| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper validation of specified quantity in input, Allocation of resources without limits or throttling, Excessive Iteration vulnerability in Apache Thrift PHP bindings.
This issue affects Apache Thrift: before 0.25.0.
Users are recommended to upgrade to version 0.25.0, which fixes the issue. |
| IVFFlat index build in pgvector before 0.8.7 allows a database user to write data out-of-bounds, which can lead to arbitrary code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: cap out-of-range rx MCS instead of leaving bogus rate
ath11k can receive HT/VHT/HE frames whose reported MCS is above the
maximum that can be expressed in the corresponding mac80211 rate space
(e.g. an HE frame reported with MCS 12, while HE tops out at MCS 11).
The frame itself is valid and decodes correctly, but for such a frame
ath11k_dp_rx_h_rate() leaves rx_status->rate_idx set to the out-of-range
value and never assigns rx_status->encoding, so it stays RX_ENC_LEGACY
from the ath11k_dp_rx_h_ppdu() initialization. Once that frame reaches
mac80211 it trips the rate sanity check and the frame is dropped with a
splat:
ath11k_pci 0000:03:00.0: Received with invalid mcs in HE mode 12
WARNING: CPU: 0 PID: 0 at net/mac80211/rx.c:5433 ieee80211_rx_list+0xb0a/0xe90 [mac80211]
Dropping the frame would discard otherwise valid data, so instead cap the
reported MCS to the maximum the rate space can express and deliver the
frame. Set rx_status->encoding before the range check and assign rate_idx
from the capped value, so a frame with an out-of-range MCS no longer
leaves partial or bogus rate metadata behind. Also downgrade the logging
level since they are not treated as invalid frames now. The only loss is
that such a frame is reported as the capped MCS in the rx rate statistics.
Tested-on: WCN6855 hw2.1 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.41 |
| MikroTik RouterOS before 7.25beta4 contains an improper input validation vulnerability in the labelled-VPN NLRI iterators of the routing service that allows an unauthenticated on-path attacker to crash the BGP service by sending a malformed MP_REACH_NLRI UPDATE message with a prefix-length value below the minimum valid for a labelled-VPN NLRI, which passes validation while describing a route with a negative-length address portion. Attackers can repeatedly send a single BGP UPDATE packet carrying a VPNv4 or VPNv6 NLRI with an out-of-bounds prefix-length to indefinitely hold down the BGP plane, causing session termination without a NOTIFICATION and triggering a service malfunction on the device. The fix is carried only in 7.25beta4, a development build; the current stable release 7.24.2 and the current long-term release 7.23.5 both remain affected. |
| Improper validation of specified quantity in input vulnerability in PayTR Payment and Electronic Money Institution Inc. PayTR Virtual Pos iFrame API WHMCS Module allows Input Data Manipulation.
This issue affects PayTR Virtual Pos iFrame API WHMCS Module: from v9.0.0 before v9.0.3. |
| Two issues in the ThreadX loadable-module loader, reached when a device loads an attacker-controlled module object via `_txm_module_manager_memory_load` / `_txm_module_manager_in_place_load` — APIs that take ONLY a base pointer, no image length, so every size/offset field in `TXM_MODULE_PREAMBLE` is fully attacker-trusted: (1) a heap OOB **read** (`code_size` trusted as the source-image length in the code-copy loop), and (2) a control-flow-integrity / defense-in-depth gap (module entry/start/callback/stop pointers computed as `code_start + preamble_offset` with only a `!= 0` check, and the preamble `checksum` never verified). No controlled OOB write was found (honest — the copy destination is overflow-guarded). |
| Mounting an attacker-controlled NAND flash image (`lx_nand_flash_open()`) triggers an unbounded out-of-bounds heap **write** in LevelX's NAND flash-translation-layer metadata parser that overwrites a driver function pointer in the control block, giving a demonstrated control-flow hijack — RIP set to a full 8-byte attacker-chosen value (register-verified). Two accompanying OOB reads. All reproduced verbatim under ASan at HEAD `9f1cfdc`. (The affected metadata-parser header states "Some portions generated by Copilot (Sonnet 4.6)" — an AI-generated parser with an unchecked on-flash count.) |
| Subscriber Other Vulnerability Type in Creator LMS <= 1.2.19 versions. |
| redis-parser through 3.0.0 fails to validate the multi-bulk length value in RESP protocol parsing, allowing attackers to trigger an uncaught RangeError by supplying an excessively large declared length. A malicious or compromised Redis endpoint can deliver a crafted RESP header with a length above 2^32-1 to crash the Node.js client process. |
| CordysCRM is an open source AI-powered customer relationship management system that supports private deployment. From 1.7.0 until 1.7.4, POST /account-pool/page allows an authenticated caller with MODULE_SETTING_UPDATE to place an arbitrary database function in SortRequest.name because CustomerPoolController.page omits Spring request validation, SortRequest.getName relies on an incomplete blacklist, and the CommonMapper.xml sort fragment inserts ${sortName} into an ORDER BY clause. Functions such as extractvalue and updatexml bypass the blacklist and can expose database values through an error oracle when the query returns at least one row. This issue is fixed in version 1.7.4. |
| A Security Policy Bypass vulnerability exists in Forcepoint Security Engine (NGFW).
This issue affects Forcepoint Security Engine (NGFW): from 7.1.0 through 7.1.13, from 7.3.0 through 7.3.1, 7.3.3, from 7.4.0 through 7.4.1, and 7.5.0. |
| Improper Validation of Specified Quantity in Input and Allocation of Resources Without Limits or Throttling vulnerability in Samsung Open Source rlottie allows Excessive Allocation. |
| Improper Validation of Specified Quantity in Input vulnerability in Samsung Open Source rlottie allows Input Data Manipulation. |
| source-map-js through 1.2.1 fails to validate the per-section offset line value in indexed source maps, allowing attackers to specify arbitrary numeric values. Attackers can supply extremely large offset line values that cause synchronous event loop blocking for extended periods, preventing the service from handling other requests. |
| Vulnerability in the Oracle Applications Manager product of Oracle E-Business Suite (component: Command Line - RapidClone). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Applications Manager. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Applications Manager accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). |
| Improper Validation of Specified Quantity in Input in ZenHive mpp allows a client holding an open payment channel to obtain paid resources without being charged.
MPP.Session.Actions.accept_voucher/3 in lib/mpp/session/actions.ex treats a voucher whose cumulativeAmount equals the channel's already-accepted cumulative amount as an idempotent success, returning the channel unchanged without calling maybe_spend/2. The credential verifies, the protected resource is served, and spent and units stay where they were. Because the server issues a fresh challenge per request and the credential replay store keys on challenge id and payload, the same signed voucher can be re-presented under every new challenge, so one paid voucher yields an unbounded number of paid units. The path is reachable from any method built on MPP.Session.Method through the Plug, MCP, JSON-RPC and WebSocket transports.
This issue affects mpp: from 0.14.0 before 0.16.2. |
| c-ares is an asynchronous resolver library. Prior to 1.34.7, ares_dns_parse() trusts the attacker-controlled ANCOUNT, NSCOUNT, and ARCOUNT fields before confirming that the DNS response contains enough bytes for the claimed records. Because process_answer() invokes parsing before transaction ID and question validation, a malicious DNS response can cause ares_dns_record_rr_prealloc() and ares_array_set_size() to reserve disproportionate heap memory for a tiny message. Repeated responses create large allocation and release cycles that can degrade or deny name resolution, without causing memory corruption or information disclosure. This issue is fixed in version 1.34.7. |
| OpenSlide is a C library for reading whole slide image files. From 3.4.1 until 4.0.1, OpenSlide's parse_level0_xml() processing in src/openslide-vendor-ventana.c accepts nonpositive row or column tile counts from a crafted Ventana BIF file. The invalid counts produce attacker-controlled relative memory offsets and allow arbitrary values to be written at those offsets, affecting all supported platforms and configurations and resulting in a crash or potential arbitrary code execution. This issue is fixed in version 4.0.1. |
| IBM Controller 11.0.0 through 11.0.1 FP7, and 11.1.0 through 11.1.3 FP1 could allow an authenticated user to bypass input validation due to improper validation of client-side input of file size. |
| Pomerium is an identity and context-aware access proxy. Prior to 0.32.8, decodeQueryStringV2 in pkg/hpke/url.go performs zstd decompression of attacker-controlled data without an output-memory limit when DecryptURLValues processes HPKE V2 values for Stateless.Callback in internal/authenticateflow/stateless.go. In hosted or stateless authentication deployments, an unauthenticated attacker can obtain the receiver key from /.well-known/pomerium/hpke-public-key, provide a matching attacker-controlled sender key, and send a compressed payload to /.pomerium/callback that expands before validateSenderPublicKey rejects the sender. This can allocate hundreds of megabytes per request, exhaust proxy memory, crash or degrade the process, and block access to applications protected by the deployment. Stateful deployments are not affected because the stateful callback verifies its HMAC signature before decryption and decompression. This issue is fixed in version 0.32.8. |
