| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: actually validate userq BOs
This was supposed to loop over the individual evicted list, as the
kernel and always_valid evicted lists were already handled in
amdgpu_vm_validate.
Without this, BOs that were created and evicted before a userq was made
would never end up in an eviction fence rearm.
Also add the missing ref to the BO before drm_exec locks and refs it.
(cherry picked from commit 18decfc9e8cc0fa70b6de9944cc27a37729edfbd) |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash in print_graph_function_event()
tracing_set_tracer() assigns the flags of the newly selected tracer
with:
tr->current_trace_flags = t->flags ? : t->tracer->flags;
If the new tracer defines neither static flags nor default flags, like
hwlat, irqsoff or wakeup, add_tracer() has no per instance flags copy
for it, and both operands are NULL, so tr->current_trace_flags ends up
being NULL as well.
The ring buffer is not cleared when switching tracers: it is reset
inside tracer_init(), after current_trace_flags was already assigned.
If the buffer still holds function_graph entries of the previous
tracer, printing one of them dereferences the NULL pointer. This was
hit by cat trace during an ftrace stress test:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
RIP: 0010:print_graph_function_event+0xe/0x20
Call Trace:
s_show+0x4d/0x110
seq_read_iter+0x2d4/0x490
seq_read+0x130/0x170
vfs_read+0xb5/0x370
ksys_read+0x6d/0xe0
do_syscall_64+0xbc/0x450
The snapshot buffer is not reset at all, so this can be reproduced
without a race:
echo function_graph > /sys/kernel/tracing/current_tracer
echo 1 > /sys/kernel/tracing/snapshot
echo hwlat > /sys/kernel/tracing/current_tracer
cat /sys/kernel/tracing/snapshot
Rather than teaching every user of tr->current_trace_flags about this
corner case, make sure it is never NULL: when the newly selected
tracer has no flags at all, tracing_set_tracer() falls back to a
static empty no_tracer_flags. run_tracer_selftest() can hit the same
case, so the same fallback is added there too. The existing users
already handle opts == NULL, so these tracers keep behaving as before. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix use-after-free of a destroyed user DSQ by a deferred reenqueue
A deferred reenqueue can read a freed user DSQ. The request stays on its
CPU's deferred list until run_deferred() takes it, and the RCU callback that
frees the DSQ assumes that the grace period has flushed it, so exit_dsq()
checks the per-CPU node without the deferred list lock. A grace period waits
for readers in flight, not for a pending run_deferred(). A run_deferred()
which starts after the grace period began can detach the request right
before the callback looks and then read the freed DSQ's id.
Cancel the pending requests before the grace period instead. The irq work
that frees the DSQ unlinks every CPU's request under the per-CPU deferred
list lock, and schedule_dsq_reenq() ignores a new request under the same
lock once the id is invalid. Only a run_deferred() that started before the
grace period can hold a request, and it runs with IRQs disabled, so the
grace period waits for it and nothing touches the DSQ after the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Don't transfer shrinker pages for pinned bos on purgeable state change
Pinned bos have their pages removed from the shrinker's shrinkable /
purgeable counts on pin, and added back on unpin according to the
bo's purgeable state at that time.
However, xe_bo_set_purgeable_shrinker() unconditionally transfers
pages between the shrinkable and purgeable counts. If the purgeable
state of a pinned bo changes, for example by userspace madvising
DONTNEED on a VMA of a bo that is also pinned as a scanout buffer,
this underflows one count and, after unpin, leaves the other one
permanently inflated.
Only update the purgeable flag for pinned bos, and leave the page
accounting to unpin.
(cherry picked from commit afe6bc012034123fd838328668e609bf57e46bd3) |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: take invalidate_lock in ntfs_setattr_size()
ntfs_setattr_size() updates i_size and resizes the on-disk attribute
without holding mapping->invalidate_lock. Page faults take the lock
shared, so a fault racing the resize can resolve a VCN against the
transient runlist state of ntfs_non_resident_attr_expand() and fail
with a spurious SIGBUS, and can interleave with the size-change
epilogue (truncate_pagecache(), i_size_write(),
pagecache_isize_extended()).
Take invalidate_lock exclusively around the whole resize after
inode_dio_wait(), matching the fallocate path and other filesystems
such as xfs, which wraps truncate in its mmaplock (= invalidate_lock). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Cope with the SS bit being set in #NPF exit codes
When running Hyper-V from Windows 11, KVM is seeing the SS bit set
in nested page fault error codes produced for shadowed NPT. The AMD
manual is unclear about when SS is set, including whether it can be set
when SupervisorShadowStackEn (bit 6) is not set in the MISC_CTL field
of the VMCB.
Nevertheless, the unexpected SS bit causes out of bounds accesses in
permission_fault(), seen as either WARNs or UBSAN reports:
kernel: UBSAN: array-index-out-of-bounds in arch/x86/kvm/mmu.h:225:27
kernel: index 34 is out of range for type 'u16 [16]'
(in this case, the page fault error code is 34*2=0x44, i.e. SS|U; the
report shows SS|U|W happening as well). Fix the handling of unknown
error codes by dropping SS and (with a WARN) any bits not among those
that permission_fault() expects to receive.
At the same time, given the uncertainty about when hardware sets SS,
follow the processor's behavior when constructing the fault's error
code, and preserve the SS bit as passed to FNAME(walk_addr_generic).
While the behavior is surprising, there's a possibility that Hyper-V
expects it (Hyper-V does not even enable CET unless it finds MBEC/GMET!),
so retain the information when reflecting the fault to L1 instead of
unconditionally discarding it.
Bisection shows that this started happening with commit 687ee95c1b6d ("KVM:
nSVM: enable GMET for guests"), even though SHSTK was available to guests
since Linux 6.18. However, this is not because bit 1 of MISC_CTL (GMET)
somehow enables reporting the SS bit; rather, it's simply that Hyper-V
never uses CET unless GMET is also present. The WARN is reproducible
even with gmet=0, with some hacking of kvm-unit-tests's cet.c testcase
to ensure that the first access to the shadow stack triggers a page fault. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate GUD_ROTATION_0 is present in supported rotations
The rotation argument to drm_plane_create_rotation_property() is set to
DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as
the supported_rotations argument. The driver never validates that
GUD_ROTATION_0 is present, so a device that omits it from its
GUD_PROPERTY_ROTATION triggers the
WARN_ON(rotation & ~supported_rotations) in
drm_plane_create_rotation_property()
Fix this by skipping the creation of rotation property if the device
doesn't have the GUD_ROTATION_0 bit |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: propagate reparse index insertion failure
update_reparse_data() ignores the return value of
set_reparse_index(). When index insertion fails, the code removes
the just-written reparse data as cleanup but still returns 0, so
symlink(2) (and WSL special file creation) reports success while
no reparse data exists on disk. When there was no previous reparse
data (oldsize == 0), the failure was likewise silently ignored.
Propagate the error to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/cirrus-qemu: Validate BAR0 size during probe
The `cirrus-qemu` driver relies on `CIRRUS_VRAM_SIZE` (4 MB) to validate
framebuffer sizes. However, during PCI probe, the driver mapped BAR0
without verifying that its size matches `CIRRUS_VRAM_SIZE`.
If a PCI device with a BAR0 smaller than 4 MB is bound to the driver, the
mapped VRAM will be smaller than expected. Because validation checks assume
4 MB VRAM, framebuffers larger than the mapped memory can be created.
When the display plane is updated (e.g. during release),
`cirrus_primary_plane_helper_atomic_update()` copies the framebuffer to
VRAM using `drm_fb_memcpy()`. Writing past the end of the mapped I/O memory
causes a supervisor write page fault:
BUG: unable to handle page fault for address: ffffc9000389c000
...
RIP: 0010:memcpy_toio+0x7c/0xe0 arch/x86/lib/iomem.c:110
...
Call Trace:
<TASK>
iosys_map_memcpy_to include/linux/iosys-map.h:285 [inline]
drm_fb_memcpy+0x325/0x5d0 drivers/gpu/drm/drm_format_helper.c:442
cirrus_primary_plane_helper_atomic_update+0x98a/0xb00
drivers/gpu/drm/tiny/cirrus-qemu.c:358
drm_atomic_helper_commit_planes+0x626/0xea0
drivers/gpu/drm/drm_atomic_helper.c:3038
drm_atomic_helper_commit_tail+0x60/0x510
drivers/gpu/drm/drm_atomic_helper.c:1989
commit_tail+0x2b1/0x3c0 drivers/gpu/drm/drm_atomic_helper.c:2074
drm_atomic_helper_commit+0xa77/0xb10
drivers/gpu/drm/drm_atomic_helper.c:2312
Fix this by validating in `cirrus_pci_probe()` that the PCI BAR0 resource
is not less than `CIRRUS_VRAM_SIZE`, returning `-ENODEV` if it is less. |
| In the Linux kernel, the following vulnerability has been resolved:
printk: Don't WARN on kthread_run failure.
Since __kthread_create_on_node() returns -EINTR upon SIGKILL,
we should not use WARN_ON() in order to catch kthread_run() failure. |
| In the Linux kernel, the following vulnerability has been resolved:
readdir: take no inode lock on an immutable directory
iterate_dir() takes the directory's i_rwsem shared and holds it across
->iterate_shared(). For a directory that never has an entry and is
never removed the lock keeps nothing still, it only orders every reader
and every writer of that inode behind each other.
For the directory of a nullfs instance that matters. The instance of
the initial mount namespace is the root of every empty mount namespace
and the private instance is the root of every kernel thread, so one
inode is shared across users who have nothing else in common. And a
reader can hold the lock for as long as it likes: back the getdents()
buffer with a mapping of a file on a FUSE mount of your own, let the
copy of "." and ".." fault and let the server wait. Queue an exclusive
taker behind it, a mkdir() in that directory goes through start_dirop()
before the read-only mount is reported, and from then on every lookup
that misses the dcache in that directory, every create and every mount
on it waits until the server answers. One user of an empty mount
namespace stalls all the others.
Add FOP_IMMUTABLE for the file operations of a directory that never
changes and is never removed and let iterate_dir() skip the lock for
it. The flag never changes for a file, ->f_pos is protected by
f_pos_lock since directories are FMODE_ATOMIC_POS, IS_DEADDIR can't be
set on such a directory and neither touch_atime() nor fsnotify take
i_rwsem. Set it on the nullfs directory. The placeholder directories of
libfs never have an entry either but their owners remove them, so they
keep the lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: serialize vblank counter reads against GPU reset
The vblank counter callback reads display registers and scanout
position without holding reset_domain->sem. During GPU recovery,
display commit work can call the callback while reset owns the
semaphore for writing. The hardware access then triggers the
lockdep_assert_held() in amdgpu_device_skip_hw_access() and sets
TAINT_WARN when lockdep is enabled.
Try to acquire the reset semaphore for reading before accessing the
hardware, and hold it across the counter and scanout-position reads.
If reset is already in progress, return DRM's cached software vblank
count instead. This avoids blocking behind reset and avoids accessing
display hardware while it is being reset.
The cached count is less accurate than the hardware count, but is
used only when reset prevents a safe hardware read. This addresses
the reset-time warning from this vblank path; it does not suppress or
fix unrelated lockdep warnings.
(cherry picked from commit 51a4359f7431a4be5e42803c8bdaf7e0e5be2934) |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: patch: fix handling of bpf-jit execmem addresses
Commit 8718e5a3090b ("riscv: patch: skip fixmap mapping when kernel text
is already writable") gated the core_kernel_text() branch of patch_map()
on CONFIG_STRICT_KERNEL_RWX, and explicitly left the vmalloc branch
unchanged. That branch has a separate problem.
That branch only creates a temporary writable fixmap alias when
CONFIG_STRICT_MODULE_RWX is enabled, and otherwise assumes the target is
directly writable and returns the address unchanged. That assumption no
longer holds: bpf_prog_pack_alloc calls set_memory_rox() on every pack
unconditionally in alloc_new_pack(), independently of any
CONFIG_STRICT_*_RWX option, so BPF text in the vmalloc area is read-only
regardless of what CONFIG_STRICT_MODULE_RWX says.
With CONFIG_STRICT_MODULE_RWX=n, patch_map() returns the read-only
address directly, the subsequent copy_to_kernel_nofault() takes a
page fault and returns -EFAULT. bpf_arch_text_copy() turns that into
-EINVAL, which propagates through bpf_jit_binary_pack_finalize() to the
WARN_ON() in bpf_int_jit_compile() and leaves the program un-JITed.
Note that BPF cannot be fixed the way kprobes was in
commit bdc46e507b59 ("riscv: mm: make EXECMEM_KPROBES writable without
CONFIG_STRICT_MODULE_RWX"). EXECMEM_BPF is already PAGE_KERNEL, i.e.
writable at allocation time; the read-only mapping is established
afterwards by generic code in alloc_new_pack(), which arch code cannot
influence. The only place this can be handled is patch_map().
This is the same problem that was fixed on arm64 by commit b1480ed230ac
("arm64: patching: fix handling of execmem addresses"), and the fix is
the same: CONFIG_EXECMEM is what actually tracks whether the vmalloc
area can hold executable memory that needs a temporary alias to be
written. CONFIG_BPF_JIT, CONFIG_KPROBES and CONFIG_MODULES all select
it.
Note that this is not limited to CONFIG_MODULES=n. Unlike arm64, riscv
selects CONFIG_ARCH_OPTIONAL_KERNEL_RWX, so CONFIG_STRICT_MODULE_RWX can
be disabled with CONFIG_MODULES=y as well, and the bug is reachable in
that configuration too.
The !CONFIG_MMU build is unaffected: it has its own __patch_insn_set()
and __patch_insn_write() implementations and never calls patch_map(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: microchip: sparx5: clean up PSFP resources on flower setup failure
sparx5_tc_flower_psfp_setup() allocates PSFP stream gate, flow meter and
stream filter resources before adding VCAP actions. If a later step
fails, the resources allocated earlier in the function are not unwound.
Add error paths to release the stream filter, flow meter and stream gate
when setup fails after they have been acquired.
Also make sparx5_psfp_fm_add() return the acquired flow-meter id before
the existing-flow-meter early return. When an existing flow meter is
reused, sparx5_psfp_fm_get() increments its pool reference count, but the
caller previously kept psfp_fmid as 0. If a later setup step failed, the
error path could try to delete flow-meter id 0 instead of the reused flow
meter, leaving the incremented reference behind. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: validate the superblock on resume
dm_integrity_resume() re-reads the superblock from the device so that it
picks up the flags and the recalculate position. It performs no
validation on the result, while the constructor validates the superblock
it reads and sizes all the in-memory structures according to it. The user
may modify the superblock on the underlying device while the dm-integrity
device is suspended, so that the two no longer agree.
In particular, access_journal_data() shifts the journal entry index by
ic->sb->log2_sectors_per_block, while ic->journal_section_sectors and the
journal page list were computed with the value that was present at
constructor time. Increasing log2_sectors_per_block makes the index run
past the end of the journal, and dm-integrity then writes 512 bytes
through lowmem_page_address(NULL).
Snapshot the validated superblock in the constructor and refuse to resume
if any of the fields that describe the on-disk geometry changed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Properly acquire queue buffers in CRIU restore
When kfd_queue_acquire_buffers() was split off from
set_queue_properties_from_user(), set_queue_properties_from_criu()
was missed. Thus, set_queue_properties_from_criu() is not
filling out the buffer fields of queue_properties, which
can come up when subsequent code expects them to be non-null.
Add the proper call to kfd_queue_acquire_buffers(), and also
use the right cast types in set_queue_properties_from_criu()
(which were missed at the same time)
(cherry picked from commit 88ed96abbbe27b70193544fbc1ee06448c274714) |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: protect sb_write_pointer() with invalidate lock
sb_write_pointer() reads the super block from the block device page cache
using read_cache_page_gfp(). This has the same race with BLKBSZSET as the
one fixed by commit 3f29d661e568 ("btrfs: sync read disk super and set
block size").
Take the mapping invalidate lock around read_cache_page_gfp() to
serialize the read against block size changes. |
| In the Linux kernel, the following vulnerability has been resolved:
net: cpsw_new: unregister devlink on port registration failure
cpsw_probe() registers devlink before registering the CPSW ports.
If cpsw_register_ports() fails, the error path only unregisters the
notifiers and then releases the lower level resources. It does not undo
the successful cpsw_register_devlink() call, leaving the devlink instance
and its parameters registered after probe has failed.
Add a devlink cleanup label for the path where devlink registration has
already succeeded, and use it when port registration fails. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Unwind debug trap enable on copy_to_user failure
If kfd_dbg_trap_enable() fails while copying runtime_info to userspace,
it had already activated the trap, set debug_trap_enabled, taken an extra
process reference, and opened the debug event file. Return -EFAULT without
unwinding that state, leaving inconsistent trap state and a refcount
imbalance that could break later DISABLE/ENABLE.
On copy_to_user failure, deactivate the trap and undo the rest of the
enable setup before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7603: initialize global station WCID
mt7603 uses a driver-private global station WCID for frames that have
neither a station nor a vif, including frames injected through a monitor
interface. Unlike the core global WCID initialized by
mt76_register_device(), this WCID is published without ever being passed
to mt76_wcid_init().
Since commit 0335c034e726 ("wifi: mt76: fix race condition related to
checking tx queue fill status"), mt76_tx() queues every such frame on the
WCID's tx_pending or tx_offchannel queue and links its tx_list. The first
injected frame therefore reaches __skb_queue_tail() with an uninitialized
sk_buff_head and dereferences a NULL prev pointer.
Initialize the WCID before publishing it.
The fix was tested on an MT7603 PCIe device. Three wildcard probe requests
were injected through a monitor interface. The hardware queue head and tail
advanced from 0 to 3 and a second radio captured the third request over the
air. No oops or reset occurred. After restoring AP mode, a 150 MB transfer
also completed without a reset. |
