| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Pillow is a Python imaging library. From 8.2.0 through 12.2.0, src/libImaging/Jpeg2KDecode.c accumulates total_component_width across every tile in a JPEG2000 image instead of recomputing it per tile, allowing a crafted tiled JPEG2000 file to force substantially higher transient memory usage and trigger out-of-memory failures during decoding. This issue is fixed in version 12.3.0. |
| Network-AI is a TypeScript/Node.js multi-agent orchestrator. Prior to version 5.9.1, the agent sandbox gates shell commands behind an allowlist (`SandboxPolicy.isCommandAllowed`), which THREAT_MODEL.md calls the main control against a compromised agent (Adversary 3.2). The allowlist glob-matches the whole command string, but `ShellExecutor` runs that string through `/bin/sh -c`. So any wildcard allow such as `git *`, `npm *` or `node *` also matches `git status; <anything>`, and a scoped command becomes arbitrary execution. The issue is fixed in v5.9.1. `ShellExecutor` now executes via `spawn(file, args, { shell: false })` using a quote-aware parsed argv, so no shell is invoked. `SandboxPolicy.isCommandAllowed` and the new `SandboxPolicy.tokenizeCommand` reject any unquoted shell metacharacter (`; & | $ ` ` ` ( ) < > { }` newline) or unterminated quote before the allowlist glob match; quoted metacharacters are preserved as literal argument data. Users should upgrade to `network-ai@5.9.1` or later. As defense in depth, avoid broad wildcard allowlist entries such as `node *` / `npm *` which are direct code execution by design. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling
The WebUSB GET_URL handler in composite_setup() narrows
landing_page_length to fit the host-supplied wLength using
landing_page_length = w_length
- WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
unsigned subtraction wraps, and the subsequent
memcpy(url_descriptor->URL,
cdev->landing_page + landing_page_offset,
landing_page_length - landing_page_offset);
ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).
A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.
Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied. Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values. |
| In egroupware version 26.0 and earlier, an authenticated administrator can achieve OS-level Remote Code Execution (RCE) by uploading a malicious eTemplate XML file (`.xet`) to the VFS `/etemplates` mount. The `Widget::expand_name()` method passes template widget attribute values directly into a PHP `eval()` call with only double-quote escaping applied - **backtick characters are not escaped**. In PHP, backticks inside a double-quoted `eval()` string execute shell commands. This allows an admin-level user to escalate from web application access to arbitrary OS command execution on the server. |
| systeminformation is a System and OS information library for node.js. Prior to 5.31.7, networkInterfaces() on Linux is vulnerable to OS command injection through the Debian/Ubuntu interfaces(5) source directive because lib/network.js checkLinuxDCHPInterfaces() reads /etc/network/interfaces, extracts a source <path> token from file content, and interpolates it unquoted into cat ${file} 2> /dev/null | grep 'iface\|source' executed by execSync(cmd, util.execOptsLinux), allowing a path containing shell metacharacters to execute commands in any process that calls networkInterfaces(), including via getStaticData() and getAllData(). This issue is fixed in version 5.31.7. |
| Windows Routing and Remote Access Service (RRAS) Remote Code Execution Vulnerability |
| A security flaw has been discovered in davenardella snap7 up to 1.4.3. The impacted element is the function TSnap7Peer::NegotiatePDULength of the file src/core/s7_peer.cpp. The manipulation of the argument PDULength results in out-of-bounds write. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. |
| IBM Engineering AI Hub 1.0.0, 1.1.0, and 1.2.0 could allow a remote attacker to execute arbitrary script code due to improper neutralization of input during web page generation. |
| An high privileged remote attacker can exploit an authenticated OS command injection vulnerability in the system_certificates view due to improper neutralization of special elements in an OS command. This can result in a total loss of confidentiality, availability and integrity. |
| A flaw has been found in Shibby Tomato 1.28 RT-N5x MIPSR2 Build 124. Affected by this issue is the function setup_conntrack of the file /sbin/rc. Executing a manipulation of the argument ct_tcp_timeout can lead to out-of-bounds write. The attack may be performed from remote. This project is superseded by FreshTomato. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/mmcid: Fix OOB clear_bit when CID is MM_CID_UNSET in fixup path
In mm_cid_fixup_cpus_to_tasks(), when rq->curr has the target mm and
mm_cid.active is set, the CID is checked with cid_in_transit() before
setting the transition bit. In per-CPU mode a newly forked or exec'd
task can be running with mm_cid.cid == MM_CID_UNSET because CIDs are
assigned lazily on schedule-in. With cid_in_transit() the guard passes
for MM_CID_UNSET (no transit bit), converts it to MM_CID_UNSET |
MM_CID_TRANSIT and stores it back; later mm_cid_schedout() feeds this
to clear_bit() with MM_CID_UNSET as the bit number, triggering an
out-of-bounds write.
Symptoms: this is genuine memory corruption, but a bounded out-of-bounds
write, not an arbitrary one. MM_CID_UNSET is the fixed sentinel BIT(31),
so once the bad value reaches mm_cid_schedout() the cid_from_transit_cid()
strip leaves MM_CID_UNSET, which fails the "cid < max_cids" convergence
test and falls into mm_drop_cid() -> clear_bit(MM_CID_UNSET,
mm_cidmask(mm)). The cid bitmap is embedded in the mm_struct slab object
(after cpu_bitmap and mm_cpus_allowed) and is only num_possible_cpus()
bits wide, so clearing bit 31 is a deterministic OOB bit-clear at a
fixed offset of 2^31 / 8 == 256 MiB past the bitmap base. The address is
not attacker-influenced (fixed sentinel -> fixed offset) and the op only
clears a single bit; what sits 256 MiB further along the direct map is
whatever kernel object happens to live there, so this corrupts one bit of
unpredictable kernel memory -- it is not an arbitrary-address or
arbitrary-value write.
It triggers only in per-CPU CID mode, when a CPU is running an active
task of the target mm whose cid is still MM_CID_UNSET -- the
fork()/execve() window before that task's next schedule-in assigns it a
real CID -- and a per-CPU -> per-task fixup walks over it (the mode
fallback driven by a thread exit, sched_mm_cid_exit(), or by the deferred
max_cids recompute in mm_cid_work_fn()).
In practice syzkaller surfaced it as a KASAN use-after-free reported in
__schedule -> mm_cid_switch_to, where the offending clear_bit() is inlined
via mm_cid_schedout() -> mm_drop_cid().
Guard the transition-bit assignment against MM_CID_UNSET, in addition to
the existing cid_in_transit() check, so the bit is only set on a genuine
task-owned CID. A CPU-owned (MM_CID_ONCPU) CID of a running active task
is handled by the cid_on_cpu(pcp->cid) branch above and never reaches
this path, so excluding MM_CID_UNSET (and the already-transitioning case)
is sufficient. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: veml6075: add bounds check to veml6075_it_ms index
veml6075_it_ms has 5 elements but VEML6075_CONF_IT can yield values 0-7.
If it returns a value >= 5, this causes an out-of-bounds array access.
Add a bounds check and return -EINVAL if the index is out of range.
The problem values are reserved so should never be read from the
register. Hence this is hardening against fault device, missprogramming
or bus corruption. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: adc: ti-ads1298: add bounds check to pga_settings index
ads1298_pga_settings has 7 elements but ADS1298_MASK_CH_PGA can yield
values 0-7. If it yields a value >= 7, this causes an out-of-bounds
array access. Add a bounds check and return -EINVAL if the index
is out of range.
Note that the remaining value b111 is reserved so should not be seen
in a correctly functioning system. |
| In the Linux kernel, the following vulnerability has been resolved:
media: rzv2h-ivc: Fix concurrent buffer list access
The list of buffers (`rzv2h_ivc::buffers.queue`) is protected by a
spinlock (`rzv2h_ivc::buffers.lock`). However, in
`rzv2h_ivc_transfer_buffer()`, which runs in a separate workqueue, the
`list_del()` call is executed without holding the spinlock, which makes
it possible for the list to be concurrently modified
Fix that by removing a buffer from the list in the lock protected section.
[assign ivc->buffers.curr in critical section as reported by Barnabas] |
| IBM Langflow OSS 1.0.0 through 1.10.1 Langflow could allow an authenticated user to execute arbitrary commands with elevated privileges on the system due to improper validation of user supplied input in the Python Interpreter component. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: rsnd: Fix potential out-of-bounds access of component_dais[]
component_dais[RSND_MAX_COMPONENT] is initially zero-initialized
and later populated in rsnd_dai_of_node(). However, the existing boundary check:
if (i >= RSND_MAX_COMPONENT)
does not guarantee that the last valid element remains zero. As a result,
the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero,
which may lead to an out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| NocoBase is an AI-powered no-code/low-code platform for building business applications and enterprise solutions. Prior to 2.1.19, NocoBase @nocobase/plugin-backups restored PostgreSQL backups by interpolating the database.schema value from _metadata.json into shell command strings executed with Node.js child_process.exec(), allowing a backup-management user restoring a crafted backup to execute commands as the NocoBase server process. This vulnerability is fixed in 2.1.19. |
| Wekan is open source kanban built with Meteor. Prior to 9.07, Wekan avatar upload functionality embeds user-supplied filenames into paths later passed to child_process.exec() for MIME-type detection. Because models/avatars.js and models/fileValidation.js used a shell command with the avatar filename, shell metacharacters such as backticks and $() in the filename could execute commands on the server. This issue is fixed in version 9.07. |
| h2o is an HTTP server with support for HTTP/1.x, HTTP/2 and HTTP/3. Prior to commit 6b5370d, h2o is vulnerable to a Denial of Service attack when calling alloca under certain conditions. When serving static files, h2o builds the file path on stack, by calling alloca. The maximum size of the memory allocated using alloca can be as huge as ~600KB, which exceeds the default pthread stack size used by musl libc (128KB). If the amount of memory allocated by alloca exceeds the stack size, the h2o server crashes with a segmentation fault, while it tries to touch the guard page. This issue has been fixed by commit 6b5370d. |
| AVideo through 29.0 contains an OS command injection vulnerability in the ffmpeg.json.php endpoint where notifyCode and callback parameters are concatenated into a shell command without escaping. Attackers who can craft a valid encrypted payload can inject arbitrary shell metacharacters into these fields to execute OS commands as the web-server user. |
