| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Do not let histogram values have some modifiers
Histogram values can not be strings, stacktraces, graphs, symbols,
syscalls, or grouped in buckets or log. Give an error if a value is set to
do so.
Note, the histogram code was not prepared to handle these modifiers for
histograms and caused a bug.
Mark Rutland reported:
# echo 'p:copy_to_user __arch_copy_to_user n=$arg2' >> /sys/kernel/tracing/kprobe_events
# echo 'hist:keys=n:vals=hitcount.buckets=8:sort=hitcount' > /sys/kernel/tracing/events/kprobes/copy_to_user/trigger
# cat /sys/kernel/tracing/events/kprobes/copy_to_user/hist
[ 143.694628] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[ 143.695190] Mem abort info:
[ 143.695362] ESR = 0x0000000096000004
[ 143.695604] EC = 0x25: DABT (current EL), IL = 32 bits
[ 143.695889] SET = 0, FnV = 0
[ 143.696077] EA = 0, S1PTW = 0
[ 143.696302] FSC = 0x04: level 0 translation fault
[ 143.702381] Data abort info:
[ 143.702614] ISV = 0, ISS = 0x00000004
[ 143.702832] CM = 0, WnR = 0
[ 143.703087] user pgtable: 4k pages, 48-bit VAs, pgdp=00000000448f9000
[ 143.703407] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000
[ 143.704137] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP
[ 143.704714] Modules linked in:
[ 143.705273] CPU: 0 PID: 133 Comm: cat Not tainted 6.2.0-00003-g6fc512c10a7c #3
[ 143.706138] Hardware name: linux,dummy-virt (DT)
[ 143.706723] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 143.707120] pc : hist_field_name.part.0+0x14/0x140
[ 143.707504] lr : hist_field_name.part.0+0x104/0x140
[ 143.707774] sp : ffff800008333a30
[ 143.707952] x29: ffff800008333a30 x28: 0000000000000001 x27: 0000000000400cc0
[ 143.708429] x26: ffffd7a653b20260 x25: 0000000000000000 x24: ffff10d303ee5800
[ 143.708776] x23: ffffd7a6539b27b0 x22: ffff10d303fb8c00 x21: 0000000000000001
[ 143.709127] x20: ffff10d303ec2000 x19: 0000000000000000 x18: 0000000000000000
[ 143.709478] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[ 143.709824] x14: 0000000000000000 x13: 203a6f666e692072 x12: 6567676972742023
[ 143.710179] x11: 0a230a6d6172676f x10: 000000000000002c x9 : ffffd7a6521e018c
[ 143.710584] x8 : 000000000000002c x7 : 7f7f7f7f7f7f7f7f x6 : 000000000000002c
[ 143.710915] x5 : ffff10d303b0103e x4 : ffffd7a653b20261 x3 : 000000000000003d
[ 143.711239] x2 : 0000000000020001 x1 : 0000000000000001 x0 : 0000000000000000
[ 143.711746] Call trace:
[ 143.712115] hist_field_name.part.0+0x14/0x140
[ 143.712642] hist_field_name.part.0+0x104/0x140
[ 143.712925] hist_field_print+0x28/0x140
[ 143.713125] event_hist_trigger_print+0x174/0x4d0
[ 143.713348] hist_show+0xf8/0x980
[ 143.713521] seq_read_iter+0x1bc/0x4b0
[ 143.713711] seq_read+0x8c/0xc4
[ 143.713876] vfs_read+0xc8/0x2a4
[ 143.714043] ksys_read+0x70/0xfc
[ 143.714218] __arm64_sys_read+0x24/0x30
[ 143.714400] invoke_syscall+0x50/0x120
[ 143.714587] el0_svc_common.constprop.0+0x4c/0x100
[ 143.714807] do_el0_svc+0x44/0xd0
[ 143.714970] el0_svc+0x2c/0x84
[ 143.715134] el0t_64_sync_handler+0xbc/0x140
[ 143.715334] el0t_64_sync+0x190/0x194
[ 143.715742] Code: a9bd7bfd 910003fd a90153f3 aa0003f3 (f9400000)
[ 143.716510] ---[ end trace 0000000000000000 ]---
Segmentation fault |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: update s_journal_inum if it changes after journal replay
When mounting a crafted ext4 image, s_journal_inum may change after journal
replay, which is obviously unreasonable because we have successfully loaded
and replayed the journal through the old s_journal_inum. And the new
s_journal_inum bypasses some of the checks in ext4_get_journal(), which
may trigger a null pointer dereference problem. So if s_journal_inum
changes after the journal replay, we ignore the change, and rewrite the
current journal_inum to the superblock. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix task hung in ext4_xattr_delete_inode
Syzbot reported a hung task problem:
==================================================================
INFO: task syz-executor232:5073 blocked for more than 143 seconds.
Not tainted 6.2.0-rc2-syzkaller-00024-g512dee0c00ad #0
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:syz-exec232 state:D stack:21024 pid:5073 ppid:5072 flags:0x00004004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5244 [inline]
__schedule+0x995/0xe20 kernel/sched/core.c:6555
schedule+0xcb/0x190 kernel/sched/core.c:6631
__wait_on_freeing_inode fs/inode.c:2196 [inline]
find_inode_fast+0x35a/0x4c0 fs/inode.c:950
iget_locked+0xb1/0x830 fs/inode.c:1273
__ext4_iget+0x22e/0x3ed0 fs/ext4/inode.c:4861
ext4_xattr_inode_iget+0x68/0x4e0 fs/ext4/xattr.c:389
ext4_xattr_inode_dec_ref_all+0x1a7/0xe50 fs/ext4/xattr.c:1148
ext4_xattr_delete_inode+0xb04/0xcd0 fs/ext4/xattr.c:2880
ext4_evict_inode+0xd7c/0x10b0 fs/ext4/inode.c:296
evict+0x2a4/0x620 fs/inode.c:664
ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474
__ext4_fill_super fs/ext4/super.c:5516 [inline]
ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644
get_tree_bdev+0x400/0x620 fs/super.c:1282
vfs_get_tree+0x88/0x270 fs/super.c:1489
do_new_mount+0x289/0xad0 fs/namespace.c:3145
do_mount fs/namespace.c:3488 [inline]
__do_sys_mount fs/namespace.c:3697 [inline]
__se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fa5406fd5ea
RSP: 002b:00007ffc7232f968 EFLAGS: 00000202 ORIG_RAX: 00000000000000a5
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fa5406fd5ea
RDX: 0000000020000440 RSI: 0000000020000000 RDI: 00007ffc7232f970
RBP: 00007ffc7232f970 R08: 00007ffc7232f9b0 R09: 0000000000000432
R10: 0000000000804a03 R11: 0000000000000202 R12: 0000000000000004
R13: 0000555556a7a2c0 R14: 00007ffc7232f9b0 R15: 0000000000000000
</TASK>
==================================================================
The problem is that the inode contains an xattr entry with ea_inum of 15
when cleaning up an orphan inode <15>. When evict inode <15>, the reference
counting of the corresponding EA inode is decreased. When EA inode <15> is
found by find_inode_fast() in __ext4_iget(), it is found that the EA inode
holds the I_FREEING flag and waits for the EA inode to complete deletion.
As a result, when inode <15> is being deleted, we wait for inode <15> to
complete the deletion, resulting in an infinite loop and triggering Hung
Task. To solve this problem, we only need to check whether the ino of EA
inode and parent is the same before getting EA inode. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/edid: fix info leak when failing to get panel id
Make sure to clear the transfer buffer before fetching the EDID to
avoid leaking slab data to the logs on errors that leave the buffer
unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
vp_vdpa: fix the crash in hot unplug with vp_vdpa
While unplugging the vp_vdpa device, it triggers a kernel panic
The root cause is: vdpa_mgmtdev_unregister() will accesses modern
devices which will cause a use after free.
So need to change the sequence in vp_vdpa_remove
[ 195.003359] BUG: unable to handle page fault for address: ff4e8beb80199014
[ 195.004012] #PF: supervisor read access in kernel mode
[ 195.004486] #PF: error_code(0x0000) - not-present page
[ 195.004960] PGD 100000067 P4D 1001b6067 PUD 1001b7067 PMD 1001b8067 PTE 0
[ 195.005578] Oops: 0000 1 PREEMPT SMP PTI
[ 195.005968] CPU: 13 PID: 164 Comm: kworker/u56:10 Kdump: loaded Not tainted 5.14.0-252.el9.x86_64 #1
[ 195.006792] Hardware name: Red Hat KVM/RHEL, BIOS edk2-20221207gitfff6d81270b5-2.el9 unknown
[ 195.007556] Workqueue: kacpi_hotplug acpi_hotplug_work_fn
[ 195.008059] RIP: 0010:ioread8+0x31/0x80
[ 195.008418] Code: 77 28 48 81 ff 00 00 01 00 76 0b 89 fa ec 0f b6 c0 c3 cc cc cc cc 8b 15 ad 72 93 01 b8 ff 00 00 00 85 d2 75 0f c3 cc cc cc cc <8a> 07 0f b6 c0 c3 cc cc cc cc 83 ea 01 48 83 ec 08 48 89 fe 48 c7
[ 195.010104] RSP: 0018:ff4e8beb8067bab8 EFLAGS: 00010292
[ 195.010584] RAX: ffffffffc05834a0 RBX: ffffffffc05843c0 RCX: ff4e8beb8067bae0
[ 195.011233] RDX: ff1bcbd580f88000 RSI: 0000000000000246 RDI: ff4e8beb80199014
[ 195.011881] RBP: ff1bcbd587e39000 R08: ffffffff916fa2d0 R09: ff4e8beb8067ba68
[ 195.012527] R10: 000000000000001c R11: 0000000000000000 R12: ff1bcbd5a3de9120
[ 195.013179] R13: ffffffffc062d000 R14: 0000000000000080 R15: ff1bcbe402bc7805
[ 195.013826] FS: 0000000000000000(0000) GS:ff1bcbe402740000(0000) knlGS:0000000000000000
[ 195.014564] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 195.015093] CR2: ff4e8beb80199014 CR3: 0000000107dea002 CR4: 0000000000771ee0
[ 195.015741] PKRU: 55555554
[ 195.016001] Call Trace:
[ 195.016233] <TASK>
[ 195.016434] vp_modern_get_status+0x12/0x20
[ 195.016823] vp_vdpa_reset+0x1b/0x50 [vp_vdpa]
[ 195.017238] virtio_vdpa_reset+0x3c/0x48 [virtio_vdpa]
[ 195.017709] remove_vq_common+0x1f/0x3a0 [virtio_net]
[ 195.018178] virtnet_remove+0x5d/0x70 [virtio_net]
[ 195.018618] virtio_dev_remove+0x3d/0x90
[ 195.018986] device_release_driver_internal+0x1aa/0x230
[ 195.019466] bus_remove_device+0xd8/0x150
[ 195.019841] device_del+0x18b/0x3f0
[ 195.020167] ? kernfs_find_ns+0x35/0xd0
[ 195.020526] device_unregister+0x13/0x60
[ 195.020894] unregister_virtio_device+0x11/0x20
[ 195.021311] device_release_driver_internal+0x1aa/0x230
[ 195.021790] bus_remove_device+0xd8/0x150
[ 195.022162] device_del+0x18b/0x3f0
[ 195.022487] device_unregister+0x13/0x60
[ 195.022852] ? vdpa_dev_remove+0x30/0x30 [vdpa]
[ 195.023270] vp_vdpa_dev_del+0x12/0x20 [vp_vdpa]
[ 195.023694] vdpa_match_remove+0x2b/0x40 [vdpa]
[ 195.024115] bus_for_each_dev+0x78/0xc0
[ 195.024471] vdpa_mgmtdev_unregister+0x65/0x80 [vdpa]
[ 195.024937] vp_vdpa_remove+0x23/0x40 [vp_vdpa]
[ 195.025353] pci_device_remove+0x36/0xa0
[ 195.025719] device_release_driver_internal+0x1aa/0x230
[ 195.026201] pci_stop_bus_device+0x6c/0x90
[ 195.026580] pci_stop_and_remove_bus_device+0xe/0x20
[ 195.027039] disable_slot+0x49/0x90
[ 195.027366] acpiphp_disable_and_eject_slot+0x15/0x90
[ 195.027832] hotplug_event+0xea/0x210
[ 195.028171] ? hotplug_event+0x210/0x210
[ 195.028535] acpiphp_hotplug_notify+0x22/0x80
[ 195.028942] ? hotplug_event+0x210/0x210
[ 195.029303] acpi_device_hotplug+0x8a/0x1d0
[ 195.029690] acpi_hotplug_work_fn+0x1a/0x30
[ 195.030077] process_one_work+0x1e8/0x3c0
[ 195.030451] worker_thread+0x50/0x3b0
[ 195.030791] ? rescuer_thread+0x3a0/0x3a0
[ 195.031165] kthread+0xd9/0x100
[ 195.031459] ? kthread_complete_and_exit+0x20/0x20
[ 195.031899] ret_from_fork+0x22/0x30
[ 195.032233] </TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: Fix steering rules cleanup
vport's mc, uc and multicast rules are not deleted in teardown path when
EEH happens. Since the vport's promisc settings(uc, mc and all) in
firmware are reset after EEH, mlx5 driver will try to delete the above
rules in the initialization path. This cause kernel crash because these
software rules are no longer valid.
Fix by nullifying these rules right after delete to avoid accessing any dangling
pointers.
Call Trace:
__list_del_entry_valid+0xcc/0x100 (unreliable)
tree_put_node+0xf4/0x1b0 [mlx5_core]
tree_remove_node+0x30/0x70 [mlx5_core]
mlx5_del_flow_rules+0x14c/0x1f0 [mlx5_core]
esw_apply_vport_rx_mode+0x10c/0x200 [mlx5_core]
esw_update_vport_rx_mode+0xb4/0x180 [mlx5_core]
esw_vport_change_handle_locked+0x1ec/0x230 [mlx5_core]
esw_enable_vport+0x130/0x260 [mlx5_core]
mlx5_eswitch_enable_sriov+0x2a0/0x2f0 [mlx5_core]
mlx5_device_enable_sriov+0x74/0x440 [mlx5_core]
mlx5_load_one+0x114c/0x1550 [mlx5_core]
mlx5_pci_resume+0x68/0xf0 [mlx5_core]
eeh_report_resume+0x1a4/0x230
eeh_pe_dev_traverse+0x98/0x170
eeh_handle_normal_event+0x3e4/0x640
eeh_handle_event+0x4c/0x370
eeh_event_handler+0x14c/0x210
kthread+0x168/0x1b0
ret_from_kernel_thread+0x5c/0x84 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate()
If alua_rtpg_queue() failed from alua_activate(), then 'qdata' is not
freed, which will cause following memleak:
unreferenced object 0xffff88810b2c6980 (size 32):
comm "kworker/u16:2", pid 635322, jiffies 4355801099 (age 1216426.076s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
40 39 24 c1 ff ff ff ff 00 f8 ea 0a 81 88 ff ff @9$.............
backtrace:
[<0000000098f3a26d>] alua_activate+0xb0/0x320
[<000000003b529641>] scsi_dh_activate+0xb2/0x140
[<000000007b296db3>] activate_path_work+0xc6/0xe0 [dm_multipath]
[<000000007adc9ace>] process_one_work+0x3c5/0x730
[<00000000c457a985>] worker_thread+0x93/0x650
[<00000000cb80e628>] kthread+0x1ba/0x210
[<00000000a1e61077>] ret_from_fork+0x22/0x30
Fix the problem by freeing 'qdata' in error path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: fix shift-out-of-bounds in CalculateVMAndRowBytes
[WHY]
When PTEBufferSizeInRequests is zero, UBSAN reports the following
warning because dml_log2 returns an unexpected negative value:
shift exponent 4294966273 is too large for 32-bit type 'int'
[HOW]
In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and
assign the result directly. |
| In the Linux kernel, the following vulnerability has been resolved:
ftrace: Fix invalid address access in lookup_rec() when index is 0
KASAN reported follow problem:
BUG: KASAN: use-after-free in lookup_rec
Read of size 8 at addr ffff000199270ff0 by task modprobe
CPU: 2 Comm: modprobe
Call trace:
kasan_report
__asan_load8
lookup_rec
ftrace_location
arch_check_ftrace_location
check_kprobe_address_safe
register_kprobe
When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a
pg which is newly added to ftrace_pages_start in ftrace_process_locs().
Before the first pg->index++, index is 0 and accessing pg->records[-1].ip
will cause this problem.
Don't check the ip when pg->index is 0. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix ttm_bo calltrace warning in psp_hw_fini
The call trace occurs when the amdgpu is removed after
the mode1 reset. During mode1 reset, from suspend to resume,
there is no need to reinitialize the ta firmware buffer
which caused the bo pin_count increase redundantly.
[ 489.885525] Call Trace:
[ 489.885525] <TASK>
[ 489.885526] amdttm_bo_put+0x34/0x50 [amdttm]
[ 489.885529] amdgpu_bo_free_kernel+0xe8/0x130 [amdgpu]
[ 489.885620] psp_free_shared_bufs+0xb7/0x150 [amdgpu]
[ 489.885720] psp_hw_fini+0xce/0x170 [amdgpu]
[ 489.885815] amdgpu_device_fini_hw+0x2ff/0x413 [amdgpu]
[ 489.885960] ? blocking_notifier_chain_unregister+0x56/0xb0
[ 489.885962] amdgpu_driver_unload_kms+0x51/0x60 [amdgpu]
[ 489.886049] amdgpu_pci_remove+0x5a/0x140 [amdgpu]
[ 489.886132] ? __pm_runtime_resume+0x60/0x90
[ 489.886134] pci_device_remove+0x3e/0xb0
[ 489.886135] __device_release_driver+0x1ab/0x2a0
[ 489.886137] driver_detach+0xf3/0x140
[ 489.886138] bus_remove_driver+0x6c/0xf0
[ 489.886140] driver_unregister+0x31/0x60
[ 489.886141] pci_unregister_driver+0x40/0x90
[ 489.886142] amdgpu_exit+0x15/0x451 [amdgpu] |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/core: Always clear status for idx
The variable 'status' (which contains the unhandled overflow bits) is
not being properly masked in some cases, displaying the following
warning:
WARNING: CPU: 156 PID: 475601 at arch/x86/events/amd/core.c:972 amd_pmu_v2_handle_irq+0x216/0x270
This seems to be happening because the loop is being continued before
the status bit being unset, in case x86_perf_event_set_period()
returns 0. This is also causing an inconsistency because the "handled"
counter is incremented, but the status bit is not cleaned.
Move the bit cleaning together above, together when the "handled"
counter is incremented. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: do not run mt76_unregister_device() on unregistered hw
Trying to probe a mt7921e pci card without firmware results in a
successful probe where ieee80211_register_hw hasn't been called. When
removing the driver, ieee802111_unregister_hw is called unconditionally
leading to a kernel NULL pointer dereference.
Fix the issue running mt76_unregister_device routine just for registered
hw. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: PPTT: Fix to avoid sleep in the atomic context when PPTT is absent
Commit 0c80f9e165f8 ("ACPI: PPTT: Leave the table mapped for the runtime usage")
enabled to map PPTT once on the first invocation of acpi_get_pptt() and
never unmapped the same allowing it to be used at runtime with out the
hassle of mapping and unmapping the table. This was needed to fetch LLC
information from the PPTT in the cpuhotplug path which is executed in
the atomic context as the acpi_get_table() might sleep waiting for a
mutex.
However it missed to handle the case when there is no PPTT on the system
which results in acpi_get_pptt() being called from all the secondary
CPUs attempting to fetch the LLC information in the atomic context
without knowing the absence of PPTT resulting in the splat like below:
| BUG: sleeping function called from invalid context at kernel/locking/semaphore.c:164
| in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 0, name: swapper/1
| preempt_count: 1, expected: 0
| RCU nest depth: 0, expected: 0
| no locks held by swapper/1/0.
| irq event stamp: 0
| hardirqs last enabled at (0): 0x0
| hardirqs last disabled at (0): copy_process+0x61c/0x1b40
| softirqs last enabled at (0): copy_process+0x61c/0x1b40
| softirqs last disabled at (0): 0x0
| CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.3.0-rc1 #1
| Call trace:
| dump_backtrace+0xac/0x138
| show_stack+0x30/0x48
| dump_stack_lvl+0x60/0xb0
| dump_stack+0x18/0x28
| __might_resched+0x160/0x270
| __might_sleep+0x58/0xb0
| down_timeout+0x34/0x98
| acpi_os_wait_semaphore+0x7c/0xc0
| acpi_ut_acquire_mutex+0x58/0x108
| acpi_get_table+0x40/0xe8
| acpi_get_pptt+0x48/0xa0
| acpi_get_cache_info+0x38/0x140
| init_cache_level+0xf4/0x118
| detect_cache_attributes+0x2e4/0x640
| update_siblings_masks+0x3c/0x330
| store_cpu_topology+0x88/0xf0
| secondary_start_kernel+0xd0/0x168
| __secondary_switched+0xb8/0xc0
Update acpi_get_pptt() to consider the fact that PPTT is once checked and
is not available on the system and return NULL avoiding any attempts to
fetch PPTT and thereby avoiding any possible sleep waiting for a mutex
in the atomic context. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-vf: Add missing free for alloc_percpu
Add the free_percpu for the allocated "vf->hw.lmt_info" in order to avoid
memory leak, same as the "pf->hw.lmt_info" in
`drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c`. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: smsc95xx: Limit packet length to skb->len
Packet length retrieved from descriptor may be larger than
the actual socket buffer length. In such case the cloned
skb passed up the network stack will leak kernel memory contents. |
| In the Linux kernel, the following vulnerability has been resolved:
igb: revert rtnl_lock() that causes deadlock
The commit 6faee3d4ee8b ("igb: Add lock to avoid data race") adds
rtnl_lock to eliminate a false data race shown below
(FREE from device detaching) | (USE from netdev core)
igb_remove | igb_ndo_get_vf_config
igb_disable_sriov | vf >= adapter->vfs_allocated_count?
kfree(adapter->vf_data) |
adapter->vfs_allocated_count = 0 |
| memcpy(... adapter->vf_data[vf]
The above race will never happen and the extra rtnl_lock causes deadlock
below
[ 141.420169] <TASK>
[ 141.420672] __schedule+0x2dd/0x840
[ 141.421427] schedule+0x50/0xc0
[ 141.422041] schedule_preempt_disabled+0x11/0x20
[ 141.422678] __mutex_lock.isra.13+0x431/0x6b0
[ 141.423324] unregister_netdev+0xe/0x20
[ 141.423578] igbvf_remove+0x45/0xe0 [igbvf]
[ 141.423791] pci_device_remove+0x36/0xb0
[ 141.423990] device_release_driver_internal+0xc1/0x160
[ 141.424270] pci_stop_bus_device+0x6d/0x90
[ 141.424507] pci_stop_and_remove_bus_device+0xe/0x20
[ 141.424789] pci_iov_remove_virtfn+0xba/0x120
[ 141.425452] sriov_disable+0x2f/0xf0
[ 141.425679] igb_disable_sriov+0x4e/0x100 [igb]
[ 141.426353] igb_remove+0xa0/0x130 [igb]
[ 141.426599] pci_device_remove+0x36/0xb0
[ 141.426796] device_release_driver_internal+0xc1/0x160
[ 141.427060] driver_detach+0x44/0x90
[ 141.427253] bus_remove_driver+0x55/0xe0
[ 141.427477] pci_unregister_driver+0x2a/0xa0
[ 141.428296] __x64_sys_delete_module+0x141/0x2b0
[ 141.429126] ? mntput_no_expire+0x4a/0x240
[ 141.429363] ? syscall_trace_enter.isra.19+0x126/0x1a0
[ 141.429653] do_syscall_64+0x5b/0x80
[ 141.429847] ? exit_to_user_mode_prepare+0x14d/0x1c0
[ 141.430109] ? syscall_exit_to_user_mode+0x12/0x30
[ 141.430849] ? do_syscall_64+0x67/0x80
[ 141.431083] ? syscall_exit_to_user_mode_prepare+0x183/0x1b0
[ 141.431770] ? syscall_exit_to_user_mode+0x12/0x30
[ 141.432482] ? do_syscall_64+0x67/0x80
[ 141.432714] ? exc_page_fault+0x64/0x140
[ 141.432911] entry_SYSCALL_64_after_hwframe+0x72/0xdc
Since the igb_disable_sriov() will call pci_disable_sriov() before
releasing any resources, the netdev core will synchronize the cleanup to
avoid any races. This patch removes the useless rtnl_(un)lock to guarantee
correctness. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-Switch, Fix an Oops in error handling code
The error handling dereferences "vport". There is nothing we can do if
it is an error pointer except returning the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Synchronize the IOCB count to be in order
A system hang was observed with the following call trace:
BUG: kernel NULL pointer dereference, address: 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 15 PID: 86747 Comm: nvme Kdump: loaded Not tainted 6.2.0+ #1
Hardware name: Dell Inc. PowerEdge R6515/04F3CJ, BIOS 2.7.3 03/31/2022
RIP: 0010:__wake_up_common+0x55/0x190
Code: 41 f6 01 04 0f 85 b2 00 00 00 48 8b 43 08 4c 8d
40 e8 48 8d 43 08 48 89 04 24 48 89 c6\
49 8d 40 18 48 39 c6 0f 84 e9 00 00 00 <49> 8b 40 18 89 6c 24 14 31
ed 4c 8d 60 e8 41 8b 18 f6 c3 04 75 5d
RSP: 0018:ffffb05a82afbba0 EFLAGS: 00010082
RAX: 0000000000000000 RBX: ffff8f9b83a00018 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffff8f9b83a00020 RDI: ffff8f9b83a00018
RBP: 0000000000000001 R08: ffffffffffffffe8 R09: ffffb05a82afbbf8
R10: 70735f7472617473 R11: 5f30307832616c71 R12: 0000000000000001
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
FS: 00007f815cf4c740(0000) GS:ffff8f9eeed80000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000010633a000 CR4: 0000000000350ee0
Call Trace:
<TASK>
__wake_up_common_lock+0x83/0xd0
qla_nvme_ls_req+0x21b/0x2b0 [qla2xxx]
__nvme_fc_send_ls_req+0x1b5/0x350 [nvme_fc]
nvme_fc_xmt_disconnect_assoc+0xca/0x110 [nvme_fc]
nvme_fc_delete_association+0x1bf/0x220 [nvme_fc]
? nvme_remove_namespaces+0x9f/0x140 [nvme_core]
nvme_do_delete_ctrl+0x5b/0xa0 [nvme_core]
nvme_sysfs_delete+0x5f/0x70 [nvme_core]
kernfs_fop_write_iter+0x12b/0x1c0
vfs_write+0x2a3/0x3b0
ksys_write+0x5f/0xe0
do_syscall_64+0x5c/0x90
? syscall_exit_work+0x103/0x130
? syscall_exit_to_user_mode+0x12/0x30
? do_syscall_64+0x69/0x90
? exit_to_user_mode_loop+0xd0/0x130
? exit_to_user_mode_prepare+0xec/0x100
? syscall_exit_to_user_mode+0x12/0x30
? do_syscall_64+0x69/0x90
? syscall_exit_to_user_mode+0x12/0x30
? do_syscall_64+0x69/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f815cd3eb97
The IOCB counts are out of order and that would block any commands from
going out and subsequently hang the system. Synchronize the IOCB count to
be in correct order. |
| In the Linux kernel, the following vulnerability has been resolved:
fscrypt: destroy keyring after security_sb_delete()
fscrypt_destroy_keyring() must be called after all potentially-encrypted
inodes were evicted; otherwise it cannot safely destroy the keyring.
Since inodes that are in-use by the Landlock LSM don't get evicted until
security_sb_delete(), this means that fscrypt_destroy_keyring() must be
called *after* security_sb_delete().
This fixes a WARN_ON followed by a NULL dereference, only possible if
Landlock was being used on encrypted files. |
| In the Linux kernel, the following vulnerability has been resolved:
erspan: do not use skb_mac_header() in ndo_start_xmit()
Drivers should not assume skb_mac_header(skb) == skb->data in their
ndo_start_xmit().
Use skb_network_offset() and skb_transport_offset() which
better describe what is needed in erspan_fb_xmit() and
ip6erspan_tunnel_xmit()
syzbot reported:
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 skb_mac_header include/linux/skbuff.h:2873 [inline]
WARNING: CPU: 0 PID: 5083 at include/linux/skbuff.h:2873 ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Modules linked in:
CPU: 0 PID: 5083 Comm: syz-executor406 Not tainted 6.3.0-rc2-syzkaller-00866-gd4671cb96fa3 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023
RIP: 0010:skb_mac_header include/linux/skbuff.h:2873 [inline]
RIP: 0010:ip6erspan_tunnel_xmit+0x1d9c/0x2d90 net/ipv6/ip6_gre.c:962
Code: 04 02 41 01 de 84 c0 74 08 3c 03 0f 8e 1c 0a 00 00 45 89 b4 24 c8 00 00 00 c6 85 77 fe ff ff 01 e9 33 e7 ff ff e8 b4 27 a1 f8 <0f> 0b e9 b6 e7 ff ff e8 a8 27 a1 f8 49 8d bf f0 0c 00 00 48 b8 00
RSP: 0018:ffffc90003b2f830 EFLAGS: 00010293
RAX: 0000000000000000 RBX: 000000000000ffff RCX: 0000000000000000
RDX: ffff888021273a80 RSI: ffffffff88e1bd4c RDI: 0000000000000003
RBP: ffffc90003b2f9d8 R08: 0000000000000003 R09: 000000000000ffff
R10: 000000000000ffff R11: 0000000000000000 R12: ffff88802b28da00
R13: 00000000000000d0 R14: ffff88807e25b6d0 R15: ffff888023408000
FS: 0000555556a61300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e5b11eb6e8 CR3: 0000000027c1b000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__netdev_start_xmit include/linux/netdevice.h:4900 [inline]
netdev_start_xmit include/linux/netdevice.h:4914 [inline]
__dev_direct_xmit+0x504/0x730 net/core/dev.c:4300
dev_direct_xmit include/linux/netdevice.h:3088 [inline]
packet_xmit+0x20a/0x390 net/packet/af_packet.c:285
packet_snd net/packet/af_packet.c:3075 [inline]
packet_sendmsg+0x31a0/0x5150 net/packet/af_packet.c:3107
sock_sendmsg_nosec net/socket.c:724 [inline]
sock_sendmsg+0xde/0x190 net/socket.c:747
__sys_sendto+0x23a/0x340 net/socket.c:2142
__do_sys_sendto net/socket.c:2154 [inline]
__se_sys_sendto net/socket.c:2150 [inline]
__x64_sys_sendto+0xe1/0x1b0 net/socket.c:2150
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f123aaa1039
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 b1 14 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffc15d12058 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f123aaa1039
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000020000040 R09: 0000000000000014
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f123aa648c0
R13: 431bde82d7b634db R14: 0000000000000000 R15: 0000000000000000 |
