| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix pdev reference leak in mtk_drm_bind()
When the device is not the mmsys master, mtk_drm_bind() returns early
after taking a reference on the disp-mutex device via
of_find_device_by_node(), without ever dropping it: mtk_drm_unbind()
only puts mutex_dev for the master. Drop the reference before returning
from the non-master path. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Fix ep kref imbalance on ADDR_CHANGE
rpcrdma_cm_event_handler() falls through to the disconnected: label
on RDMA_CM_EVENT_ADDR_CHANGE and calls rpcrdma_ep_put() with no
matching get when the event arrives before RDMA_CM_EVENT_ESTABLISHED.
The kref then underflows during connect teardown and
rpcrdma_xprt_disconnect() operates on a freed ep.
Reference counts across a normal connection lifecycle:
rpcrdma_ep_create() kref_init ->1
rpcrdma_xprt_connect() ep_get ->2 (before post_recvs)
RDMA_CM_EVENT_ESTABLISHED ep_get ->3
RDMA_CM_EVENT_DISCONNECTED ep_put ->2
rpcrdma_xprt_drain() ep_put ->1
rpcrdma_xprt_disconnect() tail ep_put ->0 (ep_destroy)
The connect-time get in rpcrdma_xprt_connect(), taken just before
rpcrdma_post_recvs() "while there are outstanding Receives," is
balanced by rpcrdma_xprt_drain. ADDR_CHANGE before ESTABLISHED has
no get to consume, so its put drops the count to 1 and the drain
put then frees the ep while rpcrdma_xprt_disconnect() still holds a
pointer to it.
Fix by dispatching on the prior re_connect_status via xchg(): for
prev == 0 (pre-ESTABLISHED) wake the connect waiter and return with
no put; for prev == 1 call rpcrdma_force_disconnect() and return.
The case-1 arm relies on the subsequent RDMA_CM_EVENT_DISCONNECTED
event -- reliably delivered when rdma_disconnect() is called on a
still-connected cm_id -- to balance the ESTABLISHED get;
rpcrdma_xprt_drain() continues to balance only that connect-time
get. Any other prior value means teardown is already in flight. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix bio accounting for split md cloned bios
Use md_cloned_bio() to control bio accounting instead of relying
on r1bio_existed in raid1 or the io_accounting flag in raid10.
The previous logic does not reliably reflect whether a bio is an
md cloned bio. When a failed bio is split and resubmitted via
bio_submit_split_bioset() on the error path, this can lead to either
double accounting for md cloned bios, or missing accounting for bios
returned from bio_submit_split_bioset()
Fix this by using md_cloned_bio() to detect md cloned bios and
skip accounting accordingly. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/adreno: Fix a reference leak in a6xx_gpu_init()
In a6xx_gpu_init(), node is obtained via of_parse_phandle().
While there was a manual of_node_put() at the end of the
common path, several early error returns would bypass this call,
resulting in a reference leak.
Fix this by using the __free(device_node) cleanup handler to
release the reference when the variable goes out of scope.
Patchwork: https://patchwork.freedesktop.org/patch/700661/ |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: Fix slab-use-after-free in qd_put
Commit a475c5dd16e5 ("gfs2: Free quota data objects synchronously")
started freeing quota data objects during filesystem shutdown instead of
putting them back onto the LRU list, but it failed to remove these
objects from the LRU list, causing LRU list corruption. This caused
use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access
already-freed objects on the LRU list.
Fix this by removing qd objects from the LRU list before freeing them in
qd_put().
Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ
XDP multi-buf programs can modify the layout of the XDP buffer when the
program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The
referenced commit in the fixes tag corrected the assumption in the mlx5
driver that the XDP buffer layout doesn't change during a program
execution. However, this fix introduced another issue: the dropped
fragments still need to be counted on the driver side to avoid page
fragment reference counting issues.
The issue was discovered by the drivers/net/xdp.py selftest,
more specifically the test_xdp_native_tx_mb:
- The mlx5 driver allocates a page_pool page and initializes it with
a frag counter of 64 (pp_ref_count=64) and the internal frag counter
to 0.
- The test sends one packet with no payload.
- On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP
buffer with the packet data starting in the first fragment which is the
page mentioned above.
- The XDP program runs and calls bpf_xdp_pull_data() which moves the
header into the linear part of the XDP buffer. As the packet doesn't
contain more data, the program drops the tail fragment since it no
longer contains any payload (pp_ref_count=63).
- mlx5 device skips counting this fragment. Internal frag counter
remains 0.
- mlx5 releases all 64 fragments of the page but page pp_ref_count is
63 => negative reference counting error.
Resulting splat during the test:
WARNING: CPU: 0 PID: 188225 at ./include/net/page_pool/helpers.h:297 mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core]
Modules linked in: [...]
CPU: 0 UID: 0 PID: 188225 Comm: ip Not tainted 6.18.0-rc7_for_upstream_min_debug_2025_12_08_11_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core]
[...]
Call Trace:
<TASK>
mlx5e_free_rx_mpwqe+0x20a/0x250 [mlx5_core]
mlx5e_dealloc_rx_mpwqe+0x37/0xb0 [mlx5_core]
mlx5e_free_rx_descs+0x11a/0x170 [mlx5_core]
mlx5e_close_rq+0x78/0xa0 [mlx5_core]
mlx5e_close_queues+0x46/0x2a0 [mlx5_core]
mlx5e_close_channel+0x24/0x90 [mlx5_core]
mlx5e_close_channels+0x5d/0xf0 [mlx5_core]
mlx5e_safe_switch_params+0x2ec/0x380 [mlx5_core]
mlx5e_change_mtu+0x11d/0x490 [mlx5_core]
mlx5e_change_nic_mtu+0x19/0x30 [mlx5_core]
netif_set_mtu_ext+0xfc/0x240
do_setlink.isra.0+0x226/0x1100
rtnl_newlink+0x7a9/0xba0
rtnetlink_rcv_msg+0x220/0x3c0
netlink_rcv_skb+0x4b/0xf0
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
____sys_sendmsg+0x1e8/0x240
___sys_sendmsg+0x7c/0xb0
[...]
__sys_sendmsg+0x5f/0xb0
do_syscall_64+0x55/0xc70
The problem applies for XDP_PASS as well which is handled in a different
code path in the driver.
This patch fixes the issue by doing page frag counting on all the
original XDP buffer fragments for all relevant XDP actions (XDP_TX ,
XDP_REDIRECT and XDP_PASS). This is basically reverting to the original
counting before the commit in the fixes tag.
As frag_page is still pointing to the original tail, the nr_frags
parameter to xdp_update_skb_frags_info() needs to be calculated
in a different way to reflect the new nr_frags. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix XDP multi-buf frag counting for legacy RQ
XDP multi-buf programs can modify the layout of the XDP buffer when the
program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The
referenced commit in the fixes tag corrected the assumption in the mlx5
driver that the XDP buffer layout doesn't change during a program
execution. However, this fix introduced another issue: the dropped
fragments still need to be counted on the driver side to avoid page
fragment reference counting issues.
Such issue can be observed with the
test_xdp_native_adjst_tail_shrnk_data selftest when using a payload of
3600 and shrinking by 256 bytes (an upcoming selftest patch): the last
fragment gets released by the XDP code but doesn't get tracked by the
driver. This results in a negative pp_ref_count during page release and
the following splat:
WARNING: include/net/page_pool/helpers.h:297 at mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core], CPU#12: ip/3137
Modules linked in: [...]
CPU: 12 UID: 0 PID: 3137 Comm: ip Not tainted 6.19.0-rc3+ #12 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_page_release_fragmented.isra.0+0x4a/0x50 [mlx5_core]
[...]
Call Trace:
<TASK>
mlx5e_dealloc_rx_wqe+0xcb/0x1a0 [mlx5_core]
mlx5e_free_rx_descs+0x7f/0x110 [mlx5_core]
mlx5e_close_rq+0x50/0x60 [mlx5_core]
mlx5e_close_queues+0x36/0x2c0 [mlx5_core]
mlx5e_close_channel+0x1c/0x50 [mlx5_core]
mlx5e_close_channels+0x45/0x80 [mlx5_core]
mlx5e_safe_switch_params+0x1a5/0x230 [mlx5_core]
mlx5e_change_mtu+0xf3/0x2f0 [mlx5_core]
netif_set_mtu_ext+0xf1/0x230
do_setlink.isra.0+0x219/0x1180
rtnl_newlink+0x79f/0xb60
rtnetlink_rcv_msg+0x213/0x3a0
netlink_rcv_skb+0x48/0xf0
netlink_unicast+0x24a/0x350
netlink_sendmsg+0x1ee/0x410
__sock_sendmsg+0x38/0x60
____sys_sendmsg+0x232/0x280
___sys_sendmsg+0x78/0xb0
__sys_sendmsg+0x5f/0xb0
[...]
do_syscall_64+0x57/0xc50
This patch fixes the issue by doing page frag counting on all the
original XDP buffer fragments for all relevant XDP actions (XDP_TX ,
XDP_REDIRECT and XDP_PASS). This is basically reverting to the original
counting before the commit in the fixes tag.
As frag_page is still pointing to the original tail, the nr_frags
parameter to xdp_update_skb_frags_info() needs to be calculated
in a different way to reflect the new nr_frags. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: hold conn in hci_connect_acl/le_sync() callbacks
There is theoretical UAF if the conn is freed while the hci_sync task
is running.
Hold refcount to avoid that. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: vub300: fix use-after-free on disconnect
The vub300 driver maintains an explicit reference count for the
controller and its driver data and the last reference can in theory be
dropped after the driver has been unbound.
This specifically means that the controller allocation must not be
device managed as that can lead to use-after-free.
Note that the lifetime is currently also incorrectly tied the parent USB
device rather than interface, which can lead to memory leaks if the
driver is unbound without its device being physically disconnected (e.g.
on probe deferral).
Fix both issues by reverting to non-managed allocation of the controller. |
| A vulnerability was determined in Eleveo Quality Management 9.7.0. Impacted is an unknown function of the file /enc-fwk-data/api/v3/conversations/<ID>/events of the component Conversation Handler. This manipulation of the argument createdBy causes dynamically-determined object attributes. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Azure Key Vault KMS provider in Kroxylicious accepts an untrusted vaultName from wire-deserialized EDEK bytes without format validation, enabling SSRF that exfiltrates the proxy's Azure bearer token to an attacker-controlled host. Token replay against the real Key Vault defeats the entire record-encryption trust model. |
| PIA's token verification (`verify_token` in `pia/oidc.py`) fetches the OIDC discovery document of an allowlisted issuer and then follows the `jwks_uri` contained in that response without parsing it as a URL, comparing it against the approved issuer's origin, or requiring HTTPS — the only check is that the field is non-empty (`pia/oidc.py:42-52`). An approved identity provider — and every registered per-project Jenkins instance under `https://ci.eclipse.org/<project>/oidc` is a separate such party (`pia/models.py`) — can therefore direct PIA to issue a GET request to an arbitrary host and port, including over plaintext `http`, from PIA's own network position. The fetch happens before any signature is verified, as a side effect of an unauthenticated `POST /v1/upload/sbom` request that is ultimately rejected with 401. |
| ApostropheCMS is an open-source Node.js content management system. From 1.0.0-beta.10 until 1.0.0-beta.13 of the AI helper, an editor with image-generation capability can create a base64-generated image record without a stored provider URL and invoke image acceptance on a deployment using local relative storage with no trusted global base URL. The server resolves the fixed uploads path against a request-controlled Host-derived origin, enabling bounded server-side requests to an attacker-selected host, port, and HTTP origin, but not arbitrary-path retrieval or the stored-provider and absolute-storage configurations. This issue is fixed in AI helper 1.0.0-beta.13. |
| Plex Media Server before 1.43.3.10861 allows an authenticated user to request arbitrary internal or external addresses via the '/video/:/transcode/universal' path parameter. |
| Plex Media Server before 1.43.3.10861 allows SSRF via '/player/timeline'. An attacker using any X-Plex-Token value can include a full URL in the 'protocol' parameter and force the Plex server to POST to the attacker's chosen destination. |
| The html_to_markdown expansion module in MISP Modules contains a server-side request forgery (SSRF) vulnerability in its is_safe_url() URL validation function. The BLOCKED_RANGES list used to reject unsafe destination addresses was incomplete, omitting several critical IP address ranges. Specifically, the following ranges were not blocked: 0.0.0.0/8 (unspecified, which routes to loopback on Linux), 100.64.0.0/10 (carrier-grade NAT per RFC 6598), ::/128 (IPv6 unspecified), fc00::/7 (IPv6 Unique Local Addresses), and fe80::/10 (IPv6 link-local). The existing list only covered IPv4 loopback (127.0.0.0/8), RFC 1918 private ranges, IPv4 link-local (169.254.0.0/16), and IPv6 loopback (::1/128).
An authenticated user with the ability to create or modify MISP attributes that trigger the html_to_markdown expansion module could supply URLs pointing to these unblocked internal address ranges. Because the module fetches the URL server-side to convert HTML content to Markdown, the request is made from the MISP server's network context. This allows an attacker to probe and read responses from internal services, carrier-grade NAT infrastructure, or link-local endpoints that would otherwise be unreachable from external networks. IPv4-mapped IPv6 forms (e.g., [::ffff:0.0.0.0]) also bypassed the existing checks.
The security impact is primarily confidentiality: an attacker can read data served by internal services reachable from the MISP server. The MISP instance itself is not compromised, but it is abused as a proxy to access otherwise restricted network resources. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fix a refcount leak in attach_perf_ctx_data()
The attach_perf_ctx_data() can race on global and !global cases. The
global case is protected by global_ctx_data_rwsem and shares a single
reference count using perf_ctx_data.global field.
But when it races with !global case, it may miss to set the global field
and result in a reference count leak.
CPU1 CPU2
----------------------------------------------------------------
attach_task_ctx_data(.global=1) attach_task_ctx_data(.global=0)
cd1 = alloc_perf_ctx_data(); cd2 = alloc_perf_ctx_data();
// { .global = 0, .refcount = 1 };
try_cmpxchg(); // success,
// task->perf_ctx_data = cd2
try_cmpxhg(); // fail; old = cd2
refcount_inc_not_zero(&old->refcount); // success
// old.refcount = 2
free_perf_ctx_data(cd1);
Then later detach_global_ctx_data() will see the data but it's not
marked as global, so it won't call detach_task_ctx_data(). |
| SolarWinds Observability Self-Hosted was found to be affected by a Server-Side Request Forgery (SSRF) vulnerability that allows authenticated attackers to cause the application server to send requests to attacker-controlled or internal destinations. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: hold asoc or transport before mod_timer() in timer handlers
Take the association or transport reference before rearming a timer in the
timer handlers.
The existing code calls mod_timer() before taking the reference needed by
the rearmed timer without holding the sock lock. This creates a race with
timer cleanup: if the timer is deleted after mod_timer() returns but before
the reference is taken, the cleanup path can drop the timer's reference and
destroy the transport or association. The timer handler then takes a
reference on the already freed object and eventually drops it, causing a
refcount underflow.
Hold the object before mod_timer() and drop the reference if mod_timer()
reports that the timer was already pending in timer handlers. Apply the
same ordering to the proto-unreachable path, which can rearm a transport
timer outside the timer handlers without holding the sock lock. |
| ColdFusion is affected by a Server-Side Request Forgery (SSRF) vulnerability that could result in privilege escalation. Exploitation of this issue does not require user interaction. Scope is changed. |
