| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Do not clear VM-wide SVE feature on vCPU init failure
pkvm_vcpu_init_sve() clears KVM_ARM_VCPU_SVE in kvm->arch.vcpu_features
when it fails, but vcpu_has_sve() tests KVM_ARCH_FLAG_GUEST_HAS_SVE,
which is left set. Later vCPUs on that VM then skip the SVE setup and
register with a NULL sve_state, which the guest's first FP access hands
to sve_load_state().
Return the error without touching vcpu_features. |
| In the Linux kernel, the following vulnerability has been resolved:
eth: fbnic: reset num_napi when the napi vectors are freed
fbn->num_napi is the count of live napi vectors, each of which owns an
IRQ. The PM path had freed them without clearing the count.
fbnic_pm_suspend() tears the datapath down via ndo_stop() and frees the
IRQs, but leaves netif_running() true so resume knows to re-open. Resume
rebuilds the datapath in __fbnic_pm_resume() and fbnic_reset_queues() sets
num_napi and __fbnic_open() re-allocates the vectors.
When the datapath is torn down but never rebuilt, num_napi is left
pointing at freed vectors under 2 different scenarios:
- a PCIe error recovery that fails (fbnic_err_slot_reset() ->
__fbnic_pm_resume() returns an error -> PCI_ERS_RESULT_DISCONNECT), so
.resume never runs; or
- an __fbnic_open() that fails partway on resume and unwinds, freeing
the vectors after fbnic_reset_queues() has already set num_napi.
The netdev is then running with num_napi > 0 but napi[] freed, and the
eventual remove/unbind close re-enters fbnic_down() -> fbnic_dbg_down()
and dereferences the freed vectors:
BUG: kernel NULL pointer dereference, address: 0000000000000210
RIP: fbnic_dbg_down+0x28
Clear num_napi when the vectors are freed: in the suspend teardown (a
good resume re-establishes it before __fbnic_open()) and on the resume
open failure. A redundant ndo_stop() then walks an empty napi[]. The
normal ndo_stop() down/up cycle is untouched and keeps num_napi for the
next ndo_open(). |
| A NULL Pointer Dereference vulnerability in the routing protocol daemon (RPD) of Juniper Networks Junos OS and Junos OS Evolved allows a configured peer sending a BGP UPDATE to cause a denial of service when an import policy with `then source-based-forwarding next-hop next-table <X>` is configured to reference a routing table that does not exist. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: pac1934: check ACPI label duplication
A label duplication failure currently reaches the terminating-byte
write. Release the ACPI result and abort before accessing the missing
label; earlier labels are managed by devres.
Detected by static analysis and reviewed with AI-assisted source auditing. |
| A flaw was found in GIMP. Importing a crafted SBZ palette without a color-model attribute can cause a NULL pointer dereference during string comparison, resulting in denial of service of the GIMP application. |
| Multiple Cisco products are affected by a vulnerability in the generic routing encapsulation (GRE) tunnel decapsulation feature of the Snort 3 Detection Engine that could allow an unauthenticated, remote attacker to cause an unexpected restart of the Snort 3 Detection Engine.
This vulnerability is due to improper handling of nested GRE traffic. An attacker could exploit this vulnerability by sending a crafted GRE payload through an affected device. A successful exploit could allow the attacker to trigger an unexpected reload of the Snort 3 Detection Engine, resulting in either a bypass or denial of service (DoS) condition, depending on device configuration. For more information, see the section of this advisory. The Snort 3 Detection Engine will restart automatically. No manual intervention is required. |
| Photoshop Desktop is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: msc313e: Fix NULL pointer dereference in PM callbacks
msc313e_wdt_probe() doesn't set the driver data for the platform device.
As a result, dev_get_drvdata() in msc313e_wdt_suspend() and
msc313e_wdt_resume() will return NULL, leading to a NULL pointer
dereference afterward.
Set the platform device driver data in msc313e_wdt_probe(). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: mpi3mr: Fix NULL pointer dereference in mpi3mr_sas_port_add()
sas_port_alloc_num() can return NULL on memory allocation failure. The
return value is passed directly to sas_port_add() without a NULL check,
which causes a NULL pointer dereference.
Additionally, if sas_port_add() fails, the allocated port is not freed
before jumping to out_fail, leaking the sas_port structure. Call
sas_port_free() to properly release it. |
| Uncontrolled resource consumption in the HTTP/2 (h2) receive path of Apache bRPC (version < 1.18.0) on all platforms allows a remote unauthenticated attacker to crash the server or grow its memory without bound by sending crafted HTTP/2 frames.
Root Cause:
The h2 parser, enabled by default on every bRPC server port and used by h2/gRPC clients, trusts the peer to respect receive-side limits that bRPC advertises but never enforces:
1. SETTINGS_MAX_CONCURRENT_STREAMS defaulted to unlimited and was never checked on the server, letting a peer pin an unbounded number of pending streams per connection (~100x memory amplification).
2. SETTINGS_MAX_HEADER_LIST_SIZE defaulted to unlimited and was never enforced; 1-byte HPACK indexed references amplify a small HEADERS frame ~4000x into an unbounded decoded header list ("HPACK bomb"), and a never-completed HEADERS/CONTINUATION block accumulates memory without limit.
3. Control-frame acks (PING/SETTINGS acks, RST_STREAM, GOAWAY, WINDOW_UPDATE) unconditionally bypassed the -socket_max_unwritten_bytes write cap, so a PING flood combined with withheld TCP reads grew the connection buffer without the documented bound.
4. The HPACK dynamic table size update was validated against the protocol default (4096) instead of the advertised SETTINGS_HEADER_TABLE_SIZE, which together with the dynamic-table queue/accounting issue can desynchronize the decoder and dereference NULL (crash).
Affected scenarios:
Any bRPC server serving HTTP/h2/gRPC to an untrusted network, and any bRPC h2/gRPC client connecting to an untrusted backend. The h2 parser runs before any Authenticator check on the shared port.
How to fix:
Upgrade bRPC, or apply the patch in https://github.com/apache/brpc/pull/3474.
Note:
After applying the fix the following limits are enforced by default:
- max_concurrent_streams: 1024 per connection (4294967295 restores unlimited).
- max_header_list_size: 1 MiB decoded size per stream (4294967295 restores unlimited; -h2_client_max_header_list_size for clients).
- h2 control-frame acks respect -socket_max_unwritten_bytes (-h2_ack_ignore_eovercrowded restores the old behavior).
Requests exceeding these limits are rejected (RST_STREAM(REFUSED_STREAM) or a connection error). |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76492 are related to issues concerning null pointers that are grouped under the Common Weakness Enumeration (CWE) Base CWE-476. |
| A null pointer dereference vulnerability in Fortinet FortiOS 7.2.0 through 7.2.4, FortiOS 7.0.0 through 7.0.11, FortiOS 6.4.0 through 6.4.12, FortiOS 6.2.0 through 6.2.14, FortiOS 6.0.0 through 6.0.16, FortiProxy 7.2.0 through 7.2.3, FortiProxy 7.0.0 through 7.0.10, FortiProxy 2.0.0 through 2.0.12, FortiProxy 01.02 all versions, FortiProxy 1.2 all versions, FortiProxy 01.01 all versions, FortiProxy 1.1 all versions, FortiProxy 01.00 all versions allows attacker to denial of service via specially crafted HTTP requests. |
| A BIND resolver that is configured with both a "redirect" zone and "qname-minimization strict" may abort with an assertion failure while processing the redirect.
This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.16.8-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| Adobe Framemaker is affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| HarfBuzz from 8.0.0 through 14.6.0 contains a NULL pointer dereference vulnerability in the experimental WebAssembly shaper host imports buffer_set_contents, face_create, and font_set_coords. Attackers can supply a crafted font whose embedded wasm module passes out-of-range addresses with non-zero lengths, crashing any application that shapes text with the font. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: fix NULL dereference in set_coalesce before first open
The Rx ring priv and index are only set in bcmgenet_init_rx_ring(),
which runs at open. Setting the Rx coalescing parameters on an interface
that was never opened, e.g. "ethtool -C eth0 rx-usecs 50", dereferences
a NULL ring->priv. The oops happens with RTNL held, so networking
stays stuck until a reboot:
Unable to handle kernel paging request at virtual address 0000000000002788
pc : bcmgenet_set_rx_coalesce.isra.0+0x10/0x88
lr : bcmgenet_set_coalesce+0xe8/0x180
Call trace:
bcmgenet_set_rx_coalesce.isra.0+0x10/0x88 (P)
__ethnl_set_coalesce.isra.0+0x490/0x570
ethnl_set_coalesce+0x48/0xc0
ethnl_default_set_doit+0xf4/0x230
genl_family_rcv_msg_doit+0xe8/0x160
genl_rcv_msg+0x220/0x2a0
netlink_rcv_skb+0x68/0x140
genl_rcv+0x40/0x60
netlink_unicast+0x338/0x3c0
netlink_sendmsg+0x19c/0x3f8
__sock_sendmsg+0x64/0xc0
__sys_sendto+0x124/0x198
__arm64_sys_sendto+0x30/0x48
Set priv and index at probe. Writing the registers while the interface
is down is harmless because open resets the MAC and
bcmgenet_init_rx_coalesce() reapplies the stored values.
It was observed on a Raspberry Pi CM4, but should apply to all other
genet devices. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: mtk_eth_soc: allocate dummy netdev sooner
The RX rings and the shared NAPI are carried by an internal "dummy" netdev
(eth->dummy_dev). mtk_probe() creates that dummy device, and adds the
shared tx/rx NAPI to it, only after the MAC netdevs have been registered.
That order has been there since the MT7623 support was added and leaves a
window in which the netdevs are visible to the network core before the
shared NAPI and the dummy device exist.
If anything brings the first netdev up during that window (e.g. netifd
opening the WAN link the instant the interface is registered), the
first-open path runs without them. On NETSYS v2 and later SoCs
mtk_rx_alloc() -> __xdp_rxq_info_reg() then dereferences eth->dummy_dev ==
NULL:
WARNING: CPU: ... Missing net_device from driver
in net/core/xdp.c and mtk_open() fails with -ENODEV. On NETSYS v1 SoCs
(MT7621/MT7622/MT7623/MT7629) there is no page pool, so the same open
instead calls napi_enable() on a napi_struct that netif_napi_add() has not
initialised yet and dereferences a NULL napi->dev.
Allocate the dummy netdev and add the shared tx/rx NAPI to it before the
register_netdev() loop. Both the dummy-allocation failure and a
register_netdev() failure now unwind through mtk_unreg_dev(), which
unregisters the net_device notifiers and the netdevs registered so far,
stopping a concurrently-opened netdev (ndo_stop) and its NAPI before the
dummy carrier is freed.
A netdev that opened during the window can also have queued the
frame-engine reset worker (via the tx watchdog or phylink), so the probe
error path now cancels eth->pending_work before freeing the shared state,
as mtk_cleanup() already does on remove. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: check dc_state_create_copy() for NULL in dm_suspend
dc_state_create_copy() can return NULL on allocation failure.
dm_suspend() only conditionally skips dm_gpureset_toggle_interrupts()
and continues execution, returning success. dm_resume() then
dereferences the NULL cached_dc_state in link_enc_cfg_copy() and the
following dc_state->stream_count loop, crashing during GPU reset
recovery.
Return -ENOMEM immediately if the copy fails, so the caller aborts
suspend instead of leaving a NULL cached state for resume.
(cherry picked from commit 84b6d7932fdd2857795a257f9f258562a3cddcab) |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_fs: Fix NULL pointer dereference in FUNCTIONFS_ENDPOINT_DESC
When user space sets up FunctionFS with only full-speed descriptors
(e.g., flags = FUNCTIONFS_HAS_FS_DESC) and the gadget operates at a
higher speed (such as USB_SPEED_HIGH or USB_SPEED_SUPER),
config_ep_by_speed() detects that the function lacks descriptors for
the current speed, logs a warning, and falls back to full-speed
descriptors. The endpoint is then successfully enabled via
usb_ep_enable(), and epfile->ep becomes valid.
However, when user space subsequently issues the FUNCTIONFS_ENDPOINT_DESC
ioctl to query the endpoint descriptor, ffs_epfile_ioctl() selects the
descriptor index solely based on gadget->speed:
switch (epfile->ffs->gadget->speed) {
case USB_SPEED_SUPER:
case USB_SPEED_SUPER_PLUS:
desc_idx = 2;
break;
case USB_SPEED_HIGH:
desc_idx = 1;
break;
default:
desc_idx = 0;
}
desc = epfile->ep->descs[desc_idx];
memcpy(&desc1, desc, desc->bLength);
Because user space only supplied full-speed descriptors,
epfile->ep->descs[1] is NULL. Dereferencing desc->bLength triggers an
immediate kernel NULL pointer dereference panic.
Fix this by falling back through lower speed descriptors if the current
speed descriptor was not supplied, matching the fallback logic in
config_ep_by_speed() and historical f_fs behavior. If still missing,
fall back to epfile->ep->ep->desc (the active descriptor), and return
-EINVAL safely if no valid descriptor is found. In addition, mark desc
as const to match struct usb_ep::desc and avoid discarding qualifiers. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: cdns3: Fix NULL pointer dereference in cdns3_pci_probe
The Cadence USBSS controller is a two-function PCI device. The first
probed function allocates the driver data and stores it with
pci_set_drvdata(), while the second function reuses it via
pci_get_drvdata() when pci_is_enabled() reports that the first
function has already been probed.
When the second function is probed while the first one has been
enabled but has not yet set its driver data, pci_get_drvdata()
returns NULL, and the subsequent wrap->devfn assignment dereferences
a NULL pointer and crashes the kernel.
logs:
Call trace:
cdns3_pci_probe+0xa4/0x300
local_pci_probe+0x44/0xa8
pci_call_probe+0x54/0x158
pci_device_probe+0x84/0x100
really_probe+0x184/0x3d0
__driver_probe_device+0x80/0x178
driver_probe_device+0x44/0xe8
__driver_attach+0xec/0x1f8
bus_for_each_dev+0x7c/0xe0
driver_attach+0x28/0x38
bus_add_driver+0x110/0x238
driver_register+0x64/0x128
__pci_register_driver+0x50/0x60
cdns3_pci_driver_init+0x28/0x38
do_one_initcall+0x5c/0x280
do_initcalls+0x104/0x1d8
kernel_init_freeable+0x140/0x218
kernel_init+0x28/0x1f8
ret_from_fork+0x10/0x20
Return -EPROBE_DEFER in this case so that probing is retried after
the first function has completed its probe. |
