| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: unshare the skb before writing the control block
bcmgenet stores first_cb, last_cb and bytes_sent in the skb control
block and reads them back on completion to free the skb and credit BQL.
ether_setup() leaves IFF_TX_SKB_SHARING set, so the stack can resubmit
a shared skb that is still in the ring. The next transmit overwrites
last_cb, so the earlier slots complete without crediting their bytes
and BQL stalls the queue until the watchdog resets it.
Unshare the skb before writing the control block.
Reproduce with pktgen in clone_skb mode, which hands the driver the same
skb while earlier copies are still in the ring:
modprobe pktgen
pg=/proc/net/pktgen
echo "add_device eth0" > $pg/kpktgend_0
echo "dst_mac AA:BB:CC:DD:EE:FF" > $pg/eth0
echo "dst 192.0.2.1" > $pg/eth0
echo "clone_skb 8" > $pg/eth0
echo "count 0" > $pg/eth0
echo start > $pg/pgctrl &
sleep 5
echo stop > $pg/pgctrl
wait
cat /sys/class/net/eth0/queues/tx-0/byte_queue_limits/inflight
inflight stays nonzero on the now idle queue. clone_skb 0 leaves it at
zero. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libsas: Fix SMP IO deadlock during HA resume
smp_execute_task_sg() calls pm_runtime_get_sync() on the host before
issuing an SMP command. When that command is itself issued from the HA
resume path, the get_sync() deadlocks: it waits for the ongoing resume
(the device is RPM_RESUMING), while the resume is blocked in
sas_drain_work() waiting for that same SMP IO to complete.
The deadlock needs an expander-attached SATA disk. During
sas_resume_ha() -> sas_drain_work(), DISCE_RESUME -> sas_resume_sata()
-> ata_sas_port_resume() requests ATA_EH_RESET, and the hard reset for
such a disk is done via SMP PHY CONTROL (sas_ata_hard_reset() ->
sas_phy_reset() -> sas_smp_phy_control() ->
smp_execute_task_sg()). Direct-attached SATA resets through
lldd_control_phy() and SSP devices use TMFs, so neither hits this.
Replace the get_sync()/put_sync() pair with
pm_runtime_get_noresume()/pm_runtime_put(). smp_execute_task_sg() only
needs to hold off autosuspend while the SMP is in flight, and it must
not try to resume the host: a sync resume issued from the HA resume path
itself is what deadlocks, and by the time sas_resume_ha() runs, hw_init
has already reinitialized the hardware, so the device is accessible
without one.
The usage reference is still required. Discovery work normally runs
inside an event worker's PM reference, taken at sas_notify_port_event()
notify time and held until the handler has flushed the disco
queue. sas_rediscover_ex_phy() however requeues DISCE_REVALIDATE_DOMAIN
from within the revalidation worker itself, and flush_workqueue() does
not wait for work items queued during execution, so that chained
revalidation runs with no outer PM reference - without the
get_noresume(), its SMP could race autosuspend.
For the BSG path, sas_smp_handler() is the only caller which may find
the host autosuspended: expander SMP requests do not go through any SCSI
device request queue, so nothing else in that path holds the host
awake. Resume it there with pm_runtime_resume_and_get() and check the
result. |
| IDOR in Cervantes version v1.3-beta could allow an authenticated attacker ca access sensitive findings, proof-of-concept details, credentials, and client information from projects they do not belong to. Additionally, they can modify finding statuses and transfer findings to their own projects, compromising data confidentiality and integrity. |
| BOLA Allows Cross-Project Target Tampering
in Cervantes version v1.3-beta could allow an attacker modify or delete targets belonging to other projects without authorization, compromising the integrity of penetration testing scopes, results, and associated security reports. |
| Stored XSS vulnerability in the “Notes” field of the Checklists in Cervantes version v1.3-beta could allow an attacker to execute arbitrary code in another user's browser with elevated privileges |
| A flaw was found in gcc. An attacker could cause a Denial of Service (DoS) by passing a string that is not null-terminated to the std::from_chars() function in the libstdc++ library. This issue triggers an out-of-bounds read beyond the allocated buffer, potentially leading to invalid data parsing or an application crash. |
| Parse Server before 8.6.109 and 9.0.0 before 9.10.6-alpha.1 returns stored field values in object update responses without checking read access, so clients whose class-level permissions or object ACLs allow update but not read can see object data. Attackers can update such objects to read atomic operation results (Increment, Add, AddUnique, Remove), Cloud Code trigger-set values, and, for dot notation keys under certain conditions, the whole stored parent field. |
| A flaw was found in libxml2 with Python bindings enabled. A remote attacker could exploit this vulnerability by providing a specially crafted XML document containing a Document Type Definition (DTD) with enumerated attribute values. This triggers a double-free error in the SAX attributeDecl callback handler, where a string is freed twice. This flaw can lead to a denial of service (DoS) due to a reproducible crash in Python applications using the libxml2 SAX bindings. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 19.2 before 19.2.8, 19.3 before 19.3.5, and 19.4 before 19.4.2 that, under certain conditions, could have allowed an unauthenticated user to execute arbitrary code on the GitLab server via a specially crafted regular expression in a CI/CD configuration, due to insufficient regular expression validation. |
| Joomla Extension - joomshaper.com - Stored Cross-Site Scripting (XSS) in MegaMenu Layout Container & Embed Inputs in Helix Ultimate < 2.2.11 - Unsanitized column and item configuration values stored within the MegaMenu layout JSON were rendered without complete contextual escaping, allowing injection of malicious HTML/JS. Stricter sanitization and tag allowlists via `InputFilter` and `htmlspecialchars` were implemented. |
| This issue affects Apache Fineract versions up to and including 1.15.0. The Center read endpoint (GET /api/v1/centers) and the datatable entry read endpoints (GET /api/v1/datatables/{datatable}/{apptableId} and GET /api/v1/datatables/{datatable}/{apptableId}/{datatableId}) concatenate caller-supplied ordering parameters (orderBy, sortOrder, order) directly into the SQL ORDER BY clause. The existing regex-based input validation can be bypassed, allowing time-based blind SQL injection by any authenticated user with read access to centers or to the targeted datatable.
Users are recommended to upgrade to 1.16.1 which fixes the issue. |
| Improper Neutralization of Special Elements used in an SQL Command ("SQL Injection") vulnerability exists in Apache Fineract (through version 1.15.0). The vulnerability affects the outStandingAmountPercentageCondition parameter of the /fineract-provider/api/v1/search/advance HTTP API endpoint, allowing SQL injection due to insufficient input neutralization. Users are recommended to upgrade to version 1.16.1, which will fix the issue. |
| Joomla Extension - tassos.gr - Client-controlled validation bypass in Convert Forms extension 1.0.0-4.4.16, 5.0.0-5.2.5 - CAPTCHA and field validation bypass. |
| Missing authorization in the unit resources download route in Canonical Juju 4.0 through 4.0.15 allows a controller-authenticated principal (a unit agent, or a user with only login permission) to read any application's charm resource in any model, including container-registry credentials, via a crafted request naming an arbitrary unit. |
| The authentication framework used by affected Kiloview E3 NDI encoder firmware signs session JSON Web Tokens using an HMAC-SHA256 secret hardcoded as a static string within the firmware image, identical across all deployed devices. An attacker with access to the publicly distributed firmware can recover this secret and forge arbitrary session tokens, including administrative tokens, without valid credentials, enabling unauthenticated access to privileged device functions. |
| `JwtClaims.MarshalJSON` built a Go struct at runtime with `reflect.StructOf`, synthesising a field named `"A" + claimName` for each untyped claim. `reflect.StructOf` **panics** when a field name is not a valid Go identifier, or when it duplicates another field. Both conditions are reachable from ordinary JWT claim names. |
| `jwkFields.CheckConsistency` detected duplicate `key_ops` entries with a pairwise nested loop, making validation cost grow with the **square** of the entry count. Because the check runs on every JWK and JWKS unmarshal, a modestly sized but hostile JWKS document could occupy a CPU core for many seconds. |
| `JwksTrustStore.Get` assigned each parsed key to the function's **named return value** while refreshing the JWKS cache. When the requested `kid` was not present, the trailing naked `return` handed the caller the last key in the JWKS document together with a `nil` error — a confidently wrong answer instead of "not found". |
| `AesGcmCryptor.Open` passed a caller-supplied nonce straight to `cipher.AEAD.Open` without checking its length. The Go standard library **panics** rather than returning an error when a GCM nonce is not exactly `NonceSize()` bytes, so a JWE carrying a wrong-sized IV crashes the decrypting goroutine. |
| A sensitive information disclosure vulnerability in the command line interface of AOS-10 could allow an unauthenticated remote attacker to access sensitive information. Successful exploitation could allow an attacker to retrieve information which could be used to potentially gain further access to network services supported by AOS-10. |
