| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: handle NULL b_addr in xfs_buf_free
When xfs_buf_alloc_backing_mem() fails, xfs_buf_free() is called with
bp->b_addr still NULL. The code falls through to the folio_put path
which calls virt_to_folio(NULL), dereferencing an invalid address and
causing a kernel crash.
Call Trace:
xfs_buf_free+0x25f/0x510
xfs_buf_alloc+0xc98/0x19b0
xfs_buf_find_insert+0x55/0x14d0
xfs_buf_get_map+0x122b/0x17c0
xfbtree_init_leaf_block+0x11c/0x4a0
xfbtree_init+0x1bb/0x460
xrep_rmap_setup_scan+0x100/0x1f0
xrep_rmapbt+0x41/0xc0
Fix this by skipping folio_put() when bp->b_addr is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Handle partially initialized auxiliary devices
bnxt_aux_devices_init() calls auxiliary_device_init() before all fields
used by bnxt_aux_dev_release() are initialized. After
auxiliary_device_init() succeeds, later errors must unwind with
auxiliary_device_uninit(), which invokes the release callback.
The release callback assumes that aux_priv->id, aux_priv->edev,
edev->net and edev->ulp_tbl are all populated. If allocation fails
after auxiliary_device_init(), the release path can otherwise dereference
or clear partially initialized state.
Allocate and attach the bnxt_en_dev and ULP table before calling
auxiliary_device_init(), so the release callback only sees a fully
initialized auxiliary private object. If auxiliary_device_init() itself
fails, free those allocations directly because device_initialize() has not
run and the release callback will not be invoked.
This issue was found by a static analysis checker and confirmed by manual
source review. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix max_vport related crash on allocation error during init
Set adapter->max_vports only after successful allocation of vports, netdevs
and vport_config buffers. This fixes possible crashes on reset or rmmod,
following failed allocation on init
[ 305.981402] idpf 0000:83:00.0: enabling device (0100 -> 0102)
[ 305.994464] idpf 0000:83:00.0: Device HW Reset initiated
[ 320.416872] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 320.416918] #PF: supervisor read access in kernel mode
[ 320.416942] #PF: error_code(0x0000) - not-present page
[ 320.416963] PGD 2099657067 P4D 0
[ 320.416983] Oops: Oops: 0000 [#1] SMP NOPTI
...
[ 320.417093] RIP: 0010:idpf_remove+0x118/0x200 [idpf]
[ 320.417130] Code: 8b bb 98 09 00 00 e8 17 0f 5b e5 48 8b bb e8 08 00 00 e8 0b 0f 5b e5 66 83 bb 28 06 00 00 00 48 8b bb 20 06 00 00 74 49 31 ed <48> 8b 04 ef 48 85 c0 74 2f 48 8b 78 20 e8 66 58 91 e5 48 8b 83 20
[ 320.417183] RSP: 0018:ff7322212903fdb8 EFLAGS: 00010246
[ 320.417205] RAX: 0000000000000000 RBX: ff4463de40300000 RCX: ff7322212903fd4c
[ 320.417228] RDX: 0000000000000001 RSI: ffffffffa7f7d100 RDI: 0000000000000000
[ 320.417250] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[ 320.417272] R10: 0000000000000001 R11: ff4463de3a638f58 R12: ff4463be89ac7000
[ 320.417294] R13: ff4463be89ac7198 R14: ff4463be94fc7198 R15: ffffffffc0f10f20
[ 320.417317] FS: 00007f963c0e6740(0000) GS:ff4463fdd65d8000(0000) knlGS:0000000000000000
[ 320.417342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 320.417362] CR2: 0000000000000000 CR3: 00000020ba674002 CR4: 0000000000773ef0
[ 320.417385] PKRU: 55555554
[ 320.417398] Call Trace:
[ 320.417412] <TASK>
[ 320.417429] pci_device_remove+0x42/0xb0
[ 320.417459] device_release_driver_internal+0x1a9/0x210
[ 320.417492] driver_detach+0x4b/0x90
[ 320.417516] bus_remove_driver+0x70/0x100
[ 320.417539] pci_unregister_driver+0x2e/0xb0
[ 320.417564] __do_sys_delete_module.constprop.0+0x190/0x2f0
[ 320.417592] ? kmem_cache_free+0x31e/0x550
[ 320.417619] ? lockdep_hardirqs_on_prepare+0xde/0x190
[ 320.417644] ? do_syscall_64+0x38/0x6b0
[ 320.417665] do_syscall_64+0xc8/0x6b0
[ 320.417683] ? clear_bhb_loop+0x30/0x80
[ 320.417706] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 320.417727] RIP: 0033:0x7f963bb30beb |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix kernel panic during driver load failure
Avoid kernel panic if MES init fails during driver load. The KIQ ring is
falsely marked as ready as ASICs that use MES, KIQ is owned by MES.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu]
Call Trace:
gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu]
amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu]
amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu]
amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu]
amdgpu_gart_unbind+0x72/0x90 [amdgpu]
amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu]
amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu]
amdttm_tt_unpopulate+0x29/0x70 [amdttm]
ttm_bo_put+0x1eb/0x360 [amdttm]
amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu]
amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu]
amdgpu_irq_fini_hw+0x58/0x80 [amdgpu]
amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu]
amdgpu_driver_load_kms+0x60/0xa0 [amdgpu]
amdgpu_pci_probe+0x28e/0x6d0 [amdgpu]
pci_device_probe+0x19f/0x220
really_probe+0x1ed/0x340
driver_probe_device+0x1e/0x80
__driver_attach+0xd3/0x1a0
bus_for_each_dev+0x68/0xa0
bus_add_driver+0x19f/0x270
driver_register+0x5d/0xf0
do_one_initcall+0xac/0x200
do_init_module+0x1ec/0x280
__se_sys_finit_module+0x2de/0x310
do_syscall_64+0x6a/0x250
entry_SYSCALL_64_after_hwframe+0x4b/0x53
(cherry picked from commit 4623b958dd6da0f4c3026afdf330626a09ecb0f0) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: allocate hook ops while under mutex
arp/ip(6)t_register_table() add the table to the per-netns list via
xt_register_table() before allocating the per-netns hook ops copy
via kmemdup_array(). This leaves a window where the table is
visible in the list with ops=NULL.
If the pernet exit happens runs concurrently the pre_exit callback finds
the table via xt_find_table() and passes the NULL ops pointer to
nf_unregister_net_hooks(), causing a NULL dereference:
general protection fault in nf_unregister_net_hooks+0xbc/0x150
RIP: nf_unregister_net_hooks (net/netfilter/core.c:613)
Call Trace:
ipt_unregister_table_pre_exit
iptable_mangle_net_pre_exit
ops_pre_exit_list
cleanup_net
Fix by moving the ops allocation into the xtables core so the table is
never in the list without valid ops. Also ensure the table is no longer
processing packets before its torn down on error unwind.
nf_register_net_hooks might have published at least one hook; call
synchronize_rcu() if there was an error.
audit log register message gets deferred until all operations have
passed, this avoids need to emit another ureg message in case of
error unwinding.
Based on earlier patch by Tristan Madani. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: read COW data with the original inode during atomic write
When updating an atomic-write file, f2fs_write_begin() may read the
previously written data back from the COW inode:
prepare_atomic_write_begin() locates the block in the COW inode and sets
use_cow, and the read bio is then built with the COW inode:
f2fs_submit_page_read(use_cow ? F2FS_I(inode)->cow_inode : inode,
...);
and f2fs_grab_read_bio() decides whether to schedule fs-layer decryption
(STEP_DECRYPT) for the bio based on that inode via
fscrypt_inode_uses_fs_layer_crypto().
However, the folio being filled belongs to the original inode
(folio->mapping->host == inode), and the data stored in the COW block was
encrypted (or left as plaintext) using the original inode's context, not
the COW inode's -- see f2fs_encrypt_one_page(), which keys off
fio->page->mapping->host. fscrypt_decrypt_pagecache_blocks() likewise
operates on folio->mapping->host.
The COW inode is created as a tmpfile in the parent directory and inherits
its encryption policy from there. With test_dummy_encryption the newly
created COW inode gets the dummy policy and becomes encrypted, while a
pre-existing regular file -- created before the policy applied, e.g.
already present in the on-disk image -- stays unencrypted. The read
path then sets STEP_DECRYPT based on the encrypted COW inode and calls
fscrypt_decrypt_pagecache_blocks() on a folio whose host (the unencrypted
original inode) has a NULL ->i_crypt_info, dereferencing it:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
RIP: 0010:fscrypt_decrypt_pagecache_blocks+0xa0/0x310
Workqueue: f2fs_post_read_wq f2fs_post_read_work
Call Trace:
fscrypt_decrypt_bio+0x1eb/0x340
f2fs_post_read_work+0xba/0x140
process_one_work+0x91c/0x1a40
worker_thread+0x677/0xe90
kthread+0x2bc/0x3a0
The COW inode is only needed to locate the on-disk block, and that block
address is already resolved into @blkaddr by prepare_atomic_write_begin()
via __find_data_block(cow_inode, ...); f2fs_submit_page_read() then reads
from that physical @blkaddr directly, so the inode argument only selects
the post-read crypto context, not which block is fetched. Reading with
@inode therefore returns the same (latest, not-yet-committed) COW data,
while making both the fs-layer decryption decision and the inline crypto
path use the correct (original inode's) key.
With the COW inode no longer used at the read site, the use_cow flag has no
remaining consumer; drop it from f2fs_write_begin() and
prepare_atomic_write_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
iio: frequency: admv1013: fix NULL pointer dereference on str
When device_property_read_string() fails, str is left uninitialized
but the code falls through to strcmp(str, ...), dereferencing a garbage
pointer. Replace manual read/strcmp with
device_property_match_property_string() and consolidate the SE mode
enums into a single sequential enum, mapping to hardware register
values via a switch consistent with other bitfields in the driver.
Several cleanup patches have been applied to this driver recently so
this will need a manual backport. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix dc_link NULL handling in HPD init
amdgpu_dm_hpd_init() may see connectors without a valid dc_link.
The code already checks dc_link for the polling decision, but later
unconditionally dereferences it when setting up HPD interrupts.
Assign dc_link early and skip connectors where it is NULL.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init()
error: we previously assumed 'dc_link' could be null (see line 931)
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c
923 /*
924 * Analog connectors may be hot-plugged unlike other connector
925 * types that don't support HPD. Only poll analog connectors.
926 */
927 use_polling |=
928 amdgpu_dm_connector->dc_link &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed
929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id);
930
931 dc_link = amdgpu_dm_connector->dc_link;
dc_link assigned here.
932
933 /*
934 * Get a base driver irq reference for hpd ints for the lifetime
935 * of dm. Note that only hpd interrupt types are registered with
936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on
937 * hpd_rx isn't available. DM currently controls hpd_rx
938 * explicitly with dc_interrupt_set()
939 */
--> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) {
^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here.
941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1;
942 /*
943 * TODO: There's a mismatch between mode_info.num_hpd
944 * and what bios reports as the # of connectors with hpd |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc, afs: Fix missing error pointer check after rxrpc_kernel_lookup_peer()
rxrpc_kernel_lookup_peer() can also return error pointers in addition to
NULL, so just checking for NULL is not sufficient.
Fix this by:
(1) Changing rxrpc_kernel_lookup_peer() to return -ENOMEM rather than NULL
on allocation failure.
(2) Making the callers in afs use IS_ERR() and PTR_ERR() to pass on the
error code returned. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL pointer dereference in dcn401_init_hw()
dcn401_init_hw() assumes that update_bw_bounding_box() is valid when
entering the update path. However, the existing condition:
((!fams2_enable && update_bw_bounding_box) || freq_changed)
does not guarantee this, as the freq_changed branch can evaluate to true
independently of the callback pointer.
This can result in calling update_bw_bounding_box() when it is NULL.
Fix this by separating the update condition from the pointer checks and
ensuring the callback, dc->clk_mgr, and bw_params are validated before
use.
Fixes the below:
../dc/hwss/dcn401/dcn401_hwseq.c:367 dcn401_init_hw() error: we previously assumed 'dc->res_pool->funcs->update_bw_bounding_box' could be null (see line 362)
(cherry picked from commit 86117c5ab42f21562fedb0a64bffea3ee5fcd477) |
| In the Linux kernel, the following vulnerability has been resolved:
zram: set default primary compressor in zram_destroy_comps()
Patch series "zram: fix zram issues reported by sashiko".
Sashiko drove by and reported [1] a couple of zram issues:
a possible BUG_ON() in zlib code due to missing winbits range
validation and one possible NULL-ptr dereference in zcomp.
Both are low risk yet still worth fixing.
This patch (of 2):
zram_destroy_comps() resets all compressors and leaves them set to NULL,
including the primary one, which is invalid device state, as now
comp_algorithm_show()->strcmp() can be called on a NULL compressor. Set
default primary compressor in zram_destroy_comps(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/sva: Set handle->dev before the SVA handle is visible
iommu_attach_device_pasid() installs the new SVA attach handle in the
group PASID lookup before iommu_sva_bind_device() returns. A concurrent
bind can therefore find and reuse the same handle after iommu_sva_lock is
dropped.
handle->dev was initialized after dropping iommu_sva_lock. This leaves a
window where a racing bind can return a handle whose dev pointer is still
NULL. A subsequent iommu_sva_unbind_device() can then dereference it via
handle->dev->iommu_group.
Initialize handle->dev before releasing iommu_sva_lock so any visible SVA
handle is fully initialized. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: ISST: Add a NULL check for sst_inst[]
To be consistent with other places, add a NULL check for failed socket
loading by checking isst_common.sst_inst[]. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: check if dml21_add_phantom_plane() is successful
Verify that the phantom plane was allocated to avoid a later
segfault.
(cherry picked from commit 5adb54abe5a8e82cbff7f8806db30a5f4924329f) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: use proper context for logging
The same as the rest of the code, get_ss_info_from_atombios() uses
calc_pll_cs->ctx->logger for logging. But calc_pll_cs->ctx is
initialized only later in calc_pll_max_vco_construct(). Therefore, any
output using DC_LOG_SYNC() leads to a NULL pointer deference in
get_ss_info_from_atombios().
According to Sashiko, the very same problem exists in
dce112_get_pix_clk_dividers() and dcn3_get_pix_clk_dividers() too.
To avoid accessing the NULL context, use clk_src->base.ctx->logger
everywhere. That context in base is initialized earlier in
dce110_clk_src_construct() and dce112_clk_src_construct(). Before
get_ss_info_from_atombios() or Sashiko's get_pix_clk_dividers functions
above are actually called. This is done by redefining DC_LOGGER to
CTX->logger.
Before:
dce110_clk_src_construct() did:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses calc_pll_cs->ctx # BOOM
-> calc_pll_max_vco_construct() <- sets calc_pll_cs->ctx
After:
dce110_clk_src_construct() does:
-> sets clk_src->base.ctx = ctx;
-> ss_info_from_atombios_create()
-> get_ss_info_from_atombios() <- uses clk_src->base.ctx
(cherry picked from commit 6f16fcbb0c46a87e3d9685407e906573d60104b0) |
| In the Linux kernel, the following vulnerability has been resolved:
soc: xilinx: Fix race condition in event registration
The zynqmp_power driver registers handlers for suspend and subsystem
restart events using register_event(). However, the work structures
(zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by
these handlers were allocated and initialized after the registration
call.
This created a race window where, if the firmware triggered an event
immediately after registration but before allocation, the callback
(suspend_event_callback or subsystem_restart_event_callback) would
dereference a NULL pointer in work_pending(), leading to a crash.
Fix this by allocating and initializing the work structures before
registering the events. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix possible dereference of uninitialized pointer
There is a pointer head_page in rb_meta_validate_events() which is not
initialized at the beginning of a function. This pointer can be dereferenced
if there is a failure during reader page validation. In this case the control
is passed to "invalid" label where the pointer is dereferenced in a loop.
To fix the issue initialize orig_head and head_page before calling
rb_validate_buffer.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix Null reference while testing fluster
When multi instances are created/destroyed, many interrupts happens
and structures for decoder are removed.
"struct vpu_instance" this structure is shared for all flow in the decoder,
so if the structure is not protected by lock, Null dereference
could happens sometimes.
IRQ Handler was spilt to two phases and Lock was added as well. |
| In the Linux kernel, the following vulnerability has been resolved:
wireguard: device: use exit_rtnl callback instead of manual rtnl_lock in pre_exit
wg_netns_pre_exit() manually acquires rtnl_lock() inside the
pernet .pre_exit callback. This causes a hung task when another
thread holds rtnl_mutex - the cleanup_net workqueue (or the
setup_net failure rollback path) blocks indefinitely in
wg_netns_pre_exit() waiting to acquire the lock.
Convert to .exit_rtnl, introduced in commit 7a60d91c690b ("net:
Add ->exit_rtnl() hook to struct pernet_operations."), where the
framework already holds RTNL and batches all callbacks under a
single rtnl_lock()/rtnl_unlock() pair, eliminating the contention
window.
The rcu_assign_pointer(wg->creating_net, NULL) is safe to move
from .pre_exit to .exit_rtnl (which runs after synchronize_rcu())
because all RCU readers of creating_net either use maybe_get_net()
- which returns NULL for a dying namespace with zero refcount - or
access net->user_ns which remains valid throughout the entire
ops_undo_list sequence.
[ Jason: added __net_exit and __read_mostly annotations that were missing. ] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: dsi: Store driver data before invoking mipi_dsi_host_register
The call to mipi_dsi_host_register triggers a callback to mtk_dsi_bind,
which uses dev_get_drvdata to retrieve the mtk_dsi struct, so this
structure needs to be stored inside the driver data before invoking it.
As drvdata is currently uninitialized it leads to a crash when
registering the DSI DRM encoder right after acquiring
the mode_config.idr_mutex, blocking all subsequent DRM operations.
Fixes the following crash during mediatek-drm probe (tested on Xiaomi
Smart Clock x04g):
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000040
[...]
Modules linked in: mediatek_drm(+) drm_display_helper cec drm_client_lib
drm_dma_helper drm_kms_helper panel_simple
[...]
Call trace:
drm_mode_object_add+0x58/0x98 (P)
__drm_encoder_init+0x48/0x140
drm_encoder_init+0x6c/0xa0
drm_simple_encoder_init+0x20/0x34 [drm_kms_helper]
mtk_dsi_bind+0x34/0x13c [mediatek_drm]
component_bind_all+0x120/0x280
mtk_drm_bind+0x284/0x67c [mediatek_drm]
try_to_bring_up_aggregate_device+0x23c/0x320
__component_add+0xa4/0x198
component_add+0x14/0x20
mtk_dsi_host_attach+0x78/0x100 [mediatek_drm]
mipi_dsi_attach+0x2c/0x50
panel_simple_dsi_probe+0x4c/0x9c [panel_simple]
mipi_dsi_drv_probe+0x1c/0x28
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__device_attach_driver+0xbc/0x17c
bus_for_each_drv+0x88/0xf0
__device_attach+0x9c/0x1cc
device_initial_probe+0x54/0x60
bus_probe_device+0x34/0xa0
device_add+0x5b0/0x800
mipi_dsi_device_register_full+0xdc/0x16c
mipi_dsi_host_register+0xc4/0x17c
mtk_dsi_probe+0x10c/0x260 [mediatek_drm]
platform_probe+0x5c/0xa4
really_probe+0xc0/0x3dc
__driver_probe_device+0x80/0x160
driver_probe_device+0x40/0x120
__driver_attach+0xc8/0x1f8
bus_for_each_dev+0x7c/0xe0
driver_attach+0x24/0x30
bus_add_driver+0x11c/0x240
driver_register+0x68/0x130
__platform_register_drivers+0x64/0x160
mtk_drm_init+0x24/0x1000 [mediatek_drm]
do_one_initcall+0x60/0x1d0
do_init_module+0x54/0x240
load_module+0x1838/0x1dc0
init_module_from_file+0xd8/0xf0
__arm64_sys_finit_module+0x1b4/0x428
invoke_syscall.constprop.0+0x48/0xc8
do_el0_svc+0x3c/0xb8
el0_svc+0x34/0xe8
el0t_64_sync_handler+0xa0/0xe4
el0t_64_sync+0x198/0x19c
Code: 52800022 941004ab 2a0003f3 37f80040 (29005a80) |
