| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix soft lockup from unpadded ASCONF-ACK parameter iteration
sctp_verify_asconf() walks ASCONF-ACK parameters with
sctp_walk_params(), which advances by SCTP_PAD4(length), while the
consumer sctp_get_asconf_response() iterates the same parameters
advancing by the raw length, without padding. A single odd-length
parameter desynchronises the two walks and makes the consumer
interpret attacker-controlled bytes at a misaligned offset.
When those bytes yield a length of zero, the while loop over
asconf_ack_len makes no progress, spinning forever in softirq
context, and the watchdog reports a soft lockup. All reads stay
within the received skb, so the lockup is a pure remote denial of
service. A remote peer can trigger it with a crafted ASCONF-ACK on
an ADD-IP enabled association with an outstanding ASCONF (RFC 5061
section 4.1.2 requires the chunk to be authenticated, but the
predefined empty key id 0 allows the peer to compute the same
association HMAC from publicly exchanged parameters, so the gate
does not help).
The SCTP_PARAM_ERR_CAUSE case of sctp_verify_asconf() also performs
no length check, letting a parameter without a complete error
header reach the consumer, which reads errhdr.cause past the end of
the parameter, an out-of-bounds read.
Reject SCTP_PARAM_ERR_CAUSE parameters shorter than
sizeof(struct sctp_addip_param) + sizeof(struct sctp_errhdr) at the
verifier, and advance the consumer iterator with the same padding
rule as the verifier to keep the two walks in lockstep. The verifier
change guarantees a complete error header in every ERR_CAUSE
parameter the consumer can see, so the consumer's asconf_ack_len
check is dropped and it returns err_param->cause directly. The
consumer padding fix is still required because odd lengths remain
valid for SCTP_PARAM_ERR_CAUSE per RFC 5061.
The issue was found by ZeroHive, a vulnerability hunting agent at
Tencent Yunding Lab. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: invalidate fscache for fallocate range operations
smb3_zero_range(), smb3_punch_hole(), smb3_insert_range(), and
smb3_collapse_range() modify file contents through server-side range
operations. These operations discard the affected page cache, but leave
the FS-Cache cookie valid, so a later read may return data cached before
the range operation.
Fix this by invalidating FS-Cache after outstanding I/O has completed
and before modifying the file on the server.
Run the following as root on a CIFS mount with fsc enabled and an active
CacheFiles backend:
bash -c '
MNT=/mnt/cifs
FILE="$MNT/repro"
# Generate four 1 MiB random blocks: [A][B][C][D].
dd if=/dev/urandom of=/tmp/src bs=1M count=4 status=none
# Expected contents after zeroing B: [A][zero][C][D].
cp /tmp/src /tmp/expected
dd if=/dev/zero of=/tmp/expected bs=1M seek=1 count=1 \
conv=notrunc status=none
cp /tmp/src "$FILE"
# Populate FS-Cache, then discard the page cache.
sync
echo 1 > /proc/sys/vm/drop_caches
cat "$FILE" > /dev/null
sync
echo 1 > /proc/sys/vm/drop_caches
fallocate --zero-range -o 1M -l 1M "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Before this change, the readback differs from /tmp/expected:
readback: STALE DATA
After this change, it matches:
readback: OK |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco owned Open Source Snort 3 Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20236 are related to issues concerning incorrect calculation that are grouped under the Common Weakness Enumeration (CWE) Base CWE-682. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: fix stale page cache in insert/collapse range
smb3_insert_range() and smb3_collapse_range() use
truncate_pagecache_range() to invalidate the affected page cache.
However, if off or old_eof is not page-aligned, the boundary pages are
only partially zeroed and remain uptodate. As a result, the client may
return stale data after a successful insert/collapse range operation.
For example, with 4K pages:
page 0 page 1 page 2
0------4K 4K------8K 8K------12K
^ ^
off=2K old_eof=10K
Page 1 is removed from the page cache, while the boundary pages are
only partially zeroed. After COPYCHUNK moves the data on the server,
these cached pages may still return stale data.
This can be reproduced on a CIFS mount:
bash -c '
FILE=/mnt/scratch/repro
# Use a 6 KiB file so EOF is not page-aligned.
dd if=/dev/urandom of=/tmp/src bs=1K count=6 status=none
# Expected: a 4 KiB hole followed by the original data.
rm -f /tmp/expected
truncate -s 4K /tmp/expected
cat /tmp/src >> /tmp/expected
cp /tmp/src "$FILE"
# Prime the page cache before moving data on the server.
cat "$FILE" > /dev/null
fallocate --insert-range -o 0 -l 4K "$FILE"
if cmp -s /tmp/expected "$FILE"; then
echo "readback: OK"
else
echo "readback: STALE DATA"
fi
'
Fix this by writing back dirty data and discarding the page cache from
the start of the page containing off to EOF before moving data on the
server. |
| Trigger.dev before 4.5.6 self-hosted Docker Compose deployments using the default secrets from hosting/docker/.env.example allow authentication bypass because the hardcoded MAGIC_LINK_SECRET lets anyone forge valid magic link tokens. Unauthenticated attackers can log in as any email address, then reach Postgres, Redis, and ClickHouse with default credentials from runner containers on infrastructure networks, compromising all tenant data. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: add wcid publish check in mt76_sta_add
Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add
to avoid reinitializing the wcid->poll_list.
Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4.
According to the corruption information, prev->next was changed to itself.
wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2
wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b)
wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3)
slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192
list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040).
mt76_wcid_add_poll+0x95/0xd0 [mt76]
mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common]
mt7925_rx_check+0xa7/0xc0 [mt7925_common]
mt76_dma_rx_poll+0x50d/0x790 [mt76]
mt792x_poll_rx+0x52/0xe0 [mt792x_lib] |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: sockmap: fix tail fragment offset in bpf_msg_push_data
When bpf_msg_push_data() inserts data in the middle of a scatterlist
entry, it splits the original entry into a left fragment and a right
fragment.
The right fragment offset is page-local, but the code advances it with
`start`, which is the message-global insertion point. For inserts into a
non-first SG entry, this over-advances the offset and leaves the split
layout inconsistent.
Advance the right fragment offset by the fragment-local delta,
`start - offset`, which matches the length removed from the front of the
original entry. |
| Uncontrolled recursion in the mcpack2pb component in Apache bRPC (version < 1.18.0) on all platforms allows remote attackers to make the server crash via sending deeply nested mcpack data.
Root Cause:
The bRPC mcpack2pb parser (used to serve nshead_mcpack / ubrpc / public_pbrpc requests) recursively parses nested objects and arrays without any depth limit. For a protobuf message that references itself (e.g. a repeated message field), the generated parser recurses once per nesting level of the incoming mcpack object. A deeply nested request makes the recursion grow unbounded, overflow the stack and crash the process.
Affected Scenarios:
Use bRPC server with a recursive-schema protobuf message to serve nshead_mcpack / ubrpc / public_pbrpc requests from untrusted network.
How to Fix:
(Choose one of the following options)
1. Upgrade bRPC to version 1.18.0, which fixes this issue.
2. Apply this patch: https://github.com/apache/brpc/pull/3499
Note:
No matter which option you choose, you should know that the fix enforces the documented parsing depth limit MAX_DEPTH (128) on the parse path, the same limit the serializer already applies. If your requests contain mcpack messages nested deeper than 128 levels, the request will be failed after applying the fix. |
| Lotus through 0.10.2 contains an authorization bypass vulnerability in ChangeUserOrganizationView.post that allows authenticated users to join any organization by supplying its UUID. Self-registered attackers who know another organization's UUID can send a POST request to /app/switch_organization/ to access that tenant's data and billing configuration. |
| Backstage is an open framework for building developer portals. Prior to 2.2.4, the @backstage/plugin-techdocs-backend package is affected by improper authorization enforcement for techdocs static content. An authenticated user with access to one TechDocs documentation site could craft a URL able to read documentation belonging to a different entity. This only affects deployments using the external TechDocs builder with an external storage provider (S3, GCS, etc.) and the permission framework enabled. Instances that do not use the permission framework are unaffected, since TechDocs content is visible to all authenticated users by design. This issue is fixed in version 2.2.4. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Expressway Series software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-76491 are related to issues concerning reachable assertions that are grouped under the Common Weakness Enumeration (CWE) Base CWE-617. |
| The FluentCart A New Era of eCommerce WordPress plugin before 2.2.0 does not verify that a stored customer address selected during checkout belongs to the requester, allowing unauthenticated attackers to attach any customer's stored address to an order they place and read it back, disclosing customers' postal addresses, phone numbers and company details. |
| The Photo Engine (Media Organizer & Lightroom) WordPress plugin before 6.5.8 does not verify that a user is authorised to act on the targeted media attachment, allowing authenticated users with the author role and above to delete arbitrary media attachments, including those uploaded by other users and administrators. |
| A BIND resolver that is configured with both a "redirect" zone and "qname-minimization strict" may abort with an assertion failure while processing the redirect.
This issue affects BIND 9 versions 9.16.0 through 9.18.50, 9.20.0 through 9.20.29, 9.21.0 through 9.21.26, 9.16.8-S1 through 9.18.50-S1, and 9.20.9-S1 through 9.20.29-S1. |
| As part of Cisco's ongoing commitment to proactive security and product quality, Cisco has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities. The vulnerabilities tracked by CVE-2026-76530 are related to use of non-canonical URL paths for authorization decisions and are grouped under the Common Weakness Enumeration (CWE) CWE-647. |
| Authorization Bypass Through User-Controlled Key vulnerability in myCred myCred mycred allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects myCred: from n/a through 4.0.0-beta.1. |
| Authorization Bypass Through User-Controlled Key vulnerability in H5P H5P h5p allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects H5P: from n/a through 1.17.9. |
| The Appointment Booking Plugin WordPress plugin before 5.7.5 does not verify that an authenticated agent-level user is assigned to a customer before returning or searching that customer's record, allowing any agent to read and enumerate the personal information of every customer on the site, including those managed by other agents. |
| QloApps through 1.7.0 contains an insecure direct object reference vulnerability in OrderDetailController::displayAjaxSubmitRefundRequest() that allows authenticated customers to submit refunds for other customers' service lines. Attackers can submit foreign id_service_product_order_detail values with their own id_order to create refund records, cancel victims' service lines, and corrupt refund quantities. |
| Bytebase before 3.16.0 contains an authorization bypass vulnerability in GetTaskRunLog, GetTaskRunSession and PreviewTaskRunRollback that allows authenticated users to access other projects' task runs by UID. Attackers with permission on one project can supply foreign task or task run UIDs to read execution logs, database session details, and rollback SQL from other projects. |
