| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v5.0.1 enc ring
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit e16be95a2c3ee712b142cb27d2dca0b461181359) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn: set no_user_fence for VCN v5.0.0 enc ring
VCN encoder and decoder rings do not support 64-bit user fence writes,
reject CS submissions with user fences.
(cherry picked from commit 49b1fbbb5a071197ee71e2d70959b1cb29bdc317) |
| An improper privilege management vulnerability [CWE-269] vulnerability in Fortinet FortiClientEMS 7.2.0 through 7.2.2, FortiClientEMS 7.0.6 through 7.0.10, FortiClientEMS 7.0.0 through 7.0.4, FortiClientEMS 6.4 all versions, FortiClientEMS 06.02 all versions, FortiClientEMS 6.2 all versions allows an Site administrator with Super Admin privileges to perform global administrative operations affecting other sites via crafted HTTP or HTTPS requests. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: free learned nodes on device setup failure
hsr_dev_finalize() can fail after a lower-device RX handler has
already been registered (slave A is added before the failable slave B
and interlink adds). RX handlers run in softirq regardless of the
master's state, so frames received in that window can learn dynamic
nodes into node_db, and the error unwind never releases them.
Free both owned dynamic databases in the unwind, mirroring
hsr_dellink(). proxy_node_db is provably empty on every current error
exit (only interlink RX feeds it, and the interlink add is the last
failable step) and is freed for symmetry. The order is safe:
hsr_del_port() unregisters each RX handler with synchronize_net()
before hsr_del_nodes() runs, which removes remaining entries with
list_del_rcu() and defers their release with call_rcu() for readers
already under RCU. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix unsafe xarray access in implicit ODP handling
__xa_store() and __xa_erase() were used without holding the proper lock,
which led to a lockdep warning due to unsafe RCU usage. This patch
replaces them with xa_store() and xa_erase(), which perform the necessary
locking internally.
=============================
WARNING: suspicious RCPU usage
6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1 Not tainted
-----------------------------
./include/linux/xarray.h:1211 suspicious rcu_dereference_protected() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by kworker/u136:0/219:
at: process_one_work+0xbe4/0x15f0
process_one_work+0x75c/0x15f0
pagefault_mr+0x9a5/0x1390 [mlx5_ib]
stack backtrace:
CPU: 14 UID: 0 PID: 219 Comm: kworker/u136:0 Not tainted
6.14.0-rc7_for_upstream_debug_2025_03_18_15_01 #1
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014
Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib]
Call Trace:
dump_stack_lvl+0xa8/0xc0
lockdep_rcu_suspicious+0x1e6/0x260
xas_create+0xb8a/0xee0
xas_store+0x73/0x14c0
__xa_store+0x13c/0x220
? xa_store_range+0x390/0x390
? spin_bug+0x1d0/0x1d0
pagefault_mr+0xcb5/0x1390 [mlx5_ib]
? _raw_spin_unlock+0x1f/0x30
mlx5_ib_eqe_pf_action+0x3be/0x2620 [mlx5_ib]
? lockdep_hardirqs_on_prepare+0x400/0x400
? mlx5_ib_invalidate_range+0xcb0/0xcb0 [mlx5_ib]
process_one_work+0x7db/0x15f0
? pwq_dec_nr_in_flight+0xda0/0xda0
? assign_work+0x168/0x240
worker_thread+0x57d/0xcd0
? rescuer_thread+0xc40/0xc40
kthread+0x3b3/0x800
? kthread_is_per_cpu+0xb0/0xb0
? lock_downgrade+0x680/0x680
? do_raw_spin_lock+0x12d/0x270
? spin_bug+0x1d0/0x1d0
? finish_task_switch.isra.0+0x284/0x9e0
? lockdep_hardirqs_on_prepare+0x284/0x400
? kthread_is_per_cpu+0xb0/0xb0
ret_from_fork+0x2d/0x70
? kthread_is_per_cpu+0xb0/0xb0
ret_from_fork_asm+0x11/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: eir: Fix possible crashes on eir_create_adv_data
eir_create_adv_data may attempt to add EIR_FLAGS and EIR_TX_POWER
without checking if that would fit. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: hyperv_fb: Allow graceful removal of framebuffer
When a Hyper-V framebuffer device is unbind, hyperv_fb driver tries to
release the framebuffer forcefully. If this framebuffer is in use it
produce the following WARN and hence this framebuffer is never released.
[ 44.111220] WARNING: CPU: 35 PID: 1882 at drivers/video/fbdev/core/fb_info.c:70 framebuffer_release+0x2c/0x40
< snip >
[ 44.111289] Call Trace:
[ 44.111290] <TASK>
[ 44.111291] ? show_regs+0x6c/0x80
[ 44.111295] ? __warn+0x8d/0x150
[ 44.111298] ? framebuffer_release+0x2c/0x40
[ 44.111300] ? report_bug+0x182/0x1b0
[ 44.111303] ? handle_bug+0x6e/0xb0
[ 44.111306] ? exc_invalid_op+0x18/0x80
[ 44.111308] ? asm_exc_invalid_op+0x1b/0x20
[ 44.111311] ? framebuffer_release+0x2c/0x40
[ 44.111313] ? hvfb_remove+0x86/0xa0 [hyperv_fb]
[ 44.111315] vmbus_remove+0x24/0x40 [hv_vmbus]
[ 44.111323] device_remove+0x40/0x80
[ 44.111325] device_release_driver_internal+0x20b/0x270
[ 44.111327] ? bus_find_device+0xb3/0xf0
Fix this by moving the release of framebuffer and assosiated memory
to fb_ops.fb_destroy function, so that framebuffer framework handles
it gracefully.
While we fix this, also replace manual registrations/unregistration of
framebuffer with devm_register_framebuffer. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: use the DMA API for resource backing on Xen
On a Xen PV domain page addresses bear no relation to the real machine
addresses the host would have to use to reach it.
virtio_ring.c handles this correctly, vring_use_map_api() returns true
for any xen_domain() regardless of VIRTIO_F_ACCESS_PLATFORM.
virtio-gpu makes the same decision independently, but its copy
looks only at the feature bit:
bool use_dma_api = !virtio_has_dma_quirk(vgdev->vdev);
QEMU does not set iommu_platform on virtio-vga by default, so
VIRTIO_F_ACCESS_PLATFORM is not negotiated, use_dma_api is false, and
virtio_gpu_object_shmem_init() describes the framebuffer's backing pages
to the host with sg_phys(). Those are guest-physical addresses. In a PV
domain they resolve, on the host side, to pages belonging to some other
domain, so the host scans out unrelated memory.
Move the decision into virtio_gpu_use_dma_api() and give it the
xen_domain() check, like vring_use_map_api() has. This
additionally enables the dma_sync_sgtable_for_device() calls in
virtgpu_vq.c, which are required for correctness whenever swiotlb
is in play.
Reproduced with a Xen 4.21 PV dom0 nested inside QEMU 8.2 with
virtio-vga, on both a distro 6.8 kernel and 6.18 LTS. A PVH dom0
works fine and doesn't need this fix because it is identity-mapped,
only PV dom0s are affected. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix zeropoint update where i_size > remote_i_size
Fix the update of the zero point[*] by netfs_release_folio() when there is
uncommitted data in the pagecache beyond the folio being released but the
on-server EOF is in this folio (ie. i_size > remote_i_size). The update
needs to limit zero_point to remote_i_size, not i_size as i_size is a local
phenomenon reflecting updates made locally to the pagecache, not stuff
written to the server. remote_i_size tracks the server's i_size.
[*] The zero point is the file position from which we can assume that the
server will just return zeros, so we can avoid generating reads.
Note that netfs_invalidate_folio() probably doesn't need fixing as
zero_point should be updated by setattr after truncation or fallocate.
Found with:
fsx -q -N 1000000 -p 10000 -o 128000 -l 600000 \
/xfstest.test/junk --replay-ops=junk.fsxops
using the following as junk.fsxops:
truncate 0x0 0x1bbae 0x82864
write 0x3ef2e 0xf9c8 0x1bbae
write 0x67e05 0xcb5a 0x4e8f6
mapread 0x57781 0x85b6 0x7495f
copy_range 0x5d3d 0x10329 0x54fac 0x7495f
write 0x64710 0x1c2b 0x7495f
mapread 0x64000 0x1000 0x7495f
on cifs with the default cache option.
It shows read-gaps on folio 0x64 failing with a short read (ie. it hits
EOF) if the FMODE_READ check is commented out in netfs_perform_write():
if (//(file->f_mode & FMODE_READ) ||
netfs_is_cache_enabled(ctx)) {
and no fscache. This was initially found with the generic/522 xfstest. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: module: call ethnl_ops_complete() on module flash errors
When validate() fails we are skipping over ethnl_ops_complete()
even tho we already called ethnl_ops_begin(). |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/napi: cap busy_poll_to 10 msec
Currently there's no cap on the maximum amount of time that napi is
allowed to poll if no events are found, which can lead to kernel
complaints on a task being stuck as there's no conditional rescheduling
done within that loop.
Just cap it to 10 msec in total, that's already way above any kind of
sane value that will reap any benefits, yet low enough that it's
nowhere near being able to trigger preemption complaints. |
| In the Linux kernel, the following vulnerability has been resolved:
net: pull headers in qdisc_pkt_len_segs_init()
Most ndo_start_xmit() methods expects headers of gso packets
to be already in skb->head.
net/core/tso.c users are particularly at risk, because tso_build_hdr()
does a memcpy(hdr, skb->data, hdr_len);
qdisc_pkt_len_segs_init() already does a dissection of gso packets.
Use pskb_may_pull() instead of skb_header_pointer() to make
sure drivers do not have to reimplement this.
Some malicious packets could be fed, detect them so that we can
drop them sooner with a new SKB_DROP_REASON_SKB_BAD_GSO drop_reason. |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: fix BQL imbalance in TX path
Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight
packets are accounted only for the AIROHA_NUM_TX_RING netdev TX
queues. The queue index is computed as:
qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx)
txq = netdev_get_tx_queue(dev, qid);
However, airoha_qdma_tx_napi_poll() accounts completions across all
netdev TX queues (num_tx_queues), leading to inconsistent BQL
accounting.
Also reset all netdev TX queues in the ndo_stop callback. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/rxe: Fix iova-to-va conversion for MR page sizes != PAGE_SIZE
The current implementation incorrectly handles memory regions (MRs) with
page sizes different from the system PAGE_SIZE. The core issue is that
rxe_set_page() is called with mr->page_size step increments, but the
page_list stores individual struct page pointers, each representing
PAGE_SIZE of memory.
ib_sg_to_page() has ensured that when i>=1 either
a) SG[i-1].dma_end and SG[i].dma_addr are contiguous
or
b) SG[i-1].dma_end and SG[i].dma_addr are mr->page_size aligned.
This leads to incorrect iova-to-va conversion in scenarios:
1) page_size < PAGE_SIZE (e.g., MR: 4K, system: 64K):
ibmr->iova = 0x181800
sg[0]: dma_addr=0x181800, len=0x800
sg[1]: dma_addr=0x173000, len=0x1000
Access iova = 0x181800 + 0x810 = 0x182010
Expected VA: 0x173010 (second SG, offset 0x10)
Before fix:
- index = (0x182010 >> 12) - (0x181800 >> 12) = 1
- page_offset = 0x182010 & 0xFFF = 0x10
- xarray[1] stores system page base 0x170000
- Resulting VA: 0x170000 + 0x10 = 0x170010 (wrong)
2) page_size > PAGE_SIZE (e.g., MR: 64K, system: 4K):
ibmr->iova = 0x18f800
sg[0]: dma_addr=0x18f800, len=0x800
sg[1]: dma_addr=0x170000, len=0x1000
Access iova = 0x18f800 + 0x810 = 0x190010
Expected VA: 0x170010 (second SG, offset 0x10)
Before fix:
- index = (0x190010 >> 16) - (0x18f800 >> 16) = 1
- page_offset = 0x190010 & 0xFFFF = 0x10
- xarray[1] stores system page for dma_addr 0x170000
- Resulting VA: system page of 0x170000 + 0x10 = 0x170010 (wrong)
Yi Zhang reported a kernel panic[1] years ago related to this defect.
Solution:
1. Replace xarray with pre-allocated rxe_mr_page array for sequential
indexing (all MR page indices are contiguous)
2. Each rxe_mr_page stores both struct page* and offset within the
system page
3. Handle MR page_size != PAGE_SIZE relationships:
- page_size > PAGE_SIZE: Split MR pages into multiple system pages
- page_size <= PAGE_SIZE: Store offset within system page
4. Add boundary checks and compatibility validation
This ensures correct iova-to-va conversion regardless of MR page size
and system PAGE_SIZE relationship, while improving performance through
array-based sequential access.
Tests on 4K and 64K PAGE_SIZE hosts:
- rdma-core/pytests
$ ./build/bin/run_tests.py --dev eth0_rxe
- blktest:
$ TIMEOUT=30 QUICK_RUN=1 USE_RXE=1 NVMET_TRTYPES=rdma ./check nvme srp rnbd
[1] https://lore.kernel.org/all/CAHj4cs9XRqE25jyVw9rj9YugffLn5+f=1znaBEnu1usLOciD+g@mail.gmail.com/T/ |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1
Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want
to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the
hypercall is something other than one of the supported Hyper-V hypercalls.
When all of the above conditions are met, KVM will intercept VMMCALL but
never forward it to L1, i.e. will let L2 make hypercalls as if it were L1.
The TLFS says a whole lot of nothing about this scenario, so go with the
architectural behavior, which says that VMMCALL #UDs if it's not
intercepted.
Opportunistically do a 2-for-1 stub trade by stub-ifying the new API
instead of the helpers it uses. The last remaining "single" stub will
soon be dropped as well.
[sean: rewrite changelog and comment, tag for stable, remove defunct stubs] |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi:ssif: Clean up kthread on errors
If an error occurs after the ssif kthread is created, but before the
main IPMI code starts the ssif interface, the ssif kthread will not
be stopped.
So make sure the kthread is stopped on an error condition if it is
running. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix UMR hang in LAG error state unload
During firmware reset in LAG mode, a race condition causes the driver
to hang indefinitely while waiting for UMR completion during device
unload. See [1].
In LAG mode the bond device is only registered on the master, so it
never sees sys_error events from the slave.
During firmware reset this causes UMR waits to hang forever on unload
as the slave is dead but the master hasn't entered error state yet, so
UMR posts succeed but completions never arrive.
Fix this by adding a sys_error notifier that gets registered before
MLX5_IB_STAGE_IB_REG and stays alive until after ib_unregister_device().
This ensures error events reach the bond device throughout teardown.
[1]
Call Trace:
__schedule+0x2bd/0x760
schedule+0x37/0xa0
schedule_preempt_disabled+0xa/0x10
__mutex_lock.isra.6+0x2b5/0x4a0
__mlx5_ib_dereg_mr+0x606/0x870 [mlx5_ib]
? __xa_erase+0x4a/0xa0
? _cond_resched+0x15/0x30
? wait_for_completion+0x31/0x100
ib_dereg_mr_user+0x48/0xc0 [ib_core]
? rdmacg_uncharge_hierarchy+0xa0/0x100
destroy_hw_idr_uobject+0x20/0x50 [ib_uverbs]
uverbs_destroy_uobject+0x37/0x150 [ib_uverbs]
__uverbs_cleanup_ufile+0xda/0x140 [ib_uverbs]
uverbs_destroy_ufile_hw+0x3a/0xf0 [ib_uverbs]
ib_uverbs_remove_one+0xc3/0x140 [ib_uverbs]
remove_client_context+0x8b/0xd0 [ib_core]
disable_device+0x8c/0x130 [ib_core]
__ib_unregister_device+0x10d/0x180 [ib_core]
ib_unregister_device+0x21/0x30 [ib_core]
__mlx5_ib_remove+0x1e4/0x1f0 [mlx5_ib]
auxiliary_bus_remove+0x1e/0x30
device_release_driver_internal+0x103/0x1f0
bus_remove_device+0xf7/0x170
device_del+0x181/0x410
mlx5_rescan_drivers_locked.part.10+0xa9/0x1d0 [mlx5_core]
mlx5_disable_lag+0x253/0x260 [mlx5_core]
mlx5_lag_disable_change+0x89/0xc0 [mlx5_core]
mlx5_eswitch_disable+0x67/0xa0 [mlx5_core]
mlx5_unload+0x15/0xd0 [mlx5_core]
mlx5_unload_one+0x71/0xc0 [mlx5_core]
mlx5_sync_reset_reload_work+0x83/0x100 [mlx5_core]
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x116/0x130
? kthread_flush_work_fn+0x10/0x10
ret_from_fork+0x22/0x40 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix tcx/netkit detach permissions when prog fd isn't given
This commit fixes a security issue where BPF_PROG_DETACH on tcx or
netkit devices could be executed by any user when no program fd was
provided, bypassing permission checks. The fix adds a capability
check for CAP_NET_ADMIN or CAP_SYS_ADMIN in this case. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: revert commit_mutex usage in reset path
It causes circular lock dependency between commit_mutex, nfnl_subsys_ipset
and nlk_cb_mutex when nft reset, ipset list, and iptables-nft with '-m set'
rule run at the same time.
Previous patches made it safe to run individual reset handlers concurrently
so commit_mutex is no longer required to prevent this. |
| In the Linux kernel, the following vulnerability has been resolved:
nouveau/gsp: drop WARN_ON in ACPI probes
These WARN_ONs seem to trigger a lot, and we don't seem to have a
plan to fix them, so just drop them, as they are most likely
harmless. |
