| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper input validation in the Intel Edger8r Tool for some Intel(R) SGX SDK may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Exposure of sensitive information to an unauthorized actor for some Edge Orchestrator software before version 24.11.1 for Intel(R) Tiber(TM) Edge Platform may allow an authenticated user to potentially enable denial of service via adjacent access. |
| A vulnerability was found in Vivotek NVR ND8422P, NVR ND9525P and NVR ND9541P 2.4.0.204/3.3.0.104/4.2.0.101. It has been classified as problematic. Affected is an unknown function of the component HTML Form Handler. The manipulation leads to inclusion of sensitive information in source code. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Certain Cypress (and Broadcom) Wireless Combo chips, when a January 2021 firmware update is not present, allow memory access via a "Spectra" attack. |
| OpenTelemetry dotnet is a dotnet telemetry framework. In affected versions of `OpenTelemetry.Instrumentation.Http` and `OpenTelemetry.Instrumentation.AspNetCore` the `url.full` writes attribute/tag on spans (`Activity`) when tracing is enabled for outgoing http requests and `OpenTelemetry.Instrumentation.AspNetCore` writes the `url.query` attribute/tag on spans (`Activity`) when tracing is enabled for incoming http requests. These attributes are defined by the Semantic Conventions for HTTP Spans. Up until version `1.8.1` the values written by `OpenTelemetry.Instrumentation.Http` & `OpenTelemetry.Instrumentation.AspNetCore` will pass-through the raw query string as was sent or received (respectively). This may lead to sensitive information (e.g. EUII - End User Identifiable Information, credentials, etc.) being leaked into telemetry backends (depending on the application(s) being instrumented) which could cause privacy and/or security incidents. Note: Older versions of `OpenTelemetry.Instrumentation.Http` & `OpenTelemetry.Instrumentation.AspNetCore` may use different tag names but have the same vulnerability. The `1.8.1` versions of `OpenTelemetry.Instrumentation.Http` & `OpenTelemetry.Instrumentation.AspNetCore` will now redact by default all values detected on transmitted or received query strings. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Nuxt is an open-source web development framework for Vue.js. Starting in version 3.8.1 and prior to version 3.15.3, Nuxt allows any websites to send any requests to the development server and read the response due to default CORS settings. Users with the default server.cors option using Vite builder may get the source code stolen by malicious websites. Version 3.15.3 fixes the vulnerability. |
| The Order Export for WooCommerce plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 3.24 via the 'uploads' directory. This makes it possible for unauthenticated attackers to extract sensitive data stored insecurely in the /wp-content/uploads directory which can contain exported order information. The plugin is only vulnerable when 'Order data storage' is set to 'WordPress posts storage (legacy)', and cannot be exploited when the default option of 'High-performance order storage' is enabled. |
| CVE-2025-1701 is a high-severity vulnerability in the MIM Admin service. An attacker could exploit this vulnerability by sending a specially crafted request over the RMI interface to execute arbitrary code with the privileges of the MIM Admin service. The RMI interface is only accessible locally (listening on 127.0.0.1), limiting the attack vector to the local machine. This means that in a properly configured hospital environment, an attacker must have already compromised the network and additionally compromised the system where the MIM Admin service is running. From there, attackers with sufficient knowledge of MIM's implementation, library usage, and functionality with access to extend the MIM RMI library could force the MIM Admin service to run commands on the local machine with its privileges.
Users of MIM Software products exposed via RDP or multi-user application virtualization system should take note that the system being exposed is the environment hosting the virtualized MIM client.
This issue affects MIM Admin Service: before 7.2.13, 7.3.8, 7.4.3 |
| A vulnerability was found in Multilaser Sirius RE016 MLT1.0. It has been rated as problematic. This issue affects some unknown processing of the file /cgi-bin/cstecgi.cgi. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Insertion of Sensitive Information Into Sent Data vulnerability in Blockspare Blockspare blockspare allows Retrieve Embedded Sensitive Data.This issue affects Blockspare: from n/a through <= 3.2.13.2. |
| Netis E1+ 1.2.32533 contains an information disclosure vulnerability that allows unauthenticated attackers to retrieve WiFi passwords through the netcore_get.cgi endpoint. Attackers can send a GET request to the endpoint to extract sensitive network credentials including SSID and WiFi passwords in plain text. |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 800 Series Ethernet before version 1.17.2 may allow an authenticated user to potentially enable escalation of privilege via local access. |
| Plain Craft Launcher (PCL) is a launcher for Minecraft. PCL allows users to use homepages provided by third parties. If controls such as WebBrowser are used in the homepage, WPF will use Internet Explorer to load the specified webpage. If the user uses a malicious homepage, the attacker can use IE background to access the specified webpage without knowing it. This vulnerability is fixed in 2.9.3. |
| A security issue in the runtime event system allows unauthenticated connections to receive a reusable API token. This token is broadcasted over a WebSocket and can be intercepted by any local client listening on the connection. |
| Vulnerability in Wikimedia Foundation MediaWiki. This vulnerability is associated with program files includes/user/User.Php.
This issue affects MediaWiki: from 1.27.0 before 1.39.13, 1.42.7 1.43.2, 1.44.0. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Wikimedia Foundation MediaWiki. This vulnerability is associated with program files includes/htmlform/fields/HTMLUserTextField.Php.
This issue affects MediaWiki: from * through 1.39.12, 1.42.76 1.43.1, 1.44.0. |
| A security issues exists within Studio 5000 Logix Designer due to unsafe handling of environment variables. If the specified path lacks a valid file, Logix Designer crashes; However, it may be possible to execute malicious code without triggering a crash. |
| mod_auth_openidc is an OpenID Certified authentication and authorization module for the Apache 2.x HTTP server that implements the OpenID Connect Relying Party functionality. Prior to 2.4.16.11, a bug in a mod_auth_openidc results in disclosure of protected content to unauthenticated users. The conditions for disclosure are an OIDCProviderAuthRequestMethod POST, a valid account, and there mustn't be any application-level gateway (or load balancer etc) protecting the server. When you request a protected resource, the response includes the HTTP status, the HTTP headers, the intended response (the self-submitting form), and the protected resource (with no headers). This is an example of a request for a protected resource, including all the data returned. In the case where mod_auth_openidc returns a form, it has to return OK from check_userid so as not to go down the error path in httpd. This means httpd will try to issue the protected resource. oidc_content_handler is called early, which has the opportunity to prevent the normal output being issued by httpd. oidc_content_handler has a number of checks for when it intervenes, but it doesn't check for this case, so the handler returns DECLINED. Consequently, httpd appends the protected content to the response. The issue has been patched in mod_auth_openidc versions >= 2.4.16.11. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Crestron Automate VX allows Functionality Misuse.
When Enable Debug Images in Crestron Automate VX is active, snapshots of the captured video or portions thereof are stored locally on the system, and there is no visible indication that this is being done.
This issue affects Automate VX: from 5.6.8161.21536 through 6.4.0.49. |
| A vulnerability was found in ESAPI esapi-java-legacy and classified as problematic. This issue affects the interface Encoder.encodeForSQL of the SQL Injection Defense. An attack leads to an improper neutralization of special elements. The attack may be initiated remotely and an exploit has been disclosed to the public. The project was contacted early about this issue and handled it with an exceptional level of professionalism. Upgrading to version 2.7.0.0 is able to address this issue. Commit ID f75ac2c2647a81d2cfbdc9c899f8719c240ed512 is disabling the feature by default and any attempt to use it will trigger a warning. And commit ID e2322914304d9b1c52523ff24be495b7832f6a56 is updating the misleading Java class documentation to warn about the risks. |
