| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libiscsi: Validate the ITT reflected in a Reject PDU
A Reject PDU carries a copy of the header it rejects, and
iscsi_handle_reject() takes the ITT out of that copy to find the task to
clean up:
memcpy(&rejected_pdu, data, sizeof(struct iscsi_hdr));
...
task = iscsi_itt_to_task(conn, rejected_pdu.itt);
That value is whatever the target put there. iscsi_itt_to_task() bounds
the index against cmds_max and checks nothing else, so any task in the
pool can be named, and iscsi_nop_out_rsp() then completes it.
An index that has never been used gives a NULL task->conn: the pool is
zeroed at session setup and conn is assigned only when a task is
allocated. If the task was used and returned, iscsi_complete_task() hits
its WARN_ON_ONCE(task->state == ISCSI_TASK_FREE) and the refcount
underflows. An in-flight SCSI command is completed as successful - a 1
MiB read returned 1048576 with none of its buffer written and no
warning.
Validate the reflected ITT the way iscsi_itt_to_ctask() validates a
command ITT, and require the task to be in flight and not a SCSI
command.
[ 6.248477] Oops: general protection fault, probably for non-canonical address 0xdffffc000000000c: 0000 [#1] SMP KASAN NOPTI
[ 6.249357] KASAN: null-ptr-deref in range [0x0000000000000060-0x0000000000000067]
[ 6.249951] CPU: 1 UID: 0 PID: 0 Comm: swapper/1 Not tainted 7.2.0-rc5-ISCSI1-gf5098b6bae76 #1 PREEMPT(lazy)
[ 6.250718] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 6.251616] RIP: 0010:iscsi_nop_out_rsp.constprop.0+0x46/0x160
[ 6.252043] Code: c1 ea 03 48 83 ec 08 80 3c 02 00 0f 85 f5 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 8b 6b 58 48 8d 7d 60 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 c0 00 00 00 48 8b 45 60 48 39 c3 74 50 48 b8 00
[ 6.252813] RSP: 0018:ffff88806c907b80 EFLAGS: 00010206
[ 6.253042] RAX: dffffc0000000000 RBX: ffff88800607e000 RCX: ffffffff8d571a25
[ 6.253345] RDX: 000000000000000c RSI: ffff88806c907c38 RDI: 0000000000000060
[ 6.253642] RBP: 0000000000000000 R08: 0000000000000000 R09: fffffbfff235a504
[ 6.253947] R10: 0000000000000003 R11: 7463656e6e6f6320 R12: 0000000000000000
[ 6.254251] R13: 0000000000000000 R14: ffff88806c907c38 R15: 0000000000000000
[ 6.254549] FS: 0000000000000000(0000) GS:ffff8880d95bc000(0000) knlGS:0000000000000000
[ 6.254887] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 6.255140] CR2: 00007fc393e8ffc0 CR3: 0000000005252006 CR4: 0000000000770ef0
[ 6.255439] PKRU: 55555554
[ 6.255564] Call Trace:
[ 6.255674] <IRQ>
[ 6.255768] __iscsi_complete_pdu+0x18bf/0x22a0
[ 6.256733] iscsi_complete_pdu+0x54/0xa0
[ 6.256905] iscsi_tcp_data_recv_done+0xf4/0x250
[ 6.257103] iscsi_tcp_recv_skb+0x31e/0xec0
[ 6.257680] iscsi_sw_tcp_recv+0x12f/0x390
[ 6.258061] __tcp_read_sock+0x1ab/0x810
[ 6.258853] iscsi_sw_tcp_data_ready+0x18b/0x510
[ 6.259808] tcp_data_queue+0x1f13/0x4cd0
[ 6.260567] tcp_rcv_established+0x8a5/0x3a00
[ 6.261931] tcp_v4_do_rcv+0x449/0x960
[ 6.262269] tcp_v4_rcv+0x2245/0x3bc0 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: st: Fix use-after-free race between st_remove() and st_open()
st_remove() drops the probe reference on the scsi_tape with kref_put()
and only afterwards removes its index from st_index_idr. If that was the
last reference, scsi_tape_release() frees the structure while it is
still published in the idr.
scsi_tape_get(), called from st_open(), looks up the tape in
st_index_idr and takes a reference under st_ref_mutex and
st_index_lock. remove_cdevs() does not wait for opens that are already
past chrdev_open(), so an open that is blocked on st_ref_mutex while
st_remove() holds it can take the mutex as soon as st_remove() drops it,
find the freed tpnt in the idr and call kref_get() on it:
BUG: KASAN: slab-use-after-free in st_open
Write of size 4 ...
st_open (drivers/scsi/st.c:254 drivers/scsi/st.c:1291)
chrdev_open
...
Freed by task ...:
kfree
st_remove (drivers/scsi/st.c:4512)
Remove the index from the idr before dropping the reference, all under
st_ref_mutex. A concurrent scsi_tape_get() now either runs first and
holds a valid reference that keeps the tape alive, or runs afterwards
and finds nothing, so st_open() fails with -ENXIO.
This restores the ordering st_remove() had before the conversion to
st_index_idr, where the tape was unpublished from scsi_tapes[] before
the final kref_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
firewire: core: fix race condition in split transaction handling
For a split transaction, either fw_core_handle_response() or
split_transaction_timeout_callback() may manipulate the same transaction
entry in the pending transaction list. The return value of timer_delete()
is used to determine which function handles the entry. If the transaction
is a split transaction and timer_delete() returns zero, the timeout
callback may already be running. In this case, the response handler must
leave the entry in the list for the timeout callback to remove.
A previous code refactoring broke this behavior, introducing a race
condition in which both functions could process the same transaction.
This could lead to a use-after-free on the transaction initiator side.
Fix the regression by ensuring that the response handler does not process
the transaction when timer_delete() returns zero. The timeout callback is
responsible for removing the entry from the pending transaction list. |
| A malicious actor with access to the network could exploit a Binding to an Unrestricted IP Address vulnerability found in WiFiman Desktop to obtain information about the host device. |
| In the RingRTC library before 2.72.0 for Signal, a peer that saturates a call's FSM queue can interfere with the ability of a local hangup to tear the call (with its audio and perhaps also video track) down. |
| GNU mtools before 4.0.50 has an out-of-bounds write in parse_vses in vfat.c. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock: treat TCP_CLOSING as once-established
Handle the TCP_ESTABLISHED -> TCP_CLOSING transition on OP_RST, which can
race with the connect loop. Immediately break and return 0 on
ESTABLISHED/CLOSING. The return value of connect() should reflect what
happened up to the point the connection was established or failed. Events
that occur afterwards must not affect it. E.g. even if OP_RW has already
set sk_err, connect() should still return 0, not ENOBUFS because of it.
Adapt the inaccurate comment above signal_pending().
Resetting a socket that is still present in connected_table can lead to
memory corruption. The reporter noted lost transports for in-flight skbs,
and I have reproduced crashes caused by re-insertion into connected_table.
list_add double add: new=, prev=, next=.
kernel BUG at lib/list_debug.c:35!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:__list_add_valid_or_report+0x11f/0x130
Call Trace:
vsock_insert_connected.cold+0xe/0x13
virtio_transport_recv_pkt+0x10e9/0x1460
vsock_loopback_work+0x305/0x480
process_one_work+0xe4c/0x1560
worker_thread+0x4f1/0xd60
kthread+0x36e/0x470
ret_from_fork+0x47b/0x6b0
ret_from_fork_asm+0x1a/0x30
This fix is supplementary to commit 002541ef650b ("vsock: Ignore
signal/timeout on connect() if already established"). Details under Link. |
| A malicious actor with local access and low privileges could exploit an External Control of File Name or Path vulnerability found in WiFiman Desktop to execute arbitrary commands with root privileges on the host device. |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| A flaw was found in sg3_utils. The sg_inq command, when invoked with the --export option, outputs device identification data without sanitizing control characters in SCSI name string fields. A newline character embedded in a device-supplied name string can inject arbitrary properties into the udev device database. This could allow an attacker who can present a crafted SCSI device to execute arbitrary commands as root when the device is disconnected. |
| A flaw was found in ansible-core. The ansible-galaxy role install command processes dependency specifications from a role's meta/requirements.yml file. Due to improper neutralization of argument delimiters, a malicious role author can inject arbitrary git configuration flags through the src field. This allows arbitrary code execution on the machine of a user who installs the role via ansible-galaxy role install. |
| WebDyne versions from 2.022 before 3.022 for Perl disclose application source to unauthenticated clients via the viewer in the default index page.
WebDyne's wrapper scripts, such as webdyne.psgi, enable the built-in index page by default. Its source viewer returns files under the document root named in the source parameter of an HTMX request, including .psp, .pm and .pl files.
A remote attacker can read the application's Perl code, including the __PERL__ blocks of .psp pages and any credentials they hold. |
| WebDyne versions from 2.031 before 3.022 for Perl execute files with .psp anywhere in the name as Perl pages.
WebDyne decides whether to run a requested file as a page by matching its name against WEBDYNE_PSP_EXT_RE, which has no end anchor.
An application that accepts uploads by checking only the final extension lets a remote attacker upload a file such as report.psp.pdf and run its embedded Perl by requesting it. |
| WebDyne versions from 2.014 before 3.022 for Perl reflect request parameters unescaped into form field values, allowing cross-site scripting.
The textfield, password_field and filefield tags fill their value attribute from the request parameter of the same name. WEBDYNE_CGI_AUTOESCAPE, which controls escaping of these values, defaults to off. From 2.022, WebDyne::HTML::Tiny also replaced its entity_encode method with one that returns its input unchanged, so enabling WEBDYNE_CGI_AUTOESCAPE has no effect.
A remote attacker can inject script into any page using these tags through a crafted link. |
| WebDyne versions from 3.007 before 3.022 for Perl execute .psp files outside the document root via path traversal in the PSGI API route fallback.
When a request matches no file, the PSGI handler retries it as an API route through api_filename. That keeps .. segments in the request path and only checks that the joined path starts with the document root, which a request for /../private passes.
A remote attacker can run the embedded Perl in any .psp file the server can read, such as one uploaded to a directory outside the document root. |
| WebDyne versions from 2.014 before 3.022 for Perl issue session cookies without the Secure, HttpOnly and SameSite attributes.
WebDyne::Session sets its session cookie with only a name, value and path.
Browsers then send the session ID over plain HTTP and with cross-site requests, and expose it to page scripts. A network attacker or an injected script can steal the session, and another site can make requests that carry it. |
| Dell OpenManage Enterprise, versions prior to 4.8.0, contains an Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Command execution. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: fix slab corruption from undersized DMA bounce buffers
Since commit faa8e404ad8e ("spi: imx: support dynamic burst length for
ECSPI DMA mode"), the driver allocates its private DMA TX/RX buffers
with kzalloc(dma_len), where dma_len is only rounded up to 4 bytes, but
maps, syncs and unmaps them with DMA_CACHE_ALIGNED_LEN(dma_len), i.e.
rounded up to the cache line size. As a result, the DMA API operates on
memory beyond the end of the allocation.
This was observed on a custom i.MX8MP platform with an mcp251xfd CAN
controller under heavy RPMSG load, as a series of refcount_t warnings
triggered from rpmsg_recv_done() in virtio_rpmsg_bus:
refcount_t: addition on 0; use-after-free.
refcount_t: underflow; use-after-free.
refcount_t: saturated; leaking memory.
Leading finally to an "Unable to handle kernel paging request" oops.
Reproducing this problem took between 30 minutes and roughly 30 hours
under the same workload.
Hardware watchpoints on the refcount of a struct rpmsg_endpoint showed
it was overwritten from 2 to 1 by __pi_memcpy_generic() in the
irq/155-spi2.0 thread. Additionally it was found that a "normal"
rpmsg_recv_done() took 11µs +/-2µs from its kref_get to kref_put. In
the error case the same sequence took about 215µs +/-10µs. Based on
this, an LLM was used to identify the size mismatch fixed here.
Allocate the buffers with DMA_CACHE_ALIGNED_LEN(dma_len) so they cover
the full mapped length, and use the same length for
dma_sync_single_for_cpu() to stay consistent with map and unmap.
With this patch applied, the same workload ran for more than 200 hours
without the problem reproducing. |
