| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ** UNSUPPORTED WHEN ASSIGNED ** Improper restriction of recursive entity references in DTDs ('XML entity expansion') vulnerability in Apache Cocoon.
This issue affects Apache Cocoon: all versions. XEE in the fp: form processor could lead to SSRF, including exposing files from the server to an untrusted external system
As this project is retired, we do not plan to release a version that fixes this issue. Users are recommended to find an alternative or restrict access to the instance to trusted users.
NOTE: This vulnerability only affects products that are no longer supported by the maintainer. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS
frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in
the generic FC transport. This is not a local userspace or IP network
path; the attacker must be able to inject fabric traffic, for example as
a compromised switch or fabric controller, or as a same-zone N_Port on a
fabric that permits source spoofing.
The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop
counter against the 32-bit on-wire pname_count field, and did not bound
pname_count by the descriptor body already validated by the TLV walker.
A pname_count of 256 therefore wraps the counter and keeps the loop
condition true indefinitely.
Factor the shared pname_list[] walk into one helper, widen the counter
to u32, and clamp pname_count against the entries that fit in the
descriptor body before iterating. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix stale pinned_link entry when fb-pin performs the final unpin
xe_bo_pin_external() and xe_bo_unpin_external() maintain the bo's
pinned_link list membership in xe->pinned.late.external, based on
whether the current call is the outermost pin or the final unpin.
However, the same external bo's pin_count can also be raised and
lowered directly by __xe_pin_fb_vma()/__xe_unpin_fb_vma(), which pin
the bo as a display scanout buffer without going through
xe_bo_pin_external()/xe_bo_unpin_external() at all, and have no
notion of, or ownership over, pinned_link.
If a bo is pinned both externally (e.g. dma-buf export) and as an fb,
and the external unpin happens first, xe_bo_unpin_external() correctly
observes pin_count > 1 and leaves the bo on pinned_link. When the fb
unpin later performs the true last unpin (pin_count 1 -> 0), it never
touches pinned_link, leaving the bo linked on xe->pinned.late.external
indefinitely. Once the bo is subsequently freed, this stale list entry
points into freed memory, corrupting the list and risking a
use-after-free the next time the list is walked or spliced.
The backup object pin/unpin sites in xe_bo_notifier_prepare_pinned()/
xe_bo_notifier_unprepare_pinned() have the same bypass characteristic,
though they never add their bo to a pinned list, so are not affected
by this particular list-corruption issue.
Move the pinned_link removal into xe_bo_account_unpin(), which already
runs on every unpin path (kernel, external, framebuffer, backup
object) right before the true 1 -> 0 pin_count transition. Since
list_del_init() only operates on the node itself, this removal is
list-agnostic and safe to perform regardless of which list (external
or kernel_bo_present) the bo happens to be linked on, or which code
path is performing the final unpin. Drop the now-redundant explicit
list_del_init() calls in xe_bo_unpin_external() and xe_bo_unpin().
v2:
- New patch
v3:
- Rebased on changes to previous patch.
(cherry picked from commit ca58d36a1f93af586ee93b340c9f9fd81312cc01) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate pitch coming from userspace
Validate the pitch, alongside the box dimensions before trying
to copy data from the underlying surface. Fixes possible
out of bounds reads with cursor snooping. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: serialise sco_conn lifetime against sco_recv_scodata()
sco_recv_scodata() upgrades the weak hcon->sco_data back-pointer to a
strong reference under hdev->lock:
hci_dev_lock(hdev);
hcon = hci_conn_hash_lookup_handle(hdev, handle);
...
conn = sco_conn_hold_unless_zero(hcon->sco_data);
hci_dev_unlock(hdev);
but the pointer is cleared from the other side without that lock. When
the last sco_conn reference is dropped, sco_conn_free() ran
conn->hcon->sco_data = NULL;
with no hdev->lock held, so the RX path could read hcon->sco_data and
call kref_get_unless_zero() on an sco_conn that was concurrently freed:
BUG: KASAN: slab-use-after-free in sco_conn_hold_unless_zero+0xbe/0x160
Write of size 4 by task kworker/u17:0
Workqueue: hci0 hci_rx_work
Call Trace:
sco_conn_hold_unless_zero+0xbe/0x160
sco_recv_scodata+0x13f/0x490
hci_rx_work+0x3af/0x730
kref_get_unless_zero() only guards against a zero refcount, not against
the backing memory already being freed.
Give hcon->sco_data an actual reference on the sco_conn it points to, so
the object cannot be freed while the pointer is still installed, and only
clear and drop it from sco_conn_del(), which runs under hdev->lock (its
callers, sco_connect_cfm() and sco_disconn_cfm(), hold it). The reader in
sco_recv_scodata() also takes hdev->lock, so the store and the read are
now serialised: the RX path either observes NULL or a reference that is
guaranteed to stay valid until it drops its own.
sco_conn_add() no longer hands its kref_init() reference to the caller as
the connection's only reference; that initial reference is the one owned
by hcon->sco_data, and callers get their own via sco_conn_hold().
Because the sco_conn can now outlive the socket (the association keeps it
alive until the link goes down), the hci_conn can no longer be dropped
from sco_conn_free() without regressing socket close: closing a connected
SCO socket must still tear the link down. Move hci_conn ownership to the
socket instead: __sco_chan_add() takes an hci_conn reference and it is
released from sco_chan_del() and sco_sock_destruct(), exactly once. The
sco_conn no longer owns an hci_conn reference, so sco_conn_add() stops
consuming one and sco_connect() drops the hci_connect_sco() reference on
every path; sco_connect_cfm() no longer needs its hci_conn_hold() dance. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Serialize concurrent connect calls
iso_sock_connect() checks the socket state before taking the socket lock
and drops the lock again before setting up a connection. Two callers can
both pass the admission check while the socket is open or bound.
Caller A can copy its destination for route selection, then caller B can
replace the socket destination before A binds or connects the CIS. A
then uses B's destination with the route selected for its own request.
B can also proceed after A attaches a connection and sets BT_CONNECT.
For deferred BIS setup, B can bind a second BIS and overwrite
iso_pi(sk)->conn, leaving the first connection's reference and conn->sk
back-pointer stranded. Concurrent CIS connects can likewise replace the
socket's connection. Later teardown only detaches the current connection,
so a callback on the old connection can race with socket release and
access a freed socket.
KASAN reported:
BUG: KASAN: slab-use-after-free in iso_sock_hold+0xf7/0x1b0
Call Trace:
iso_sock_hold+0xf7/0x1b0
iso_conn_del+0x7b/0x1d0
iso_connect_cfm+0x186/0x16a0
hci_conn_failed+0x154/0x280
hci_abort_conn_sync+0x3dc/0x7d0
hci_cmd_sync_work+0x173/0x300
Allocated by task 121:
sk_alloc+0x2b/0x6d0
bt_sock_alloc+0x29/0x370
iso_sock_alloc.constprop.0+0x19/0x300
iso_sock_create+0x94/0x100
Freed by task 121:
kfree+0x121/0x3c0
__sk_destruct+0x42b/0x540
iso_sock_release+0x29d/0x340
__sock_release+0xa1/0x260
Check admission under the socket lock and mark the connect operation in
progress before publishing its destination. Keep that flag set across
route lookup and connection setup, rejecting another connect with
-EBADFD before it can change the destination or attach a connection.
Clear the flag after either helper returns, including on failure, so a
failed setup can be retried.
A separate flag is needed because the socket lock must be released before
acquiring the HCI device lock, while BT_CONNECT requires an attached
connection. Keep the existing state transitions and the deferred CIS
completion through iso_sock_recvmsg().
Reject an existing socket attachment in __iso_chan_add() before taking
a new reference or publishing either pointer, so every caller preserves
the connection association. Keep the same-socket, same-connection success
case for deferred CIS setup. Reject an attached socket before BIS setup
so a reusable BIS is not claimed before the attachment is rejected.
In CIS setup, reject a different HCI connection before iso_conn_add()
and drop the per-attempt HCI hold directly. An unowned iso_conn may still
carry another reference after detachment, so its destruction cannot be
relied on to release that hold.
iso_listen_bis() creates a fresh PA HCI/ISO pair under the device lock,
so the temporary iso_conn_put() frees the ISO candidate and drops its
HCI hold on rejection. iso_conn_ready() uses a freshly allocated,
unpublished child with no connection, making the socket-side rejection
unreachable. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: Fix command skb lifetime during scan setup
During PA sync scan setup, hci_le_set_ext_scan_param_sync() gets the
address used for the PA_LINK lookup from hci_sent_cmd_data(). The
returned pointer borrows storage from sent_cmd or req_skb, without
holding a reference to either skb.
The scan worker runs on req_workqueue while hci_cmd_work() runs on the
separate device workqueue. After the scan worker loads sent_cmd, the
command worker can free and replace it before hci_sent_cmd_data()
dereferences the skb. The command payload can also be freed between
returning from the helper and comparing the address. The connection
lookup's RCU critical section does not protect the command skb.
KASAN reported:
BUG: KASAN: slab-use-after-free in hci_sent_cmd_data+0x27c/0x2f0
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
hci_sent_cmd_data+0x27c/0x2f0
hci_le_set_scan_param_sync+0x43a/0x850
hci_passive_scan_sync+0xb09/0x1460
hci_update_passive_scan_sync+0x47c/0x6e0
hci_le_pa_create_sync+0x200/0xa70
hci_cmd_sync_work+0x13c/0x290
Allocated by task 95:
skb_clone+0x13f/0x340
hci_cmd_work+0x2a9/0x7e0
Freed by task 95:
kmem_cache_free+0xba/0x3a0
hci_cmd_work+0x29c/0x7e0
Use hdev->lock to serialize the address snapshot with sent_cmd
replacement. Protect req_skb replacement and completion cleanup with
the same lock because the helper falls back to that skb. Copy the
address before releasing the lock and use the copy for the existing
RCU-protected connection lookup. Release the mutex before sending or
waiting for commands, preserving the lookup and completion ordering. |
| Unauthenticated Cross Site Scripting (XSS) in Easy Property Listings <= 3.5.25 versions. |
| Use after free in Windows Overlay Filter allows an authorized attacker to elevate privileges locally. |
| Time-of-check time-of-use (toctou) race condition in Windows Error Reporting allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows MIDI Service Module allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Installer allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Fix AMD TLBI Erratum #1718
The processor may fail to invalidate a TLB entry while executing an
INVLPGB/TLBSYNC instruction pair.
Detect the erratum and apply a software workaround when a microcode fix
is not present. |
| Heap-based buffer overflow in Windows Camera Frame Server Monitor allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in OpenSSH for Windows allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Windows Win32K allows an authorized attacker to elevate privileges locally. |
| SeaweedFS is a distributed storage system for files and blobs. From 4.0.388 until 4.41, the SFTP Helm chart embedded one unencrypted Ed25519 private host key in k8s/charts/seaweedfs/templates/sftp/sftp-secret.yaml as stringData.seaweedfs_sftp_ssh_private_key. A standalone deployment presented that public key when sftp.enabled and sftp.enableAuth were true, sftp.existingConfigSecret was not supplied, the legacy sftp.sshPrivateKey path remained selected, a valid config-ssh Secret allowed startup, and hostKeysFolder did not provide a later Ed25519 signer. An attacker able to redirect or intercept client traffic could impersonate that SFTP endpoint to clients that trusted the published host identity, exposing password credentials or data sent to the rogue endpoint. Default all-in-one and non-authenticated standalone paths did not load the key. This issue is fixed in version 4.41. |
| Out-of-bounds write in Windows NTFS allows an authorized attacker to execute code locally. |
| Improper link resolution before file access ('link following') in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locally. |
| The issue was addressed with additional app bundle integrity checks. This issue is fixed in macOS Golden Gate 27. A maliciously modified app may not be prevented from launching. |
