| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/tegra241-cmdqv: Don't fall back to a freed smmu after devm_krealloc()
__tegra241_cmdqv_probe() uses devm_krealloc() to grow @smmu into the larger
tegra241_cmdqv, which frees the original @smmu once it relocates. A failure
after that returned NULL, and the caller then dereferenced the freed @smmu
on its fallback path.
Return an int and take @smmu by reference instead, then update *smmu to the
reallocated pointer after devm_krealloc() succeeds, so the caller and its
fallback path both use the live @smmu rather than the freed original. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: don't tear down KMS twice when KMS init fails
When priv->kms_init() (mdp4_kms_init() / mdp5_kms_init()) fails partway
through, both display drivers already tear their KMS state down via
mdp4_destroy() / mdp5_kms_destroy() before returning the error. The
common error path in msm_drm_init() then runs msm_drm_uninit() ->
msm_drm_kms_uninit(), which tries to destroy the very same KMS a second
time, which causes a use-after-free crash.
Bring MDP4/MDP5 in line with the DPU driver whose dpu_kms_init() doesn't
perform error cleanup on the failure. Let the common path own the
cleanup, instead of freeing the KMS from their error paths.
The crash trace for the reference:
__lock_acquire from lock_acquire (kernel/locking/lockdep.c:5906 kernel/locking/lockdep.c:5863)
lock_acquire from touch_wq_lockdep_map (kernel/workqueue.c:4094 (discriminator 1))
touch_wq_lockdep_map from __flush_workqueue (kernel/workqueue.c:4136)
__flush_workqueue from msm_drm_kms_uninit (drivers/gpu/drm/msm/msm_kms.c:243 (discriminator 33))
msm_drm_kms_uninit from msm_drm_uninit (drivers/gpu/drm/msm/msm_drv.c:93)
msm_drm_uninit from msm_drm_init (drivers/gpu/drm/msm/msm_drv.c:184)
msm_drm_init from try_to_bring_up_aggregate_device (drivers/base/component.c:249 drivers/base/component.c:227)
try_to_bring_up_aggregate_device from __component_add (drivers/base/component.c:269 drivers/base/component.c:748)
__component_add from dsi_host_attach (drivers/gpu/drm/msm/dsi/dsi_host.c:1739)
dsi_host_attach from mipi_dsi_attach (drivers/gpu/drm/drm_mipi_dsi.c:383)
mipi_dsi_attach from sharp_nt_panel_probe (drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c:247)
Patchwork: https://patchwork.freedesktop.org/patch/742068/ |
| In the Linux kernel, the following vulnerability has been resolved:
blk-cgroup: fix race between policy activation and blkg destruction
When switching an IO scheduler on a block device, blkcg_activate_policy()
allocates blkg_policy_data (pd) for all blkgs attached to the queue.
However, blkcg_activate_policy() may race with concurrent blkcg deletion,
leading to use-after-free and memory leak issues.
The use-after-free occurs in the following race:
T1 (blkcg_activate_policy):
- Successfully allocates pd for blkg1 (loop0->queue, blkcgA)
- Fails to allocate pd for blkg2 (loop0->queue, blkcgB)
- Enters the enomem rollback path to release blkg1 resources
T2 (blkcg deletion):
- blkcgA is deleted concurrently
- blkg1 is freed via blkg_free_workfn()
- blkg1->pd is freed
T1 (continued):
- Rollback path accesses blkg1->pd->online after pd is freed
- Triggers use-after-free
In addition, blkg_free_workfn() frees pd before removing the blkg from
q->blkg_list. This allows blkcg_activate_policy() to allocate a new pd
for a blkg that is being destroyed, leaving the newly allocated pd
unreachable when the blkg is finally freed.
Fix these races by extending blkcg_mutex coverage to serialize
blkcg_activate_policy() rollback and blkg destruction, ensuring pd
lifecycle is synchronized with blkg list visibility. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate inline xattrs during inode block validation
Patch series "ocfs2: validate xattr entry bounds", v7.
This series validates OCFS2 xattr entry name/value bounds when xattr
metadata is read and validated, before getxattr() or listxattr() can walk
out-of-range entry arrays or offsets from corrupted metadata.
This patch (of 2):
ocfs2_validate_inode_block() verifies a dinode before OCFS2 users walk
metadata from it, but inline xattr metadata is still checked only in
operation-specific consumers. The existing ibody lookup helper validates
inline header placement and entry count, but inode block validation does
not reject entry name/value bounds.
Add a flat xattr entry validator and call it from inode block validation
for inline xattrs. Keep the operation paths on their existing
header/count lookup checks; the full entry bounds check now runs when the
inode block is validated at read time.
Reject corrupted inline xattr metadata before ocfs2_xattr_ibody_get() or
listxattr() can walk past the inline storage.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in ocfs2_xattr_find_entry+0x5a/0x170
Read of size 2 at addr ffff8881242a2000 by task python3/529
Call Trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
kasan_report+0xe0/0x110
ocfs2_xattr_find_entry+0x5a/0x170
ocfs2_xattr_get_nolock+0x20a/0x820
ocfs2_xattr_get+0x10c/0x1e0
__vfs_getxattr+0xe2/0x130
vfs_getxattr+0x185/0x1b0 |
| In the Linux kernel, the following vulnerability has been resolved:
module/dups: Fix use-after-free in kmod_dup_req lifetime handling
The kmod dups code uses RCU to ensure that a kmod_dup_req instance is freed
only after it is no longer referenced. When releasing an instance, the
kmod_dup_request_delete() function removes the kmod_dup_req from the
dup_kmod_reqs list, waits via synchronize_rcu() and finally frees it.
However, this doesn't work correctly because parallel users referencing the
instance in kmod_dup_request_exists_wait() don't enter an RCU read-side
critical section. This can result in a use-after-free.
The kmod_dup_request_exists_wait() function may need to hold a valid
reference to a kmod_dup_req instance across a blocking wait until the
corresponding modprobe command completes. This makes it unsuitable for RCU.
Fix the issue by changing the lifecycle management of kmod_dup_req to use
reference counting. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: don't clobber the extent buffer when zeroing it out
On a zoned filesystem a freed-but-still-dirty tree block is written out
as zeros (EXTENT_BUFFER_ZONED_ZEROOUT) only to keep the zone write
pointer advancing. btree_csum_one_bio() implemented this by memzeroing
the extent buffer's own folios before submission.
That destroys the in-memory buffer while it may still be referenced. In
particular btrfs_free_tree_block() can run on it afterwards and reads
the header to add a delayed reference; once the header has been zeroed
it frees bytenr 0 and corrupts the extent tree (the
btrfs_header_bytenr(buf) != 0 ASSERT in btrfs_free_tree_block(), or an
"unable to find ref" abort). It is flaky and reproduces under fsstress,
e.g. generic/461 and generic/013.
Write the zeros to disk from the shared zero page instead and leave the
extent buffer content untouched, so any later reference - including the
delayed reference from btrfs_free_tree_block() - still sees a valid
header. end_bbio_meta_write() now clears writeback on the buffer's own
folios, as the bio no longer carries them. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: use proto_lock for l2cap_data to fix l2cap_disconn_ind
hci_conn::l2cap_data is accessed without locks in l2cap_disconn_ind via
hci_conn_timeout (disc_work) -> hci_proto_disconn_ind ->
l2cap_disconn_ind. This is UAF if the l2cap_conn is deleted
concurrently.
disc_work is disabled sync in hci_conn_del(), so we cannot take
hci_dev_lock in disc_work.
Fix by using proto_lock to guard l2cap_data, in addition to hdev->lock
which is held in other access paths. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Flush context cache with correct SID when tearing down aliases
domain_context_clear_one() and device_pasid_table_teardown() are both
invoked once per DMA alias of a device. Each function locates the context
entry using the bus/devfn pair provided by the pci_for_each_dma_alias()
callback, then calls intel_context_flush_no_pasid(), which constructs a
device-selective context-cache invalidation from info->bus and
info->devfn (that is, always the requester ID of the device itself).
As a result, for every alias other than the device’s own RID, the context
entry that was just cleared in memory is never invalidated in the context
cache. Hardware may continue using that stale cached entry. In the
scalable-mode teardown path, intel_pasid_free_table() can then free the
PASID directory still referenced by that stale entry, allowing the IOMMU
to walk freed memory.
Fix this by passing the source ID of the entry being torn down to
intel_context_flush_no_pasid(), instead of deriving it from @info. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: dwc3: clear forceRM when issuing EndTransfer
The forceRM bit of the DEPCMD register controls the behavior of the
EndTransfer command used to stop an active transfer. Older DWC3
programming guide revisions recommended setting forceRM=1 when
issuing EndTransfer. Newer programming guide revisions recommend
issuing EndTransfer with forceRM cleared.
With forceRM=1 on DWC_usb31 v2.00a and v2.10a controllers, a transfer
aborted through the ep_dequeue path was observed to remain active
after EndTransfer completion. A subsequent StartTransfer issued on the
same endpoint triggered writes associated with the aborted transfer.
This resulted in an SMMU fault because the transfer buffer had already
been unmapped during EndTransfer command-completion cleanup.
Using forceRM=0 eliminates the issue. Although older DWC3 programming
guide revisions recommended setting forceRM=1, no issues are known
from using forceRM=0. Clear forceRM when issuing EndTransfer to provide
consistent EndTransfer behavior and align with newer programming guide
recommendations. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-v3: take an LPI reference in vgic_v3_save_pending_tables
vgic_v3_save_pending_tables() iterates dist->lpi_xa using xa_for_each()
and dereferences the returned struct vgic_irq in the loop body without
holding a reference on the LPI.
The xarray iterator only provides temporary RCU coverage while looking up
the current entry. That is not sufficient for this loop body, which reads
fields from struct vgic_irq and performs guest memory accesses before the
iteration completes.
A concurrent path can trigger this race: the irqfd cached injection path
(vgic_its_inject_cached_translation) obtains a transient LPI reference
via vgic_its_check_cache() without holding kvm->lock, vcpu->mutex,
config_lock, or its_lock. If guest ITS DISCARD then drops the cache and
ITE references under its_lock, the transient inject reference may become
the final one. When vgic_put_irq() drops it, the LPI is erased from
lpi_xa and freed via kfree_rcu(). Meanwhile, vgic_v3_save_pending_tables()
may still hold a stale pointer obtained from the xarray iterator and
dereference it after the RCU grace period completes.
Fix this by re-fetching each iterated LPI via vgic_get_irq(), which takes
a stable reference, and dropping it with vgic_put_irq() on all paths.
This matches the pattern already used by other lpi_xa iterators in the
vgic ITS code. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Clear rb node linkage when freeing bpf_rb_root
bpf_rb_root_free() detaches the root by copying the current rb_root_cached
and then replacing the live root with RB_ROOT_CACHED. It then walks the
copied root and drops each object contained in the tree.
This leaves the rb node state intact while dropping the object. If the
object is refcounted and survives the drop, its bpf_rb_node_kern still
contains an owner pointer to the freed root and stale rb tree linkage. If
a later bpf_rb_root allocation reuses the same address, bpf_rbtree_remove()
can incorrectly pass the owner check and call rb_erase_cached() on a node
whose rb pointers belong to the old tree.
Mirror the list draining behavior by marking nodes as busy while the root
is being detached, then clear the rb node and release the owner before
dropping the containing object. This makes surviving nodes unowned and
safe to reject from remove or accept for a later add. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Always use the IRQ-safe variant when acquiring the fence lock
Since dma_fence objects can be shared with other subsystems, they may be
accessed from hardirq context in those drivers, and we have to take
that into account by also using the IRQ-safe variant when acquiring
the lock.
While at it, switch to the guard model. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix folio state after ENOMEM whilst under writeback iteration
Fix the state of the current folio when ENOMEM occurs during writeback
iteration. The folio needs to be redirtied and unlocked before the
terminal writeback_iter() is invoked. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: extend conn_hash lookup critical sections
Using RCU-protected pointers outside the critical sections without
refcount is incorrect and may result to UAF.
Extend critical section to cover both hci_conn_hash lookup and use of
the returned conn.
Add surrounding rcu_read_lock() also when return value is not used, in
preparation for RCU lockdep requirement to hci_lookup_le_connect().
This avoids concurrent deletion of the conn before we are done
dereferencing it.
Also, make sure to hold hdev->lock when accessing hdev->accept_list. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Keep scheduler timeline name alive
The scheduler keeps a pointer to the timeline name, but q->name
is freed with the exec queue while scheduler fences can still
reference it.
Store the name in struct xe_guc_exec_queue so it shares
the scheduler's RCU-deferred lifetime.
(cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Take a long-lived file reference at submit
handshake_nl_accept_doit() needs the file pointer backing
req->hr_sk->sk_socket to survive the window between
handshake_req_next() and the subsequent FD_PREPARE() and get_file().
The submit-side sock_hold() does not provide that. sk_refcnt keeps
struct sock alive, but struct socket is owned by sock->file: when
the consumer fputs the last file reference, sock_release() tears
the socket down regardless of any sock_hold.
Add an hr_file pointer to struct handshake_req and acquire an
explicit reference on sock->file during handshake_req_submit().
handshake_complete() and handshake_req_cancel() release the
reference on the completion-bit-winning path.
The submit error path must also release the file reference, but
after rhashtable insertion a concurrent handshake_req_cancel() can
discover the request and race the error path. Gate the error-path
cleanup -- sk_destruct restoration, fput, and request destruction
-- with test_and_set_bit(HANDSHAKE_F_REQ_COMPLETED), the same
serialization handshake_complete() and handshake_req_cancel()
already use. When cancel has already claimed ownership, the submit
error path returns without touching the request; socket teardown
handles final destruction.
The accept-side dereferences are not yet retargeted; that change
comes in the next patch. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: qcom-cpufreq-hw: Fix possible double free
qcom_cpufreq.data is allocated with devm_kzalloc() in probe() as an
array of per-domain data. qcom_cpufreq_hw_cpu_init() stores a pointer to
one element of this array in policy->driver_data.
qcom_cpufreq_hw_cpu_exit() currently calls kfree() on policy->driver_data.
This is not valid because the memory is devm-managed. For the first
domain, this can free the devm-managed allocation while the devres entry
is still active, leading to a possible double free when the platform
device is later detached. For other domains, the pointer may refer to an
element inside the array rather than the allocation base.
Remove the kfree(data) call and let devres release qcom_cpufreq.data.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix missing locking around retry adding new subreqs
Fix netfs_retry_read_subrequests() and netfs_retry_write_stream() to take
the appropriate lock when adding extra subrequests into
stream->subrequests. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: pcm: oss: Fix setup list UAF on proc write error
snd_pcm_oss_proc_write() links a newly allocated setup entry into the
OSS setup list before duplicating the task name. If the task-name
allocation fails, the error path frees the already linked entry and
leaves setup_list pointing at freed memory.
A later OSS device open can then walk the stale list entry in
snd_pcm_oss_look_for_setup() and dereference freed memory.
Allocate the task name and initialize the setup entry before publishing
the entry on setup_list. Also fetch the initial proc read iterator only
after taking setup_mutex, so all setup_list traversal follows the same
list lifetime rules. |
