| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ProPhoenix Law RMS v2022.2403.3.101 was discovered to contain a reflected cross-site scripting (XSS) vulnerability via the PageTitle/Alert/MsgType parameter in the errorHandler.aspx endpoint. |
| Frappe CRM before 1.74.0 contains a missing authorization vulnerability that allows authenticated Sales Users to modify other users' call logs by supplying arbitrary call_sid values. Attackers can call the add_note_to_call_log and add_task_to_call_log endpoints to attach attacker-written notes and tasks that appear on victims' call logs, leads, and deals. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: mdb: Fix source list corruption on a failed replace
When replacing the source list of an MDB remote entry, all existing
sources are first marked for deletion and vxlan_mdb_remote_srcs_add()
is then called to add the new source list. Sources present in the new
list have their deletion mark cleared, and any sources left marked
afterwards are removed.
If vxlan_mdb_remote_srcs_add() fails partway through, its error path
deletes all entries on the remote's source list. That rollback is only
correct for its other caller, vxlan_mdb_remote_add(), where the remote
was just allocated and the list contains solely entries added during
the call. On the replace path the list also holds pre-existing sources,
so a failed replace tears them down together with their (S, G)
forwarding entries instead of leaving the entry unchanged.
This is reachable from an existing (*, G) remote. An EXCLUDE filter
that loses sources starts forwarding traffic that should be blocked,
while an INCLUDE filter that loses sources drops traffic that should be
forwarded.
Mark entries created during the current pass with a new
VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear
the deletion mark on the pre-existing ones, so a failed replace leaves
the source list untouched. Retain the flag until the whole operation
succeeds and then clear it. Also stop vxlan_mdb_remote_src_add() from
deleting a pre-existing entry it only looked up when adding that
entry's forwarding entry fails. |
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Substance3D - Stager is affected by a Stack-based Buffer Overflow vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| IBM Concert 1.0 through 3.0.0 uses weaker than expected cryptographic algorithms that could allow an attacker to decrypt highly sensitive information. |
| Cpanel::JSON::XS versions from 4.20 before 4.80 for Perl write out of bounds when a tied or shared hash grows during canonical encoding in encode_hv.
With canonical, the keys of a tied or threads::shared hash are counted before a second pass collects them for sorting. The encoder uses a fixed 64-entry stack array or, for larger counts, a heap array sized from the first pass. If the second pass exceeds that capacity, entries are written out of bounds before the counts are compared.
This corrupts stack or heap memory and can crash the process. |
| Cpanel::JSON::XS versions before 4.80 for Perl use the parent interpreter's scalars from a parser object cloned into a new ithread.
A parser object holds its callbacks and its incremental parse buffer as raw scalar pointers. When a thread is created, these are copied into the new interpreter unchanged, so the child's parser uses, and later frees, scalars that belong to the parent and may already have been freed there.
A parser created before a thread starts and used inside it can call freed callbacks, corrupt reference counts and crash the process. |
| undici is an HTTP client library for Node.js. In versions 8.11.0 and 8.11.1, its experimental WebSocket client, which is enabled by default when HTTP/2 is allowed, mishandles a failed WebSocket handshake over HTTP/2: the request is already marked completed, so the abort becomes a no-op and the underlying HTTP/2 stream is left open with no error listener. When a malicious server then destroys the connection, the orphaned stream emits an unhandled error and the Node.js process exits. A remote, unauthenticated server can therefore crash any client that opens a WebSocket to it over HTTP/2, resulting in a denial of service. The issue is fixed in undici 8.11.2, and users should upgrade to 8.11.2 or later. As a workaround, set allowH2 to false to disable HTTP/2 for WebSocket connections, or avoid opening WebSocket connections to untrusted servers. |
| undici is an HTTP client library for Node.js. In versions 4.0.0 through 6.29.0, 7.0.0 through 7.30.0, and 8.0.0 through 8.12.1, its Agent dispatcher passes its constructor options through a JSON-based deep clone before forwarding them to each per-origin pool, and because JSON cannot represent functions, a caller-supplied tls option containing a checkServerIdentity callback is silently dropped before it reaches the TLS layer. As a result, a TLS peer whose certificate a custom checkServerIdentity was written to reject, but which passes Node's default hostname and chain checks, is silently accepted. Because Agent is the default dispatcher behind request, fetch, and setGlobalDispatcher, this affects the path most applications use, and EnvHttpProxyAgent is affected on its direct and no-proxy routes as well, while only applications that pass a function-valued tls option such as a custom checkServerIdentity for certificate or public-key pinning are at risk. The issue is fixed in undici 6.29.1, 7.30.1, and 8.12.2, which preserve the tls option outside the JSON clone so custom verification callbacks are forwarded unchanged, and users should upgrade to one of those versions or later. As a workaround, pass the TLS options through connect instead of tls, or for proxied destinations use requestTls and proxyTls. |
| Improper Restriction of XML External Entity Reference vulnerability in Apache Camel.
This issue affects Apache Camel: from 4.7.0 before 4.18.5, from 4.19.0 before 4.22.1.
Improper Restriction of XML External Entity Reference in the Smooks component (camel-smooks) in Apache Camel allows an attacker who supplies the XML message body to read local files or issue requests to internal network locations via an external entity declaration in that body. This issue affects Apache Camel: from 4.7.0 before 4.18.5, from 4.19.0 before 4.22.1. The Smooks data format (.unmarshal().smooks(...)) and the Smooks component (smooks:) parse the incoming XML body with the reader Smooks resolves by default, which is the Woodstox SAX parser. That reader resolves external general and parameter entities and loads external DTDs, and camel-smooks applied none of the parser hardening that the other Camel XML components apply. A DOCTYPE with an external subset, or an external general entity, declared in the XML document is therefore resolved and expanded while the body is unmarshalled, and the resolved content is bound into the unmarshalled result and returned on InOut routes. An external sender whose XML reaches a camel-smooks data format or endpoint could therefore read files readable by the Camel process and cause the process to issue requests to hosts the document names. No non-default option is required, since resolving external entities was the default behaviour. Configurations that declare their own reader - EDI, CSV, JSON, or a custom reader - do not use the XML reader and are not affected. Users are recommended to upgrade to version 4.18.5, 4.22.1 or 4.23.0, which fixes the issue.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. camel-smooks now parses the XML body with a javax.xml.parsers.DocumentBuilder that does not resolve external general or parameter entities and does not load external DTDs, and hands Smooks the resulting document, matching the secure XML processing configuration used by org.apache.camel.converter.jaxp.XmlConverter and the other Camel XML components. This hardening is applied only when the Smooks configuration parses XML with its default reader, so EDI, CSV, JSON and custom-reader configurations, and the marshalling direction, are unchanged. A new allowExternalEntities option, disabled by default, restores the previous behaviour for trusted legacy configurations that rely on external entity resolution. The camel-4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, do not apply camel-smooks to XML received from untrusted senders. |
| Deserialization of Untrusted Data vulnerability in Apache Camel Camel-Jgroups component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
JGroupsEndpoint.createExchange(Message), which CamelJGroupsReceiver calls for every message the jgroups consumer receives before the exchange is routed, set the exchange body from org.jgroups.Message.getObject(). For an ObjectMessage, which is the message type the Camel jgroups producer sends, JGroups Java-deserializes the payload through an ObjectInputStream on its own receive thread as the message arrives, and getObject() returns the resulting object. No java.io.ObjectInputFilter was applied on that path unless the deployment had set a JVM-wide serialization filter: camel-jgroups installed none, and the JGroups versions shipped with the affected releases apply none of their own, so any serializable class on the application classpath could be instantiated and its deserialization callbacks run. Unless a channel or the channelProperties option is configured, the consumer creates its channel with new JChannel(), the stock JGroups protocol stack, which multicasts over UDP without the AUTH protocol and without encryption, so any host able to reach the cluster's multicast group or bind port can join the cluster and send messages to the consumer without credentials. Such a host could send a crafted serialized object that leads to remote code execution in the Camel process when a usable deserialization gadget chain is present on the classpath, and no non-default option was required on the consumer. Because JGroups materializes the object before Camel's receiver runs, a check performed by Camel can only inspect the deserialized result and cannot stop code that runs during deserialization, so closing the issue also requires a control that applies before the payload is read, as described in the mitigation. Exploitation requires network access to the cluster's multicast group or bind port, which with the default UDP multicast transport means a host on an adjacent network, and a usable gadget chain on the classpath, which is why the severity is assessed as high rather than critical.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.1. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, and the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. |
| Improper Neutralization of Special Elements Used in a Template Engine and Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Camel HTTP, Netty HTTP, Undertow and Vert.x HTTP components.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The Camel HTTP producer families let an inbound message override the endpoint URI through the CamelHttpUri and CamelRestHttpUri headers, and then passed that message-supplied string through CamelContext.resolvePropertyPlaceholders() before using it. Property-placeholder resolution is a configuration-resolution facility, not a URI-parsing step: it reaches operating-system environment variables, JVM system properties, every PropertiesFunction registered on the classpath - including the secret functions - and, through camel-bean, the invocation of a no-argument method on any bean in the registry. Applying it to Exchange content therefore turned a URI string into a configuration- and bean-evaluation context. A route author opted into none of this: a plain static to("http://backend/api") was sufficient. Seven call sites were affected: HttpHelper.createURL and HttpHelper.createMethod in camel-http-common, HttpMethodHelper.createMethod in camel-http, VertxHttpHelper.resolveHttpURI in camel-vertx-http, UndertowHelper.createURL and UndertowHelper.createMethod in camel-undertow, and NettyHttpHelper.createURL in camel-netty-http. The bridgeEndpoint option did not bound the exposure: it suppresses the CamelHttpUri override in the createURL family but not in the createMethod family, so a route using the documented bridging configuration still resolved placeholders taken from the header, and CamelRestHttpUri was consumed before any bridgeEndpoint check in all four components. Only camel-http offered an opt-out, skipControlHeaders, which defaults to false. Reaching the headers did not always require header injection, because several Camel HTTP consumers populate CamelHttpUri from the request line themselves as a documented reverse-proxy feature. An unresolvable placeholder additionally produced a RuntimeExchangeException whose message echoed the URI, which distinguishes a set from an unset configuration key even where no outbound request is made. The behaviour predates the 4.x line. This advisory continues the alignment CAMEL-24282 applied to the toD and enrich dynamic-URI EIPs in 4.22.0, extending the same build-time-resolution contract to the HTTP producer components.
Users should upgrade to version 4.23.0, which fixes the issue. Users on the 4.22.x releases stream should upgrade to 4.22.1. Users on the 4.18.x releases stream should upgrade to 4.18.5. The 4.14.x releases stream and earlier reached end of life before this issue was resolved and will not receive a fix, so deployments on those lines must move to a supported release. For deployments that cannot upgrade immediately, strip the override headers at the trust boundary before the producer with removeHeader("CamelHttpUri") and removeHeader("CamelRestHttpUri"), or set skipControlHeaders=true on camel-http endpoints, which is the only component offering that option. Note that bridgeEndpoint=true is not a workaround: it suppresses the header override when the outbound URL is built but not when the header is re-parsed for the query string. Percent-encoding the placeholder delimiters is likewise not a mitigation for camel-netty-http, whose binding decodes the request path before the value reaches the header, so proxy or WAF rules written against the raw delimiters do not help there. As defence in depth, ensure consumers exposed to untrusted senders apply a strict inbound HeaderFilterStrategy over the Camel namespace, and resolve secrets through a vault rather than through environment variables or system properties that a placeholder can name. |
| Improper Handling of Case Sensitivity vulnerability in Apache Camel Netty HTTP component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
The camel-netty-http security constraint compared the request path against the configured context path using a case-sensitive match, while the routing that dispatches the request to the endpoint did not apply the same rule. The two comparisons therefore disagreed for any path whose case differed from the configured value. An external caller could alter the case of a character in a path segment so that the security constraint no longer recognised the path as protected, while the request still dispatched to the same endpoint. The result is that the constraint is skipped and the protected route is reached without satisfying it. No credential, prior access or special configuration is required beyond being able to send a request to the consumer.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The constraint now matches the request path with the same case rules the dispatch uses, so the two can no longer disagree. For deployments that cannot upgrade immediately, place the authorization decision in front of the Camel consumer, for example in a reverse proxy that normalises the request path before forwarding. |
| Server-Side Request Forgery (SSRF) vulnerability in Apache Camel AS2 component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
In the AS2 protocol the sender of a message may request that the Message Disposition Notification be returned asynchronously to an address the sender supplies. camel-as2 took that address from the inbound message and used it as the destination for the outgoing receipt without constraining it to anything the deployment had configured. A remote partner therefore chose the host the Camel instance would connect to when delivering the MDN. That gives server-side request forgery from the position of the AS2 receiver, including reaching hosts that are only routable from inside the deployment's network, and where the outbound connection carries credentials configured for MDN delivery those credentials are presented to the attacker-chosen destination.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The asynchronous MDN destination is now constrained rather than taken verbatim from the inbound message. For deployments that cannot upgrade immediately, restrict outbound connectivity from the AS2 receiver to the partner endpoints it legitimately delivers receipts to, and do not attach credentials to MDN delivery that are valid for any host other than those partners. |
| Permissive Cross-domain Policy with Untrusted Domains vulnerability in Apache Camel Platform HTTP Vertx component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
createCorsHandler() set Access-Control-Allow-Credentials: true outside the origin check, so the header went out on every response to a request carrying an Origin header, including responses to origins the handler had just decided not to allow. When camel.server.cors.origins is unset, the handler treats every origin as allowed and echoes the caller's own Origin back as Access-Control-Allow-Origin. Together those produce the credentialed any-origin configuration that the fetch specification refuses to express as a literal wildcard, which is precisely why reflecting the origin is the usual way around that rule. A page on any origin could therefore make credentialed cross-origin requests to the Camel endpoint and read the responses.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. Access-Control-Allow-Credentials is now sent only when the request origin matched an origin the operator actually configured. With no origin list the origin is still reflected, as before, but credentials are not granted, and Vary: Origin is now set whenever the origin is reflected so that a shared cache cannot serve one origin's response to another. For deployments that cannot upgrade immediately, set camel.server.cors.origins to the explicit list of origins that need access rather than leaving it unset. |
| Generation of Error Message Containing Sensitive Information vulnerability in Apache Camel Knative component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.1.
When processing of an exchange failed on the consumer side, the Knative HTTP consumer wrote the resulting exception back to the remote caller as the response body, including its class name, message and stack trace. An external sender could therefore provoke a failure and read internal detail about the deployment: class and package names, file system or host names carried in exception messages, and the shape of the route. That detail is useful for building a more targeted attack, and where an exception message embeds configuration or connection strings it is disclosure in its own right. camel-knative was the remaining HTTP-family consumer that had not been aligned with the muteException behaviour established for the other HTTP consumers by CAMEL-23651.
Upgrade to Apache Camel 4.23.0, which fixes the issue. Users on the 4.18.x LTS releases stream should upgrade to 4.18.5. Users on the 4.22.x LTS releases stream should upgrade to 4.22.1. The consumer now honours a muteException option that defaults to true, so a route failure returns an empty body with the error status rather than the exception. Set muteException=false to restore the previous output. For deployments that cannot upgrade immediately, add an onException handler that sets the response body explicitly, so that the framework never writes the exception back to the caller. |
