| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla1280: Fix kernel oops when debug level > 2
A null dereference or oops exception will eventually occur when qla1280.c
driver is compiled with DEBUG_QLA1280 enabled and ql_debug_level > 2. I
think its clear from the code that the intention here is sg_dma_len(s) not
length of sg_next(s) when printing the debug info. |
| openjpeg v 2.5.0 was discovered to contain a NULL pointer dereference via the component /openjp2/dwt.c. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip Recompute DSC Params if no Stream on Link
[why]
Encounter NULL pointer dereference uner mst + dsc setup.
BUG: kernel NULL pointer dereference, address: 0000000000000008
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 917 Comm: sway Not tainted 6.3.9-arch1-1 #1 124dc55df4f5272ccb409f39ef4872fc2b3376a2
Hardware name: LENOVO 20NKS01Y00/20NKS01Y00, BIOS R12ET61W(1.31 ) 07/28/2022
RIP: 0010:drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper]
Code: 01 00 00 48 8b 85 60 05 00 00 48 63 80 88 00 00 00 3b 43 28 0f 8d 2e 01 00 00 48 8b 53 30 48 8d 04 80 48 8d 04 c2 48 8b 40 18 <48> 8>
RSP: 0018:ffff960cc2df77d8 EFLAGS: 00010293
RAX: 0000000000000000 RBX: ffff8afb87e81280 RCX: 0000000000000224
RDX: ffff8afb9ee37c00 RSI: ffff8afb8da1a578 RDI: ffff8afb87e81280
RBP: ffff8afb83d67000 R08: 0000000000000001 R09: ffff8afb9652f850
R10: ffff960cc2df7908 R11: 0000000000000002 R12: 0000000000000000
R13: ffff8afb8d7688a0 R14: ffff8afb8da1a578 R15: 0000000000000224
FS: 00007f4dac35ce00(0000) GS:ffff8afe30b00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000010ddc6000 CR4: 00000000003506e0
Call Trace:
<TASK>
? __die+0x23/0x70
? page_fault_oops+0x171/0x4e0
? plist_add+0xbe/0x100
? exc_page_fault+0x7c/0x180
? asm_exc_page_fault+0x26/0x30
? drm_dp_atomic_find_time_slots+0x5e/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026]
? drm_dp_atomic_find_time_slots+0x28/0x260 [drm_display_helper 0e67723696438d8e02b741593dd50d80b44c2026]
compute_mst_dsc_configs_for_link+0x2ff/0xa40 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
? fill_plane_buffer_attributes+0x419/0x510 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
compute_mst_dsc_configs_for_state+0x1e1/0x250 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
amdgpu_dm_atomic_check+0xecd/0x1190 [amdgpu 62e600d2a75e9158e1cd0a243bdc8e6da040c054]
drm_atomic_check_only+0x5c5/0xa40
drm_mode_atomic_ioctl+0x76e/0xbc0
[how]
dsc recompute should be skipped if no mode change detected on the new
request. If detected, keep checking whether the stream is already on
current state or not. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()
vgic_v2_parse_attr() is responsible for finding the vCPU that matches
the user-provided CPUID, which (of course) may not be valid. If the ID
is invalid, kvm_get_vcpu_by_id() returns NULL, which isn't handled
gracefully.
Similar to the GICv3 uaccess flow, check that kvm_get_vcpu_by_id()
actually returns something and fail the ioctl if not. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ll_temac: platform_get_resource replaced by wrong function
The function platform_get_resource was replaced with
devm_platform_ioremap_resource_byname and is called using 0 as name.
This eventually ends up in platform_get_resource_byname in the call
stack, where it causes a null pointer in strcmp.
if (type == resource_type(r) && !strcmp(r->name, name))
It should have been replaced with devm_platform_ioremap_resource. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| A NULL pointer dereference in the ADTSAudioFileServerMediaSubsession::createNewRTPSink() function of Live555 Streaming Media v2018.09.02 allows attackers to cause a Denial of Service (DoS) via supplying a crafted ADTS file. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dw-axi-dmac: do not print NULL LLI during error
During debugging we have seen an issue where axi_chan_dump_lli()
is passed a NULL LLI pointer which ends up causing an OOPS due
to trying to get fields from it. Simply print NULL LLI and exit
to avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: initialize device's zone info for seeding
When performing seeding on a zoned filesystem it is necessary to
initialize each zoned device's btrfs_zoned_device_info structure,
otherwise mounting the filesystem will cause a NULL pointer dereference.
This was uncovered by fstests' testcase btrfs/163. |
| In the Linux kernel, the following vulnerability has been resolved:
ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()
In an unlikely (and probably wrong?) case that the 'ppi' parameter of
ata_host_alloc_pinfo() points to an array starting with a NULL pointer,
there's going to be a kernel oops as the 'pi' local variable won't get
reassigned from the initial value of NULL. Initialize 'pi' instead to
'&ata_dummy_port_info' to fix the possible kernel oops for good...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: add reserved GDT blocks check
We capture a NULL pointer issue when resizing a corrupt ext4 image which
is freshly clear resize_inode feature (not run e2fsck). It could be
simply reproduced by following steps. The problem is because of the
resize_inode feature was cleared, and it will convert the filesystem to
meta_bg mode in ext4_resize_fs(), but the es->s_reserved_gdt_blocks was
not reduced to zero, so could we mistakenly call reserve_backup_gdb()
and passing an uninitialized resize_inode to it when adding new group
descriptors.
mkfs.ext4 /dev/sda 3G
tune2fs -O ^resize_inode /dev/sda #forget to run requested e2fsck
mount /dev/sda /mnt
resize2fs /dev/sda 8G
========
BUG: kernel NULL pointer dereference, address: 0000000000000028
CPU: 19 PID: 3243 Comm: resize2fs Not tainted 5.18.0-rc7-00001-gfde086c5ebfd #748
...
RIP: 0010:ext4_flex_group_add+0xe08/0x2570
...
Call Trace:
<TASK>
ext4_resize_fs+0xbec/0x1660
__ext4_ioctl+0x1749/0x24e0
ext4_ioctl+0x12/0x20
__x64_sys_ioctl+0xa6/0x110
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f2dd739617b
========
The fix is simple, add a check in ext4_resize_begin() to make sure that
the es->s_reserved_gdt_blocks is zero when the resize_inode feature is
disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
ipw2x00: Fix potential NULL dereference in libipw_xmit()
crypt and crypt->ops could be null, so we need to checking null
before dereference |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: jack: Access input_dev under mutex
It is possible when using ASoC that input_dev is unregistered while
calling snd_jack_report, which causes NULL pointer dereference.
In order to prevent this serialize access to input_dev using mutex lock. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/virtio: fix NULL pointer dereference in virtio_gpu_conn_get_modes
drm_cvt_mode may return NULL and we should check it.
This bug is found by syzkaller:
FAULT_INJECTION stacktrace:
[ 168.567394] FAULT_INJECTION: forcing a failure.
name failslab, interval 1, probability 0, space 0, times 1
[ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 168.567408] Call trace:
[ 168.567414] dump_backtrace+0x0/0x310
[ 168.567418] show_stack+0x28/0x38
[ 168.567423] dump_stack+0xec/0x15c
[ 168.567427] should_fail+0x3ac/0x3d0
[ 168.567437] __should_failslab+0xb8/0x120
[ 168.567441] should_failslab+0x28/0xc0
[ 168.567445] kmem_cache_alloc_trace+0x50/0x640
[ 168.567454] drm_mode_create+0x40/0x90
[ 168.567458] drm_cvt_mode+0x48/0xc78
[ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu]
[ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80
[ 168.567492] drm_mode_getconnector+0x2e0/0xa70
[ 168.567496] drm_ioctl_kernel+0x11c/0x1d8
[ 168.567514] drm_ioctl+0x558/0x6d0
[ 168.567522] do_vfs_ioctl+0x160/0xf30
[ 168.567525] ksys_ioctl+0x98/0xd8
[ 168.567530] __arm64_sys_ioctl+0x50/0xc8
[ 168.567536] el0_svc_common+0xc8/0x320
[ 168.567540] el0_svc_handler+0xf8/0x160
[ 168.567544] el0_svc+0x10/0x218
KASAN stacktrace:
[ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[ 168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425
[ 168.567566]
[ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1
[ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
[ 168.567575] Call trace:
[ 168.567578] dump_backtrace+0x0/0x310
[ 168.567582] show_stack+0x28/0x38
[ 168.567586] dump_stack+0xec/0x15c
[ 168.567591] kasan_report+0x244/0x2f0
[ 168.567594] __asan_load4+0x58/0xb0
[ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu]
[ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80
[ 168.567617] drm_mode_getconnector+0x2e0/0xa70
[ 168.567621] drm_ioctl_kernel+0x11c/0x1d8
[ 168.567624] drm_ioctl+0x558/0x6d0
[ 168.567628] do_vfs_ioctl+0x160/0xf30
[ 168.567632] ksys_ioctl+0x98/0xd8
[ 168.567636] __arm64_sys_ioctl+0x50/0xc8
[ 168.567641] el0_svc_common+0xc8/0x320
[ 168.567645] el0_svc_handler+0xf8/0x160
[ 168.567649] el0_svc+0x10/0x218 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix a NULL pointer dereference in nvme_alloc_admin_tags
In nvme_alloc_admin_tags, the admin_q can be set to an error (typically
-ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which
is checked immediately after the call. However, when we return the error
message up the stack, to nvme_reset_work the error takes us to
nvme_remove_dead_ctrl()
nvme_dev_disable()
nvme_suspend_queue(&dev->queues[0]).
Here, we only check that the admin_q is non-NULL, rather than not
an error or NULL, and begin quiescing a queue that never existed, leading
to bad / NULL pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: micrel: Allow probing without .driver_data
Currently, if the .probe element is present in the phy_driver structure
and the .driver_data is not, a NULL pointer dereference happens.
Allow passing .probe without .driver_data by inserting NULL checks
for priv->type. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/hfi1: Prevent panic when SDMA is disabled
If the hfi1 module is loaded with HFI1_CAP_SDMA off, a call to
hfi1_write_iter() will dereference a NULL pointer and panic. A typical
stack frame is:
sdma_select_user_engine [hfi1]
hfi1_user_sdma_process_request [hfi1]
hfi1_write_iter [hfi1]
do_iter_readv_writev
do_iter_write
vfs_writev
do_writev
do_syscall_64
The fix is to test for SDMA in hfi1_write_iter() and fail the I/O with
EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/arm-smmu-v3: check return value after calling platform_get_resource()
It will cause null-ptr-deref if platform_get_resource() returns NULL,
we need check the return value. |
