| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: break unbuffered write when netfs_alloc_subrequest() fails
syzbot reported a null-ptr-deref below [1] following a fault injection in
netfs_alloc_subrequest(). [0]
When netfs_alloc_subrequest() fails, subreq is NULL.
Later, netfs_prepare_write() tries to initialize members of
subreq(e.g., source), the issue in [1] is triggered.
Let's handle the error of netfs_prepare_write() properly.
[0]
FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 0
Call Trace:
netfs_alloc_subrequest+0x116/0x3f0
netfs_prepare_write+0x76/0x7b0
netfs_unbuffered_write+0x75c/0x2020
netfs_unbuffered_write_iter_locked+0x7d6/0xa80
netfs_unbuffered_write_iter+0x442/0x720
v9fs_file_write_iter+0xbf/0x100
vfs_write+0x6ac/0x1050
[1]
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:netfs_prepare_write+0xbc/0x7b0 fs/netfs/write_issue.c:173
Call Trace:
netfs_unbuffered_write+0x75c/0x2020 fs/netfs/direct_write.c:111
netfs_unbuffered_write_iter_locked+0x7d6/0xa80 fs/netfs/direct_write.c:290
netfs_unbuffered_write_iter+0x442/0x720 fs/netfs/direct_write.c:382
v9fs_file_write_iter+0xbf/0x100 fs/9p/vfs_file.c:409
new_sync_write fs/read_write.c:595 [inline] |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix subreq ref leak
Fix a subrequest ref leak in netfs_unbuffered_write() in the event that
subreq->io_iter ends up zero length during preparation. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix kmap_local leak in write_mft_record_nolock() error paths
write_mft_record_nolock() maps the MFT record folio with
kmap_local_folio(), but the pre_write_mst_fixup() and
bio_add_folio() failure paths jump to the error label without
unmapping it. kmap_local mappings are stack-ordered per task, so
leaking one corrupts the nesting for any outer mapping.
Unmap the folio on those error paths too. |
| In the Linux kernel, the following vulnerability has been resolved:
accel: ethosu: Don't read the U65 rounding mode as a storage mode
Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage
mode on U85 only. On U65 the same field holds the rounding mode, and the
command stream parser has read it as a storage mode since the driver was
added.
That went unnoticed while unknown values fell through the switch, but
now that they are rejected, every U65 command stream that asks for
natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits
it for average pooling, concatenation, split, unpack, strided slice, LUT
and argmax, which is 72 failures of the Teflon test suite on an i.MX93.
Truncating rounding (1) is misread as well: it picks the two-tile
address path and computes a bogus feature map size from tile bases the
command stream never set.
Read the field as a storage mode only on the hardware where it is one. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: put the chained BO when its mapping fails
amdxdna_cmd_set_error() looks up the first BO of a command chain, which
takes a reference, and drops it at the end of the function. The mapping of
that BO is established in between, and the failure path returns without the
put, so the reference is leaked.
Ordinary use does not reach it. The chain has been submitted before any of
this runs, so aie2_cmdlist_fill_slot() has already called
amdxdna_cmd_get_op() on that BO and amdxdna_gem_vmap() has cached its
address. What makes it reachable is that the BO is resolved again by
handle here, and the handle is userspace's to recycle: closing it after
submission and importing a dma-buf whose exporter implements no vmap onto
the same id leaves amdxdna_gem_get_obj() returning an object this cannot
map, since prime_import() types every import AMDXDNA_BO_SHARE. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: reject a command chain that carries no commands
A chain whose command_count is zero passes the payload length check,
because struct_size(payload, data, 0) is just the header. The fill loop
then does not run, so offset stays zero and the request is submitted with
a zero-length buffer.
On firmware without AIE2_NPU_COMMAND that ends at the opcode check, since
op is still ERT_INVALID_CMD and aie2_get_chain_msg_op() answers
MSG_OP_MAX_OPCODE. aie2_get_npu_chain_msg_op() answers
MSG_OP_CHAIN_EXEC_NPU whatever it is given, so there the submission
continues to drm_clflush_virt_range(cmd_buf, 0), which reads the byte
before the buffer and faults on the vmap guard page. EXEC_CMD is
reachable by any process that can open the render node.
Reject the request instead. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: don't schedule deferred kernel page table freeing while booting
Booting with a boot-time function tracer and a filter, for example
ftrace=function ftrace_filter=pud_free_pmd_page
panics on 7.3-rc4 as soon as the tracer starts:
[ 23.531178] Starting tracer 'function'
[ 23.675800] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN NOPTI
[ 23.819917] KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7]
[ 23.964025] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 7.3.0-rc4-fe2ec83746e5-with-fixes-v2+ #195 PREEMPT(undef)
[ 24.252248] RIP: 0010:__queue_work+0xab/0xf00
[ 25.981629] Call Trace:
[ 26.125727] <TASK>
[ 26.413912] ? pagetable_free_kernel+0x20/0x120
[ 26.990283] queue_work_on+0x97/0xf0
[ 27.134382] __cpa_collapse_large_pages+0x501/0x6f0
[ 27.566662] cpa_flush+0x394/0x620
[ 27.998953] change_page_attr_set_clr+0x321/0x4a0
[ 29.151729] set_memory_rox+0xa2/0xf0
[ 29.584018] create_trampoline+0x431/0x6f0
...
[ 44.343347] Kernel panic - not syncing: Attempted to kill the idle task!
The boot-time tracer is started from early_trace_init(), which runs
before workqueue_init_early(). Making its trampoline read-only splits a
large page, and CPA collapses it again right away. The split table has
been a kernel page table since commit 9e4a3ec3411b
("x86/mm/pat: Allocate split page tables as kernel page tables"), so the
collapse frees it through pagetable_free_kernel(), which queues work on
system_percpu_wq - still NULL at that point. That commit is correct in
itself; it only lets CPA reach pagetable_free_kernel() before the
workqueue that function relies on exists.
Keep putting the table on the list, but don't schedule the work while
the system is still booting. A core_initcall schedules it once to free
whatever was queued by then. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix buffer overflow in inline mode with large tag size
In inline mode, dm_integrity_check and dm_integrity_inline_recheck
compute the checksum of each block into an on-stack buffer of
HASH_MAX_DIGESTSIZE bytes. integrity_sector_checksum pads its result
with zeroes up to the tag size, so if the tag size is larger than
HASH_MAX_DIGESTSIZE, the padding runs past the end of the buffer. With
CONFIG_STACKPROTECTOR the kernel panics in dm_integrity_check on the
first read.
Enlarge both buffers to hold MAX_TAG_SIZE bytes, as commit b93b6643e9b5
("dm integrity: fix a crash with unusually large tag size") did for
integrity_metadata.
Note that this is not a security bug because the buffer overflow can only
be triggered by root. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Add missing bits in airoha_qdma_cleanup_tx_queue()
Similar to airoha_qdma_cleanup_rx_queue(), reset DMA TX descriptors in
airoha_qdma_cleanup_tx_queue routine. Moreover, reset TX_DMA_IDX to
TX_CPU_IDX to notify the NIC the QDMA TX ring is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mtk-snfi: unregister ECC engine on probe failure and remove() callback
mtk_snand_probe() registers the on-host NAND ECC engine, but teardown was
missing from both probe unwind and remove-time cleanup. Add a devm cleanup
action after successful registration so
nand_ecc_unregister_on_host_hw_engine() runs automatically on probe
failures and during device removal. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found
In mtk_pcie_setup_irq(), the IRQ domains are allocated before the
controller's IRQ is fetched. If the latter fails, the function
directly returns an error, without cleaning up the allocated domains.
Hence, reverse the order so that the IRQ domains are allocated after the
controller's IRQ is found.
This was flagged by Sashiko during a review of "[PATCH v6 0/7] PCI:
mediatek-gen3: add power control support". |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Propagate error from visit_tailcall_insn
Commit e40f5a6bf88a ("bpf: correct stack liveness for tail calls") added
visit_tailcall_insn() but did not check its return value. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop task_to_inode and inet_conn_established from lsm sleepable hooks
bpf_lsm_task_to_inode() is called under rcu_read_lock() and
bpf_lsm_inet_conn_established() is called from softirq context, so
neither hook can be used by sleepable LSM programs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Clear wcid pointer in mt7996_mac_sta_deinit_link()
Clear WCID pointer removing the sta link in mt7996_mac_sta_deinit_link
routine. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: close TOCTOU race while computing rcv_wnd
The MPTCP output path access locklessly the MPTCP-level ack_seq
in multiple times, using possibly different values for the data_ack
in the DSS option and to compute the announced rcv wnd for the same
packet.
Refactor the cote to avoid inconsistencies which may confuse the
peer. Also ensure that the MPTCP level rcv wnd is updated only when
the egress packet actually contains a DSS ack. |
| In the Linux kernel, the following vulnerability has been resolved:
net: garp: fix unsigned integer underflow in garp_pdu_parse_attr
The receive-side GARP attribute parser computes dlen with reversed
operands:
dlen = sizeof(*ga) - ga->len;
ga->len is the on-wire attribute length and includes the GARP attribute
header. For normal attributes with data, ga->len is larger than
sizeof(*ga), so the subtraction underflows in unsigned arithmetic.
The resulting value is later passed to garp_attr_lookup(), whose length
argument is u8. After truncation, the parsed data length usually no
longer matches the length stored for locally registered attributes, so
received Join/Leave events are ignored. This breaks the GARP receive path
for common attributes, such as GVRP VLAN registration attributes.
Compute the data length as the attribute length minus the header length. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: 6lowpan: only accept IPv6 packets in lowpan_xmit()
The aoe driver (or similar) generates a non-IPv6 packet
(e.g., ETH_P_AOE) and queues it for transmission via dev_queue_xmit()
on a 6LoWPAN interface (configured by the user or test case).
Since the packet is not IPv6, the 6LoWPAN header_ops->create function
(lowpan_header_create or header_create) returns early without initializing
the lowpan_addr_info structure in the skb headroom.
In the transmit function (lowpan_xmit), the driver calls lowpan_header
(or setup_header) which unconditionally copies and uses the lowpan_addr_info
from the headroom, which contains uninitialized data.
Fix this by dropping non IPv6 packets.
A similar fix is needed in net/bluetooth/6lowpan.c bt_xmit(). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: limit injected antenna index in ieee80211_parse_tx_radiotap
When parsing the radiotap header of an injected frame,
ieee80211_parse_tx_radiotap() uses the IEEE80211_RADIOTAP_ANTENNA value
directly as a shift count:
info->control.antennas |= BIT(*iterator.this_arg);
*iterator.this_arg is an 8-bit value taken straight from the frame
supplied by userspace, so BIT() can be asked to shift by up to 255. That
is undefined behaviour on the unsigned long and is reported by UBSAN:
UBSAN: shift-out-of-bounds in net/mac80211/tx.c:2174:30
shift exponent 235 is too large for 64-bit type 'unsigned long'
Call Trace:
ieee80211_parse_tx_radiotap+0xadb/0x1950 net/mac80211/tx.c:2174
ieee80211_monitor_start_xmit+0xb1f/0x1250 net/mac80211/tx.c:2451
...
packet_sendmsg+0x3eb6/0x50f0 net/packet/af_packet.c:3109
info->control.antennas is a 2-bit bitmap (u8 antennas:2), so only antenna
indices 0 and 1 can ever be represented. Ignore any larger value instead
of shifting out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: add hook transactions for device deletions
Restore the flag that indicates that the hook is going away, ie.
NFT_HOOK_REMOVE, but add a new transaction object to track deletion
of hooks without altering the basechain/flowtable hook_list during
the preparation phase.
The existing approach that moves the hook from the basechain/flowtable
hook_list to transaction hook_list breaks netlink dump path readers
of this RCU-protected list.
It should be possible use an array for nft_trans_hook to store the
deleted hooks to compact the representation but I am not expecting
many hook object, specially now that wildcard support for devices
is in place.
Note that the nft_trans_chain_hooks() list contains a list of struct
nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while
this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE.
Note that new commands can be updated to use nft_trans_hook for
consistency.
This patch also adapts the event notification path to deal with the list
of hook transactions. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
