Export limit exceeded: 417722 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (107873 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90153 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound smb_check_perm_dacl() ACE walks by DACL size smb_check_perm_dacl() validates that the DACL fits inside the NT security descriptor, but then bounds its two ACE walks by the remaining NTSD length (acl_size) rather than the DACL's declared size (pdacl_size). When pdacl->size is smaller than the trailing NTSD buffer, bytes after the declared DACL boundary - still inside the stored security descriptor - are parsed as ACEs during access checks. A crafted DACL can place an access-granting ACE beyond pdacl->size, and the current code accepts it during SMB2_CREATE access validation, while parse_dacl() and smb_inherit_dacl() stop at pdacl_size. Bound both ACE walks by pdacl_size to match the DACL boundary semantics used elsewhere in the server. Validation: - semantic KUnit harness shows the post-boundary ACE is selected before the fix and rejected (EACCES) after it - linux master (7.2-rc6), x86_64 | ||||
| CVE-2026-90149 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: fix NULL dereference for NFSv4.0 data servers flexfiles accepts NFSv4.0 data servers, but two NFSv4 code paths assume the data server client has a session. Unlike NFSv4.1+, an NFSv4.0 client has no session (clp->cl_session is NULL; it uses clp->cl_slot_tbl), so I/O to a v4.0 flexfiles DS oopses: - nfs4_init_ds_session() dereferences clp->cl_session->session_state while seeding the DS lease. It also only seeds cl_lease_time when NFS4_SESSION_INITING is set; without a session that never happens, so cl_lease_time stays 0 and nfs4_renew_state() busy-loops, requeuing every 5 seconds. Seed the lease whenever there is no session and return before touching session state. - ff_layout_async_handle_error_v4() dereferences clp->cl_session->fc_slot_table on every DS I/O error. Fall back to the v4.0 transport slot table (clp->cl_slot_tbl) when there is no session. | ||||
| CVE-2026-90146 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, xdp: move offload check into dev_xdp_install() bpf_xdp_link_update() calls dev_xdp_install() directly and skips dev_xdp_attach(), so the checks in dev_xdp_attach() do not run. A user can make an XDP link with a normal program and then swap in an offloaded or device-bound program with BPF_LINK_UPDATE, which puts it on the software path. dev_xdp_install() is the one place all three paths go through: "ip link set xdp" and BPF_LINK_CREATE reach it via dev_xdp_attach(), and BPF_LINK_UPDATE calls it directly. So move the program checks (offloaded, bound to another device, device-bound in generic mode, native vs generic, DEVMAP and CPUMAP) there, and keep only the netlink-flag check (XDP_FLAGS_UPDATE_IF_NOEXIST) in dev_xdp_attach(). | ||||
| CVE-2026-90111 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6mr: do not clone dst in ip6mr_cache_report() IPv6 input attaches a non-refcounted (NOREF) dst to skbs under RCU. When an ingress multicast packet misses MFC lookup, ip6mr_cache_unresolved() places the skb onto the unresolved queue, escaping the receive-side RCU grace period. If the underlying route is deleted and freed, and the MFC queue is later resolved with a wrong parent interface, ip6_mr_forward() invokes ip6mr_cache_report(..., MRT6MSG_WRONGMIF), which executes dst_clone(skb_dst(pkt)) on the freed dst entry, triggering a slab use-after-free. Report packets queued to mroute6_sk (a raw socket) and netlink notifications do not require an attached dst entry. Fix this by: 1. Removing dst_clone() in ip6mr_cache_report() and ensuring report skbs do not hold a dst. 2. Dropping skb_dst before queuing unresolved skbs in ip6mr_cache_unresolved(), matching the fact that multicast forwarding resolves outgoing routes anew via ip6_route_output(). | ||||
| CVE-2026-90093 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: access chan->conn safely in get/setsockopt Since commit b66774b48dd9 ("Bluetooth: L2CAP: Fix UAF in channel timeout by holding conn ref") l2cap_chan::conn has held reference and remains non-NULL also after the corresponding hci_conn is deleted. In this state accessing various fields eg. hci_conn::hdev is invalid, which leads to KASAN crash in l2cap_sock_setsockopt() access of conn->hcon->hdev. Check l2cap_chan::conn.hcon corresponds to an alive hci_conn before trying to use it in l2cap_sock.c. Hold l2cap_chan_lock() in getsockopt/setsockopt to ensure it stays alive, and to avoid data races in l2cap_chan fields. | ||||
| CVE-2026-90045 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: ffs: fix mm lifetime handling io_data stores a pointer to the submitting task's mm_struct, but does not currently hold a reference to it while async requests are pending. This can result in a use-after-free if the task exits before completion handling finishes. Take a reference with mmgrab() when queuing the read request and release it with mmdrop() on request completion. | ||||
| CVE-2026-90044 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix Use-After-Free in AIO error path In ffs_epfile_write_iter() and ffs_epfile_read_iter(), when ffs_epfile_io() fails with an error other than -EIOCBQUEUED, the io_data structure (`p`) is freed. However, for AIO operations, the kiocb cancel function was already armed and kiocb->private was set to `p`. If a concurrent cancel operation (such as sys_io_cancel()) executes after ffs_epfile_io() fails but before the function frees `p`, a Use-After-Free can occur when the cancellation handler accesses the freed pointer. To securely fix this race condition, we must properly un-arm the cancellation. Invoking `kiocb->ki_complete()` does exactly this by acquiring `ctx->ctx_lock` and safely removing the kiocb from the active sequence. In doing so, it ensures that a parallel io_cancel can no longer discover the kiocb, effectively closing the race window. We then return -EIOCBQUEUED to notify the VFS layer that the kiocb has been consumed and it should avoid attempting to complete the request again or triggering subsequent completion handlers. | ||||
| CVE-2026-90041 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: sony: clean up device list on probe failure sony_input_configured() adds some controllers to sony_device_list before HID core registers their input devices. input_register_device() can fail after the callback returns successfully. sony_probe() then observes that HID_CLAIMED_INPUT is clear and unwinds, but only stops the HID hardware. The devres-managed sony_sc is freed while its list node remains linked, so the next matching controller traverses freed memory. Initialize the list node and device ID to inactive states. Make list removal idempotent and run the driver-private cleanup on every probe failure path. This also makes a second cleanup safe when sony_input_configured() already unwound a partial initialization before sony_probe() handles the missing input claim. Found by 0sec (https://0sec.ai) using automated source analysis; verified against the HID input registration and probe unwind paths. | ||||
| CVE-2026-90016 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in rtw_restruct_wmm_ie() rtw_restruct_wmm_ie() scans in_ie for a WMM IE with: while (i < in_len) { ... if (i + 5 < in_len && in_ie[i] == 0xDD && ...) { ... break; } i += (in_ie[i + 1] + 2); /* to the next IE element */ } When the "i + 5 < in_len" match check fails simply because i is within 5 bytes of the end of the buffer (i.e. no WMM IE was found near the tail of in_ie), execution falls through to "i += (in_ie[i + 1] + 2)", which reads in_ie[i + 1]. If i == in_len - 1 at that point, this is a 1-byte out-of-bounds read of an attacker-influenced IE buffer built from association/scan data. Commit a75281626fc8f ("staging: rtl8723bs: fix potential out-of-bounds read in rtw_restruct_wmm_ie") added the "i + 5 < in_len" guard to the match condition itself, but did not add an equivalent guard before the fallthrough advance, so the same class of OOB read remained reachable through the non-matching path. Add an explicit bounds check before advancing to the next IE. | ||||
| CVE-2026-90013 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Take trace_array reference when opening options file The options files do not take the trace_array reference for the options they represent. This could cause a use-after-free kernel crash if one of these files is opened by one task and another task removes the instance that the option is for. Because it doesn't take a reference upon opening, it will not stop the removal which will free the options descriptor that is being used. As the options are somewhat dynamic in their creation at boot up, each file represents a flag in the trace_array. The trace_array has an array of indexes to represent each of these flags that is stored in the trace_flags_index array. The address of the index array element is used to pass to the inode->i_private pointer. Then that element is read which holds the index (which represents the flag) and then the index is used to calculate the trace_array descriptor from its trace_flags_index array. One issue is that the index element can not be referenced until the trace_array's reference is taken. To handle this, create a new helper function called: trace_array_options_get() that will iterate all the existing trace_arrays in the ftrace_trace_arrays list (under the trace_types_lock), and compare the passed in address of the index element with the entire array of the trace_array's trace_flags_index array. If it matches, then up the corresponding trace_array's reference and return. | ||||
| CVE-2026-90002 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ftrace: Take trace_array reference before accessing its ftrace_ops The trace instance files set_ftrace_filter and set_ftrace_notrace was updated to work with specific trace instances (trace_arrays). The issue is that when these files are opened, there is a small race window where it will use the ftrace_ops from the inode->private pointer to get a reference to the trace_array and then take its reference. The problem is that the ftrace_ops itself could be freed. If the rmdir on the instance happens at the same time the set_ftrace_filter file is opened, the rmdir could have also freed the ftrace_ops and referencing it will cause a use-after-free bug and crash the kernel. Instead, pass in the trace_array as the file private data (NULL for the top level instance), and then pass both the trace_array and the ftrace_ops to the ftrace_regex_open() function. If the trace_array is NULL, then it just uses the ftrace_ops without the need to take its reference (like normal). If the ftrace_ops is NULL, that is only the case for the top level instance and the global_ops can be used. This allows the trace_array to have its reference incremented before touching the ftrace_ops that could also be freed when the instance is. | ||||
| CVE-2026-89995 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dma-direct: return struct page from dma_direct_alloc_from_pool() Commit 5b138c534fda ("dma-direct: factor out a dma_direct_alloc_from_pool helper") changed dma_direct_alloc_from_pool() to return the CPU address from dma_alloc_from_pool(). That fits dma_direct_alloc(), but dma_direct_alloc_pages() also uses the helper and expects a struct page *. Fix this by making dma_direct_alloc_from_pool() return the struct page * again, and pass the CPU address back through an out-parameter for the dma_direct_alloc() caller. | ||||
| CVE-2026-89988 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: kprobes: Protect kprobe_blacklist with RCU __within_kprobe_blacklist() traverses kprobe_blacklist without holding kprobe_mutex. When a module is unloaded, kprobe_remove_area_blacklist() removes blacklist entries and immediately frees them with kfree(). A concurrent call to within_kprobe_blacklist() can therefore dereference freed memory. Furthermore, within_kprobe_blacklist() can be called in atomic or non-preemptible contexts where the sleeping kprobe_mutex cannot be taken. Protect kprobe_blacklist with RCU. Use guard(rcu)() and list_for_each_entry_rcu() for traversal, list_add_tail_rcu() for insertions, list_del_rcu() for deletions, and kfree_rcu() to reclaim entries safely after a grace period. | ||||
| CVE-2026-89980 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: harmony: initialize locks before requesting IRQ snd_harmony_create() registers the IRQ before initializing h->lock and h->mixer_lock. A pending interrupt can invoke the handler while these locks are uninitialized. Initialize both locks before requesting the IRQ so the handler always sees valid lock state. | ||||
| CVE-2026-89960 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio-ap: fix stale pqap_hook pointer on error in vfio_ap_mdev_set_kvm() In vfio_ap_mdev_set_kvm(), kvm->arch.crypto.pqap_hook is set to &matrix_mdev->pqap_hook before the update locks are acquired and the mdev list is checked for a conflicting assignment. If another mdev is already attached to the same KVM instance, the function returns -EPERM without restoring the hook pointer, leaving kvm->arch.crypto.pqap_hook pointing at the failing matrix_mdev instead of the mdev that legitimately owns the KVM. Since matrix_mdev->kvm is never set on this error path, vfio_ap_mdev_unset_kvm() will not clean up the hook when matrix_mdev is later closed. If matrix_mdev is subsequently freed, any PQAP instruction executed by the guest will dereference the stale pointer through pqap_hook_rwsem, resulting in a use-after-free. Since kvm->arch.crypto.pqap_hook is only set in the vfio_ap_mdev_set_kvm() function and is cleared in the vfio_ap_mdev_unset_kvm() function, a check for 'kvm->arch.crypto.pqap_hook != NULL' is all that is needed to determine whether it belongs to another mdev. This will alleviate the need to iterate the matrix_dev->mdev_list list to see if the kvm object is assigned to another mdev.This was introduced in v3 to alleviate the need to take the mdevs_lock while iterating the list; however, this did not prevent a potential race condition. The pqap_hook_rwsem(write) is now performed inside get_update_locks_for_kvm(), which is updated to acquire pqap_hook_rwsem(write) between kvm->lock and mdevs_lock. This ordering is consistent with the PQAP intercept path, which acquires pqap_hook_rwsem in read mode while srcu is held under vcpu->mutex, establishing the dependency: kvm->lock -> vcpu->mutex -> srcu -> pqap_hook_rwsem(read). The pqap_hook_rwsem is now released inside the release_update_locks_for_kvm(), which is updated to release pqap_hook_rwsem(write) between mdevs_lock and kvm->lock. Additionally, kvm_put_kvm() in vfio_ap_mdev_unset_kvm() is moved after release_update_locks_for_kvm(). Previously it was called while kvm->lock was held; if it were ever the last reference, kvm_destroy_vm() would run under kvm->lock, which would deadlock. | ||||
| CVE-2026-89920 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: Fix memory corruption by not reinjecting CK machine checks Channel-subsystem damage machine checks are for the host channel subsystem. The guest channel subsystem is emulated in the userspace VMM. There is no point in forwarding such machine checks into the guest. This also simplifies the machine check reinjection and avoids kfree of a stack variable as reported by sashiko. There might be still machine checks that have the ck bit set with another bit (like instruction damage), mask out the CK bit in s390_backup_mcck_info(), like the CP and ED bits already are. | ||||
| CVE-2026-89912 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: arm64: vgic-its: Don't dereference a NULL collection on ITT save MAPC with V=0 drops ite->collection but leaves the ITE on the device's ITT list, and vgic_its_save_ite() dereferences it unconditionally. A guest that issues MAPD, MAPTI and then MAPC(V=0) therefore oopses the host when the VMM issues KVM_DEV_ARM_ITS_SAVE_TABLES to migrate it. That sequence is UNPREDICTABLE per the architecture, but KVM already handles the resulting state in the translate, MOVI and DISCARD paths. Save a zeroed entry, which vgic_its_restore_ite() reads back as invalid. Skipping the ITE instead would leave the ITT slot holding whatever is in guest memory, and restore rejects an entry naming a collection the restored collection table does not have. | ||||
| CVE-2026-89877 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: media: saa7164: fix cleanup on resource allocation failure saa7164_dev_setup() adds the device to the global saa7164_devlist before requesting the PCI BAR memory regions. If get_resources() fails, saa7164_dev_setup() decrements the device count and returns an error, but leaves the device on saa7164_devlist. The probe error path then frees the device, leaving a dangling entry on the global list. Reuse the existing MMIO mapping error path to remove the device from saa7164_devlist and decrement the device count before returning. Also release BAR0 if it was successfully requested but the BAR2 request fails. | ||||
| CVE-2026-89870 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: zoran: Avoid freeing a registered video_device twice zoran_init_video_device() installs zoran_vdev_release() as the video_device release callback through zoran_template. After video_register_device() succeeds, video_unregister_device() drops the registered video_device reference and the V4L2 core eventually invokes that release callback, which kfree()s the video_device. zoran_exit_video_devices() called video_unregister_device() and then kfree(zr->video_dev), so device teardown could free the same video_device twice. Remove the direct kfree() and clear the cached pointer after unregistering. The pre-registration failure path keeps its manual free because the video_device was not registered there. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-89860 | 1 Linux | 1 Linux Kernel | 2026-10-30 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Initialize NVMe abort_work once at submission qla_nvme_fcp_abort() and qla_nvme_ls_abort() ran INIT_WORK() on priv->abort_work immediately before schedule_work(). INIT_WORK() reinitializes the work_struct, resetting its list head and clearing the pending bit. If an abort is issued more than once for the same command (for example, concurrent transport teardown and a timeout-driven abort), the second INIT_WORK() reinitializes a work item that is already queued, which can corrupt the workqueue list and lead to crashes or a looping worker. Initialize priv->abort_work once at command submission, next to the existing per-command spin_lock_init(&priv->cmd_lock), and leave only schedule_work() in the abort paths. schedule_work() already does nothing when the work item is still pending, so a repeated abort no longer disturbs an in-flight work item. The command is not returned to the transport until the final kref_put()/release callback runs after abort_work has completed, so the work item is idle before priv is reused and the single submission-time INIT_WORK() is safe. | ||||