| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
IB/mthca: Add missed mthca_unmap_user_db() for mthca_create_srq()
Fix a user triggerable leak on the system call failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
atm: lec: fix null-ptr-deref in lec_arp_clear_vccs
syzkaller reported a null-ptr-deref in lec_arp_clear_vccs().
This issue can be easily reproduced using the syzkaller reproducer.
In the ATM LANE (LAN Emulation) module, the same atm_vcc can be shared by
multiple lec_arp_table entries (e.g., via entry->vcc or entry->recv_vcc).
When the underlying VCC is closed, lec_vcc_close() iterates over all
ARP entries and calls lec_arp_clear_vccs() for each matched entry.
For example, when lec_vcc_close() iterates through the hlists in
priv->lec_arp_empty_ones or other ARP tables:
1. In the first iteration, for the first matched ARP entry sharing the VCC,
lec_arp_clear_vccs() frees the associated vpriv (which is vcc->user_back)
and sets vcc->user_back to NULL.
2. In the second iteration, for the next matched ARP entry sharing the same
VCC, lec_arp_clear_vccs() is called again. It obtains a NULL vpriv from
vcc->user_back (via LEC_VCC_PRIV(vcc)) and then attempts to dereference it
via `vcc->pop = vpriv->old_pop`, leading to a null-ptr-deref crash.
Fix this by adding a null check for vpriv before dereferencing
it. If vpriv is already NULL, it means the VCC has been cleared
by a previous call, so we can safely skip the cleanup and just
clear the entry's vcc/recv_vcc pointers.
The entire cleanup block (including vcc_release_async()) is placed inside
the vpriv guard because a NULL vpriv indicates the VCC has already been
fully released by a prior iteration — repeating the teardown would
redundantly set flags and trigger callbacks on an already-closing socket.
The Fixes tag points to the initial commit because the entry->vcc path has
been vulnerable since the original code. The entry->recv_vcc path was later
added by commit 8d9f73c0ad2f ("atm: fix a memory leak of vcc->user_back")
with the same pattern, and both paths are fixed here. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix oops due to uninitialised var in smb2_unlink()
If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the
iovs set @rqst will be left uninitialised, hence calling
SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will
oops.
Fix this by initialising @close_iov and @open_iov before setting them
in @rqst. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: teql: fix NULL pointer dereference in iptunnel_xmit on TEQL slave xmit
teql_master_xmit() calls netdev_start_xmit(skb, slave) to transmit
through slave devices, but does not update skb->dev to the slave device
beforehand.
When a gretap tunnel is a TEQL slave, the transmit path reaches
iptunnel_xmit() which saves dev = skb->dev (still pointing to teql0
master) and later calls iptunnel_xmit_stats(dev, pkt_len). This
function does:
get_cpu_ptr(dev->tstats)
Since teql_master_setup() does not set dev->pcpu_stat_type to
NETDEV_PCPU_STAT_TSTATS, the core network stack never allocates tstats
for teql0, so dev->tstats is NULL. get_cpu_ptr(NULL) computes
NULL + __per_cpu_offset[cpu], resulting in a page fault.
BUG: unable to handle page fault for address: ffff8880e6659018
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 68bc067 P4D 68bc067 PUD 0
Oops: Oops: 0002 [#1] SMP KASAN PTI
RIP: 0010:iptunnel_xmit (./include/net/ip_tunnels.h:664 net/ipv4/ip_tunnel_core.c:89)
Call Trace:
<TASK>
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
__gre_xmit (net/ipv4/ip_gre.c:478)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
teql_master_xmit (net/sched/sch_teql.c:319)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
neigh_direct_output (net/core/neighbour.c:1660)
ip_finish_output2 (net/ipv4/ip_output.c:237)
__ip_finish_output.part.0 (net/ipv4/ip_output.c:315)
ip_mc_output (net/ipv4/ip_output.c:369)
ip_send_skb (net/ipv4/ip_output.c:1508)
udp_send_skb (net/ipv4/udp.c:1195)
udp_sendmsg (net/ipv4/udp.c:1485)
inet_sendmsg (net/ipv4/af_inet.c:859)
__sys_sendto (net/socket.c:2206)
Fix this by setting skb->dev = slave before calling
netdev_start_xmit(), so that tunnel xmit functions see the correct
slave device with properly allocated tstats. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add xmit recursion limit to tunnel xmit functions
Tunnel xmit functions (iptunnel_xmit, ip6tunnel_xmit) lack their own
recursion limit. When a bond device in broadcast mode has GRE tap
interfaces as slaves, and those GRE tunnels route back through the
bond, multicast/broadcast traffic triggers infinite recursion between
bond_xmit_broadcast() and ip_tunnel_xmit()/ip6_tnl_xmit(), causing
kernel stack overflow.
The existing XMIT_RECURSION_LIMIT (8) in the no-qdisc path is not
sufficient because tunnel recursion involves route lookups and full IP
output, consuming much more stack per level. Use a lower limit of 4
(IP_TUNNEL_RECURSION_LIMIT) to prevent overflow.
Add recursion detection using dev_xmit_recursion helpers directly in
iptunnel_xmit() and ip6tunnel_xmit() to cover all IPv4/IPv6 tunnel
paths including UDP encapsulated tunnels (VXLAN, Geneve, etc.).
Move dev_xmit_recursion helpers from net/core/dev.h to public header
include/linux/netdevice.h so they can be used by tunnel code.
BUG: KASAN: stack-out-of-bounds in blake2s.constprop.0+0xe7/0x160
Write of size 32 at addr ffff88810033fed0 by task kworker/0:1/11
Workqueue: mld mld_ifc_work
Call Trace:
<TASK>
__build_flow_key.constprop.0 (net/ipv4/route.c:515)
ip_rt_update_pmtu (net/ipv4/route.c:1073)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:84)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
ip_finish_output2 (net/ipv4/ip_output.c:237)
ip_output (net/ipv4/ip_output.c:438)
iptunnel_xmit (net/ipv4/ip_tunnel_core.c:86)
ip_tunnel_xmit (net/ipv4/ip_tunnel.c:847)
gre_tap_xmit (net/ipv4/ip_gre.c:779)
dev_hard_start_xmit (net/core/dev.c:3887)
sch_direct_xmit (net/sched/sch_generic.c:347)
__dev_queue_xmit (net/core/dev.c:4802)
bond_dev_queue_xmit (drivers/net/bonding/bond_main.c:312)
bond_xmit_broadcast (drivers/net/bonding/bond_main.c:5279)
bond_start_xmit (drivers/net/bonding/bond_main.c:5530)
dev_hard_start_xmit (net/core/dev.c:3887)
__dev_queue_xmit (net/core/dev.c:4841)
mld_sendpack
mld_ifc_work
process_one_work
worker_thread
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "drm/amd: Check if ASPM is enabled from PCIe subsystem"
This reverts commit 7294863a6f01248d72b61d38478978d638641bee.
This commit was erroneously applied again after commit 0ab5d711ec74
("drm/amd: Refactor `amdgpu_aspm` to be evaluated per device")
removed it, leading to very hard to debug crashes, when used with a system with two
AMD GPUs of which only one supports ASPM.
(cherry picked from commit 97a9689300eb2b393ba5efc17c8e5db835917080) |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Fix stats report corruption on queue count change
The driver and the NIC share a region in memory for stats reporting.
The NIC calculates its offset into this region based on the total size
of the stats region and the size of the NIC's stats.
When the number of queues is changed, the driver's stats region is
resized. If the queue count is increased, the NIC can write past
the end of the allocated stats region, causing memory corruption.
If the queue count is decreased, there is a gap between the driver
and NIC stats, leading to incorrect stats reporting.
This change fixes the issue by allocating stats region with maximum
size, and the offset calculation for NIC stats is changed to match
with the calculation of the NIC. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: release admin tagset if init fails
nvme_fabrics creates an NVMe/FC controller in following path:
nvmf_dev_write()
-> nvmf_create_ctrl()
-> nvme_fc_create_ctrl()
-> nvme_fc_init_ctrl()
nvme_fc_init_ctrl() allocates the admin blk-mq resources right after
nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing
the controller state, scheduling connect work, etc.), we jump to the
fail_ctrl path, which tears down the controller references but never
frees the admin queue/tag set. The leaked blk-mq allocations match the
kmemleak report seen during blktests nvme/fc.
Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call
nvme_remove_admin_tag_set() when it is set so that all admin queue
allocations are reclaimed whenever controller setup aborts. |
| In the Linux kernel, the following vulnerability has been resolved:
regmap: maple: free entry on mas_store_gfp() failure
regcache_maple_write() allocates a new block ('entry') to merge
adjacent ranges and then stores it with mas_store_gfp().
When mas_store_gfp() fails, the new 'entry' remains allocated and
is never freed, leaking memory.
Free 'entry' on the failure path; on success continue freeing the
replaced neighbor blocks ('lower', 'upper'). |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: free potentially allocated iovec on cache put failure
If a read/write request goes through io_req_rw_cleanup() and has an
allocated iovec attached and fails to put to the rw_cache, then it may
end up with an unaccounted iovec pointer. Have io_rw_recycle() return
whether it recycled the request or not, and use that to gauge whether to
free a potential iovec or not. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: Initialize netdev pointer before queue setup
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: Fix off-by-one error in PF setup_nic_devices() cleanup
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Also, decrement i in the devlink_alloc failure path to point to the
last successfully allocated index.
Compile tested only. Issue found using code review. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: Fix off-by-one error in VF setup_nic_devices() cleanup
In setup_nic_devices(), the initialization loop jumps to the label
setup_nic_dev_free on failure. The current cleanup loop while(i--)
skip the failing index i, causing a memory leak.
Fix this by changing the loop to iterate from the current index i
down to 0.
Compile tested only. Issue found using code review. |
| In the Linux kernel, the following vulnerability has been resolved:
net: add proper RCU protection to /proc/net/ptype
Yin Fengwei reported an RCU stall in ptype_seq_show() and provided
a patch.
Real issue is that ptype_seq_next() and ptype_seq_show() violate
RCU rules.
ptype_seq_show() runs under rcu_read_lock(), and reads pt->dev
to get device name without any barrier.
At the same time, concurrent writers can remove a packet_type structure
(which is correctly freed after an RCU grace period) and clear pt->dev
without an RCU grace period.
Define ptype_iter_state to carry a dev pointer along seq_net_private:
struct ptype_iter_state {
struct seq_net_private p;
struct net_device *dev; // added in this patch
};
We need to record the device pointer in ptype_get_idx() and
ptype_seq_next() so that ptype_seq_show() is safe against
concurrent pt->dev changes.
We also need to add full RCU protection in ptype_seq_next().
(Missing READ_ONCE() when reading list.next values)
Many thanks to Dong Chenchen for providing a repro. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: get rid of the xchk_xfile_*_descr calls
The xchk_xfile_*_descr macros call kasprintf, which can fail to allocate
memory if the formatted string is larger than 16 bytes (or whatever the
nofail guarantees are nowadays). Some of them could easily exceed that,
and Jiaming Zhang found a few places where that can happen with syzbot.
The descriptions are debugging aids and aren't required to be unique, so
let's just pass in static strings and eliminate this path to failure.
Note this patch touches a number of commits, most of which were merged
between 6.6 and 6.14. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: only call xf{array,blob}_destroy if we have a valid pointer
Only call the xfarray and xfblob destructor if we have a valid pointer,
and be sure to null out that pointer afterwards. Note that this patch
fixes a large number of commits, most of which were merged between 6.9
and 6.10. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: check return value of xchk_scrub_create_subord
Fix this function to return NULL instead of a mangled ENOMEM, then fix
the callers to actually check for a null pointer and return ENOMEM.
Most of the corrections here are for code merged between 6.2 and 6.10. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: check for deleted cursors when revalidating two btrees
The free space and inode btree repair functions will rebuild both btrees
at the same time, after which it needs to evaluate both btrees to
confirm that the corruptions are gone.
However, Jiaming Zhang ran syzbot and produced a crash in the second
xchk_allocbt call. His root-cause analysis is as follows (with minor
corrections):
In xrep_revalidate_allocbt(), xchk_allocbt() is called twice (first
for BNOBT, second for CNTBT). The cause of this issue is that the
first call nullified the cursor required by the second call.
Let's first enter xrep_revalidate_allocbt() via following call chain:
xfs_file_ioctl() ->
xfs_ioc_scrubv_metadata() ->
xfs_scrub_metadata() ->
`sc->ops->repair_eval(sc)` ->
xrep_revalidate_allocbt()
xchk_allocbt() is called twice in this function. In the first call:
/* Note that sc->sm->sm_type is XFS_SCRUB_TYPE_BNOPT now */
xchk_allocbt() ->
xchk_btree() ->
`bs->scrub_rec(bs, recp)` ->
xchk_allocbt_rec() ->
xchk_allocbt_xref() ->
xchk_allocbt_xref_other()
since sm_type is XFS_SCRUB_TYPE_BNOBT, pur is set to &sc->sa.cnt_cur.
Kernel called xfs_alloc_get_rec() and returned -EFSCORRUPTED. Call
chain:
xfs_alloc_get_rec() ->
xfs_btree_get_rec() ->
xfs_btree_check_block() ->
(XFS_IS_CORRUPT || XFS_TEST_ERROR), the former is false and the latter
is true, return -EFSCORRUPTED. This should be caused by
ioctl$XFS_IOC_ERROR_INJECTION I guess.
Back to xchk_allocbt_xref_other(), after receiving -EFSCORRUPTED from
xfs_alloc_get_rec(), kernel called xchk_should_check_xref(). In this
function, *curpp (points to sc->sa.cnt_cur) is nullified.
Back to xrep_revalidate_allocbt(), since sc->sa.cnt_cur has been
nullified, it then triggered null-ptr-deref via xchk_allocbt() (second
call) -> xchk_btree().
So. The bnobt revalidation failed on a cross-reference attempt, so we
deleted the cntbt cursor, and then crashed when we tried to revalidate
the cntbt. Therefore, check for a null cntbt cursor before that
revalidation, and mark the repair incomplete. Also we can ignore the
second tree entirely if the first tree was rebuilt but is already
corrupt.
Apply the same fix to xrep_revalidate_iallocbt because it has the same
problem. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: secure_seq: add back ports to TS offset
This reverts 28ee1b746f49 ("secure_seq: downgrade to per-host timestamp offsets")
tcp_tw_recycle went away in 2017.
Zhouyan Deng reported off-path TCP source port leakage via
SYN cookie side-channel that can be fixed in multiple ways.
One of them is to bring back TCP ports in TS offset randomization.
As a bonus, we perform a single siphash() computation
to provide both an ISN and a TS offset. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix memory allocation in nvme_pr_read_keys()
nvme_pr_read_keys() takes num_keys from userspace and uses it to
calculate the allocation size for rse via struct_size(). The upper
limit is PR_KEYS_MAX (64K).
A malicious or buggy userspace can pass a large num_keys value that
results in a 4MB allocation attempt at most, causing a warning in
the page allocator when the order exceeds MAX_PAGE_ORDER.
To fix this, use kvzalloc() instead of kzalloc().
This bug has the same reasoning and fix with the patch below:
https://lore.kernel.org/linux-block/20251212013510.3576091-1-kartikey406@gmail.com/
Warning log:
WARNING: mm/page_alloc.c:5216 at __alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216, CPU#1: syz-executor117/272
Modules linked in:
CPU: 1 UID: 0 PID: 272 Comm: syz-executor117 Not tainted 6.19.0 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:__alloc_frozen_pages_noprof+0x5aa/0x2300 mm/page_alloc.c:5216
Code: ff 83 bd a8 fe ff ff 0a 0f 86 69 fb ff ff 0f b6 1d f9 f9 c4 04 80 fb 01 0f 87 3b 76 30 ff 83 e3 01 75 09 c6 05 e4 f9 c4 04 01 <0f> 0b 48 c7 85 70 fe ff ff 00 00 00 00 e9 8f fd ff ff 31 c0 e9 0d
RSP: 0018:ffffc90000fcf450 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1ffff920001f9ea0
RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000040dc0
RBP: ffffc90000fcf648 R08: ffff88800b6c3380 R09: 0000000000000001
R10: ffffc90000fcf840 R11: ffff88807ffad280 R12: 0000000000000000
R13: 0000000000040dc0 R14: 0000000000000001 R15: ffffc90000fcf620
FS: 0000555565db33c0(0000) GS:ffff8880be26c000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000002000000c CR3: 0000000003b72000 CR4: 00000000000006f0
Call Trace:
<TASK>
alloc_pages_mpol+0x236/0x4d0 mm/mempolicy.c:2486
alloc_frozen_pages_noprof+0x149/0x180 mm/mempolicy.c:2557
___kmalloc_large_node+0x10c/0x140 mm/slub.c:5598
__kmalloc_large_node_noprof+0x25/0xc0 mm/slub.c:5629
__do_kmalloc_node mm/slub.c:5645 [inline]
__kmalloc_noprof+0x483/0x6f0 mm/slub.c:5669
kmalloc_noprof include/linux/slab.h:961 [inline]
kzalloc_noprof include/linux/slab.h:1094 [inline]
nvme_pr_read_keys+0x8f/0x4c0 drivers/nvme/host/pr.c:245
blkdev_pr_read_keys block/ioctl.c:456 [inline]
blkdev_common_ioctl+0x1b71/0x29b0 block/ioctl.c:730
blkdev_ioctl+0x299/0x700 block/ioctl.c:786
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x1bf/0x220 fs/ioctl.c:583
x64_sys_call+0x1280/0x21b0 mnt/fuzznvme_1/fuzznvme/linux-build/v6.19/./arch/x86/include/generated/asm/syscalls_64.h:17
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x71/0x330 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fb893d3108d
Code: 28 c3 e8 46 1e 00 00 66 0f 1f 44 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffff61f2f38 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ffff61f3138 RCX: 00007fb893d3108d
RDX: 0000000020000040 RSI: 00000000c01070ce RDI: 0000000000000003
RBP: 0000000000000001 R08: 0000000000000000 R09: 00007ffff61f3138
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007ffff61f3128 R14: 00007fb893dae530 R15: 0000000000000001
</TASK> |
