
ntfs3 uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
ima: return error early if file xattr cannot be changed
During early boot, the filesystem is read-only and any changes
to xattrs are not allowed. This fails in case of ext4 because
changing xattr starts an ext4 transaction which fails with the
following warning.
WARNING: fs/ext4/ext4_jbd2.c:75 at ext4_journal_check_start+0x63/0xa0 [ext4], CPU#1: systemd-sysroot/561
CPU: 1 UID: 0 PID: 561 Comm: systemd-sysroot Not tainted 6.19.12-1-default #1 PREEMPT(voluntary) openSUSE Tumbleweed c2dfc3c9d9f6f1233251c5d4410574fe82a348ee
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS unknown 02/02/2022
RIP: 0010:ext4_journal_check_start+0x63/0xa0 [ext4]
Call Trace:
__ext4_journal_start_sb+0x3e/0x180 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1]
ext4_xattr_set+0x104/0x150 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1]
__vfs_setxattr+0x9a/0xd0
__vfs_setxattr_noperm+0x76/0x1f0
ima_appraise_measurement+0x23e/0xe40
ima_d_path+0x5a/0xd0
process_measurement+0xb29/0xc40
? copy_from_kernel_nofault+0x21/0xe0
? fscrypt_file_open+0xc0/0xe0
? ext4_file_open+0x60/0x490 [ext4 6d025f3bc52c89a957b89a89d211fadf5e9434e1]
? bpf_prog_31efb7c56239148b_restrict_filesystems+0xab/0x126
? __bpf_prog_exit+0x23/0xd0
? __bpf_tramp_exit+0xd/0x50
? bpf_trampoline_6442530367+0x9f/0xea
ima_file_check+0x57/0x80
security_file_post_open+0x50/0xf0
path_openat+0x493/0x1650
do_filp_open+0xc7/0x170
Detect the state of the file early and return the error. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: handle set_blocksize failures
isofs uses buffer_heads, which don't handle block size > PAGE_SIZE well.
Without this, mounting we will hit the
BUG_ON(offset >= folio_size(folio));
in folio_set_bh on the first __bread_gfp call. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_port: recognize UPIO_AU
My MIPS Alchemy systems generate the following warning during
probe of the 8250 driver:
WARNING: drivers/tty/serial/8250/8250_port.c:462 at set_io_from_upio+0xfc/0x124, CPU#0: swapper/0/1
Unsupported UART type 4
[...]
[<80521d40>] set_io_from_upio+0xfc/0x124
[<80521dfc>] serial8250_set_defaults+0x94/0xe0
[<80520fb4>] serial8250_register_8250_port+0x288/0x51c
[<805214ec>] serial8250_probe+0x160/0x1e8
[<8053b5f0>] platform_probe+0x64/0x90
The least invasive fix is to recognize UPIO_AU (type 4) in set_io_from_upio()
and do nothing, since all parameters have already been set up in
8250_rt288x.c::au_platform_setup().
Run-tested on Alchemy Au1300 platform. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: do not warn on route notification size race
fib6_info_hw_flags_set() sizes the skb with rt6_nlmsg_size() and later
fills it with rt6_fill_node(). With nexthop compatibility mode enabled,
a concurrent replacement can grow the group between these independent
snapshots. rt6_fill_node() can then legitimately return -EMSGSIZE, so
the warning does not prove a sizing bug.
Remove the warning. The existing error path still frees the skb and
reports the error to listeners. |
| In the Linux kernel, the following vulnerability has been resolved:
tee: shm: reject zero-sized allocations in tee_dyn_shm_alloc_helper()
tee_dyn_shm_alloc_helper() derives nr_pages from a caller-supplied size
and passes it to alloc_pages_exact() without checking it. For size == 0
nr_pages is 0, and alloc_pages_exact(0) calls get_order(0), which is
documented as undefined and returns BITS_PER_LONG - PAGE_SHIFT. The page
allocator then trips its order > MAX_PAGE_ORDER warning and fails the
allocation; on a panic_on_warn kernel that ends the boot.
This can be triggered by TEE_IOC_SHM_ALLOC with struct
tee_ioctl_shm_alloc_data where size is 0.
Reject a zero page count, as register_shm_helper() already does for the
register path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v2.0 enc/dec rings
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit e2b5499fca55f1a32960a311bbb62e35891eaf73) |
| The Object Transfer Service server builds its Object Action Control Point (OACP) response indication in oacp_ind_send() (subsys/bluetooth/services/ots/ots_oacp.c). Before this fix the four-byte Checksum Value field was appended whenever the requested op code was BT_GATT_OTS_OACP_PROC_CHECKSUM_CALC, regardless of the result code. The response payload is a bare, uninitialized four-byte stack buffer declared with NET_BUF_SIMPLE_DEFINE(resp_param, sizeof(uint32_t)) in bt_gatt_ots_oacp_write(), and it is filled only on the success path of oacp_checksum_proc_validate(). On every failure path the buffer is still empty, so net_buf_simple_pull_le32() was invoked on a zero-length buffer.
The OACP characteristic and its client characteristic configuration descriptor are declared with BT_GATT_PERM_WRITE and BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, so no pairing, encryption, or authentication is required. Any peer within radio range that can connect to a device running the OTS server can enable OACP indications and write a nine-byte Calculate Checksum command that fails validation — for example by issuing it with no object selected, which returns BT_GATT_OTS_OACP_RES_INV_OBJ. Because oacp_command_decode() accepts the Calculate Checksum op code unconditionally (it is not guarded by CONFIG_BT_OTS_OACP_CHECKSUM_SUPPORT), builds without checksum support are reachable too: they answer BT_GATT_OTS_OACP_RES_OPCODE_NOT_SUP and take the same bad path.
On builds with CONFIG_ASSERT enabled, the zero-length pull trips the assertion inside net_buf_simple_pull_mem() and panics the device, giving a remotely triggered denial of service. On builds with assertions disabled there is no check: the pull returns the untouched stack array and four bytes of uninitialized stack memory are copied into the indication and transmitted to the peer, repeatable on every request. The disclosure is bounded to four bytes per request and the write stays inside the seven-byte res indication buffer, so there is no memory corruption; the impact is uninitialized-memory disclosure plus an availability loss in assertion-enabled configurations. |
| In the Linux kernel, the following vulnerability has been resolved:
freevxfs: don't BUG() on unknown typed-extent type
vxfs_bmap_typed() handles four typed-extent types and calls BUG() in
its default case, so an on-disk typed extent with any other type value
crashes the kernel. It is reachable from ioctl(FIBMAP) on a regular
file:
kernel BUG at fs/freevxfs/vxfs_bmap.c:230!
RIP: vxfs_bmap_typed fs/freevxfs/vxfs_bmap.c:230 [inline]
vxfs_bmap1+0x128a/0x12d0 fs/freevxfs/vxfs_bmap.c:257
Replace the BUG() with WARN_ON_ONCE() and return 0 -- the value
vxfs_bmap_typed() already returns on failure (and from the DEV4 case
above); vxfs_getblk() maps 0 to -EIO, so the ioctl fails cleanly. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: mld: don't WARN on WoWLAN suspend w/o netdetect
Clearly, from a user perspective, it must be valid to configure
WoWLAN and then suspend while not connected to a network. Since
mac80211 doesn't distinguish these cases and simply calls the
driver to suspend whenever WoWLAN is configured, the driver has
to cleanly handle the case where it's called for WoWLAN, it's
not connected but there's also no netdetect configured.
Remove the WARN_ON() and keep returning 1 to disconnect and
then suspend. |
