| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: validate MOVE_RANGE destination size
F2FS_IOC_MOVE_RANGE checks the source range, but not the destination end
before updating i_size. A source hole can expose this: __clone_blkaddrs()
skips NULL_ADDR entries and returns success, so the caller can still extend
the destination inode with unchecked pos_out + len.
Reject destination overflow and use inode_newsize_ok() before extending
the destination inode. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: limit recovery filename logging to stored length
F2FS stores recovery filenames as a length plus a fixed-size i_name
buffer. The buffer is not NUL-terminated, but recover_inode() and
recover_dentry() print it with %s.
For a 255-byte filename, recovery logging can read past i_name into the
following raw inode fields.
Print the name with a precision bounded by i_namelen and F2FS_NAME_LEN. |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to clear dirty flag on folio in error path
If node block is corrupted due to chksum mismatch or inconsistent
footer info, it needs to drop clear flag of node folio, in order
to persist inconsistent node data to storage. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Add TLB flush after MES queue eviction/suspension
MES (Micro Engine Scheduler) does not perform heavy-weight TLB
invalidation after unmapping queues, unlike HWS which does this
automatically. This causes a race condition where in-flight DMA
descriptors can access memory that has been unmapped, leading to page
faults and GPU queue hangs during SVM page migration.
The issue manifests as KFDSVMRangeTest.MultiThreadMigrationTest
failures on gfx1151 (Strix Point) with XNACK mode 1 enabled - the GPU
compute queue hangs with packets submitted but never consumed.
Add kfd_flush_tlb() calls after MES queue removal in two locations:
- evict_process_queues_cpsch(): after all queues removed during eviction
- suspend_queues(): after debug/criu queue suspension (with mem_fence barrier)
This ensures all in-flight memory accesses from unmapped queues are
flushed before memory is freed or migrated.
(cherry picked from commit f5c4f88e0f9c45a8fb9dfac0c1df726c95e41b77) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix error path at svm_migrate_copy_to_ram
If page migration from device to sys ram fails for some reasons driver needs
release and unlock allocated system pages. To do that driver should use page
physical address, or pfn, then get struct page*. Current driver uses dma
address(for adev) that is not correct with IOMMU enabled, or even in general.
The patch releases and unlocks allocated system pages based on where migration
failed by struct page* of sys ram pages. Also dma_unmap correspodent system
ram pages at error path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix the case that vm range is hole at svm_migrate_copy_to_vram
When migration vm range is hole at cpu side(MIGRATE_PFN_MIGRATE set +
MIGRATE_PFN_VALID unset) driver still allocates device pages. There is no
dma map of src pages and migration. j is 0 and svm_migrate_copy_memory_gart()
will return an uninitialized r. That can trigger out_free_vram_pages to drop
all VRAM just set up.
Initialize r and only call the last svm_migrate_copy_memory_gart if j > 0.
Current code postponed the last page to the final copy. This patch flushes on
the last page when reach to the end of current drm_buddy_block; avoids another
svm_migrate_copy_memory_gart. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: unsubscribe the channel-kill event before the fence context
nouveau_channel_del() tears the fence context down first and only drops
the channel-kill subscription later, in the middle of the nvif object
teardown:
if (chan->fence)
nouveau_fence(chan->cli->drm)->context_del(chan);
...
nvif_object_dtor(&chan->vram);
nvif_event_dtor(&chan->kill);
The subscribed handler is nouveau_channel_killed(), which calls
nouveau_channel_kill() and from there nouveau_fence_context_kill() on
chan->fence. A kill event delivered in that window takes fctx->lock and
walks fctx->pending on a fence context that context_del() has already
freed.
Nothing reaches this below Fermi today, because the subscription is
gated on FERMI_CHANNEL_GPFIFO and nothing kills a channel there. On
Fermi and newer the window is real but narrow, since a kill has to land
exactly while the channel is being destroyed. That is reason enough on
its own, which is why this carries a Fixes: tag. The last patch in this
series subscribes Tesla channels as well; nothing kills those today, so
it does not widen the exposure now, but it is the groundwork for a
recovery path that would, and the ordering is better fixed before that
lands than alongside it.
Drop the subscription before anything it depends on is torn down. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_get_stackid
The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.
Note the bpf_get_stackid_pe function is executed already with
preemption disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Allow per function PCI slots to fix slot reset on s390
On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.
Currently, the pci_create_slot() assigns the same pci_slot object to
multifunction devices. This approach worked fine on s390 systems that only
exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. This creates a problem when resetting
a function through the hotplug driver's slot_reset() interface.
When attempting to reset a function through the hotplug driver, the shared
slot assignment causes the wrong function to be reset instead of the
intended one. It also leaks memory as we do create a pci_slot object for
the function, but don't correctly free it in pci_slot_release().
Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology. Since we can use all 8 bits for
slot 'number' (for ARI devices), change slot 'number' u16 to account for
special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: trusted: Fix TPM teardown ordering
trusted_tpm_exit() drops the TPM chip reference and frees the digest
array before unregistering the trusted key type. key_type_lookup()
holds key_types_sem for reading until the key operation finishes, while
unregister_key_type() takes it for writing. It therefore provides the
synchronization point that must precede backend teardown.
The current order permits this interleaving:
CPU 0 CPU 1
trusted_tpm_exit() key_type_lookup("trusted")
put_device(&chip->dev) trusted_tpm_seal()
kfree(digests) pcrlock()
unregister_key_type() tpm_pcr_extend(..., digests)
CPU 1 can consequently dereference the freed digest array. The chip can
also be released before callbacks stop using it.
KASAN reported:
BUG: KASAN: slab-use-after-free in tpm_pcr_extend+0x1f0/0x200
Read of size 2 at addr ffff88810872d000 by task poc/89
Call Trace:
tpm_pcr_extend+0x1f0/0x200
pcrlock+0x42/0x70 [trusted]
trusted_tpm_seal+0x1b6/0x570 [trusted]
trusted_instantiate+0x293/0x340 [trusted]
__key_instantiate_and_link+0xb2/0x2b0
__key_create_or_update+0x61e/0xb50
__do_sys_add_key+0x1b8/0x310
Allocated by task 88:
__kmalloc_noprof+0x1a7/0x490
do_one_initcall+0xa1/0x390
do_init_module+0x2df/0x840
Freed by task 90:
kfree+0x131/0x3c0
trusted_tpm_exit+0x59/0xa0 [trusted]
__do_sys_delete_module+0x346/0x510
Move unregister_key_type() before releasing either resource. This stops
new lookups and waits for in-flight key operations to finish before the
backend state is destroyed. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix cred UAF caused by begin_current_label_crit_section()
AppArmor's begin_current_label_crit_section() is a scary function called
from lots of LSM hooks (in particular VFS/socket-related ones) that checks
if the label referenced by the current creds is marked FLAG_STALE, and if
so, attempts to use aa_replace_current_label() to replace the creds with an
updated version that uses a new label.
The first problem with this is that it would directly lead to UAF of
`struct cred` if anything in the kernel takes a pointer to the current
creds and accesses these past a security hook invocation that replaces
creds, like so:
```
const struct cred *cred = current_cred();
alloc_file_pseudo(...);
uid_t uid = cred->euid;
```
I don't know if anything in the kernel actually does this, but I think it
is very surprising that this pattern could lead to UAF.
The second problem is that things go wrong when aa_replace_current_label()
runs with overridden credentials. aa_replace_current_label() bails out if
`current_cred() != current_real_cred()` (mirroring the check in
proc_pid_attr_write()), but this check can't actually reliably detect
overridden credentials because the overridden creds can be the same as the
objective creds.
So in approximately the following scenario, things go wrong:
1. task begins with <creds A> (as both objective and subjective creds),
with refcount=2
2. task grabs an extra reference on <creds A> for overriding
3. task calls override_creds(<creds A>), which returns a pointer to the old
subjective creds (<creds A>)
4. task enters AppArmor LSM hook
5. AppArmor checks that objective/subjective creds are equal
6. AppArmor replaces both cred pointers with <creds B> and drops 2 refs on
<creds A>
7. task leaves AppArmor LSM hook
8. task calls revert_creds(<creds A>)
9. now task->cred is <creds A> while task->real_cred is <creds B>, but the
task_struct logically holds two references to <creds B>
10. another task drops the extra reference on <creds A> that was used for
overriding, refcount drops to 0
11. now task->real_cred points to freed creds
At this point, any access to current_cred() will be UAF.
I have a test case where I run aa-disable on a profile while a process
using that profile is blocked on splice() from a FUSE passthrough file into
a full pipe; after the profile update, the pipe becomes empty, splice()
resumes, the credentials go out of sync, and a subsequent getuid() syscall
results in a KASAN UAF splat.
To fix this, instead of directly replacing creds, do it via task_work that
will run at the end of the current syscall. (The point in time at which the
cred replacement happens should have no correctness impact; it is just a
performance optimization to avoid unnecessarily touching the refcount of
the new label.)
Note that AppArmor still performs direct cred replacements in the
sb_pivotroot LSM hook after this change, and that direct cred replacements
can still happen in VFS ->write() callbacks via proc_pid_attr_write().
There are two options for what to do with aa_dup_task_ctx(): Either
explicitly reset new->label_replacement_pending after the entire
aa_task_ctx has been copied, or switch to manually copying members over.
I am switching to manually copying members over because that should make
bugs more obvious. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix out-of-bounds write when null terminating a label vec
aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE
is passed. If the components are all distinct no duplicates are dropped,
dups is 0 and the terminator goes to vec[n], so the caller has to provide
room for n + 1 entries.
aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len,
gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but
vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES
it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it
allocates exactly len pointers. The terminator therefore lands one entry
past the end of the local array when len is LOCAL_VEC_ENTRIES, and one
entry past the end of the allocation when len is larger.
len comes from the number of "//&" separated components in the label name
and label_count_strn_entries() does not bound it. An unprivileged task
reaches the parse by writing to /proc/self/attr/apparmor/current or through
lsm_set_self_attr(2), both of which go through do_setattr(), and the name
is parsed before the change_profile permission is checked.
The query_label() path behind the securityfs .access file, which is
mode 0666, performs no permission check at all. Every component has to
resolve to a loaded profile, so a system with policy loaded is required.
The other two VEC_FLAG_TERMINATE users work on a label vec that
aa_label_alloc() has already sized with "+ 1 for null terminator entry on
vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing
len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of
the local array and into kzalloc(). |
| In the Linux kernel, the following vulnerability has been resolved:
device property: fix infinite loop in fwnode_for_each_child_node()
When iterate over children of a fwnode that has a secondary fwnode,
fwnode_get_next_child_node() can enter an infinite loop if the secondary
fwnode has more than one child.
Parent Child
(Primary fwnode) FWa: {FWa1, FWa2, FWa3}
(Secondary fwnode) FWb: {FWb1, FWb2}
In this case:
┌─> fwnode_get_next_child_node(FWa, FWa1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa1) returns FWa2
│
│ ...
│
│ fwnode_get_next_child_node(FWa, FWa3)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWa3) returns NULL
│ - fwnode_call_ptr_op(FWb, get_next_child_node, FWa3) returns FWb1
│
│ fwnode_get_next_child_node(FWa, FWb1)
│ - fwnode_call_ptr_op(FWa, get_next_child_node, FWb1) returns FWa1
└────┘
This cause fwnode_for_each_child_node() to loop indefinitely, reapeatedly
output {FWa1, FWa2, FWa3, FWb1, FWa1, ...}.
The root cause is that when the current child (FWb1) belongs to the
secondary fwnode, calling get_next_child_node() on the parimary fwnode
incorrectly returns the first child (FWa1) again instead of NULL.
Fix this by dynamically checking the parent fwnode of the current child
before calling get_next_child_node(). This approach follows the pattern
established in commit b5b41ab6b0c1 ("device property: Check
fwnode->secondary in fwnode_graph_get_next_endpoint()"). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: at91_udc: drain polled-VBUS timer/work before udc is freed
In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a
self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and
at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via
mod_timer(). Both recover the same udc through container_of and dereference
it on every iteration.
Neither teardown path cancels this cycle. udc is devm-allocated, so it is
freed after at91udc_remove() returns, and is likewise freed when probe
fails and devres runs. A timer callback or work item that is pending or
running at either point dereferences the freed udc.
Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and
from the usb_add_gadget_udc() failure path in probe; the remaining probe
error paths fail before the timer is armed. timer_shutdown_sync() waits
for a running callback and clears timer->function, which makes the work
handler's mod_timer() a permanent no-op; cancel_work_sync() then drains
any pending or running work whose re-arm attempt now does nothing. The
timer must be shut down first, since cancelling the work alone would let
the timer re-queue it. The guard mirrors probe: in IRQ mode the timer and
work_struct are never initialized.
This does not require a fault; a normal driver unbind can interleave with
an already queued work item.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd, nfsd: RCU-protect nlmsvc_ops dispatch
nlmsvc_ops is published by nfsd_lockd_init() and cleared by
nfsd_lockd_shutdown() with plain stores, while lockd dereferences
it unguarded from dispatch sites in fs/lockd/svcsubs.c. The pointer
targets nfsd's .rodata and the fopen/fclose callbacks live in nfsd's
.text, so a stale load after rmmod nfsd results in either a NULL
deref or a module-text use-after-free.
Declare nlmsvc_ops as __rcu, publish via rcu_assign_pointer(), clear
via RCU_INIT_POINTER() + synchronize_rcu(). Add a struct module
*owner field to nlmsvc_binding and pin the module across indirect
calls with try_module_get/module_put. When the binding is torn down,
fall back to fput() to avoid leaking struct file references. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: release path refs on follow_down() error
nfsd_cross_mnt() initializes a local struct path with mntget() and
dget() before calling follow_down(). On a negative return the error
arm jumps to out without releasing those references:
err = follow_down(&path, follow_flags);
if (err < 0)
goto out;
follow_down() never drops the caller's entry-time refs on any error
sub-case; for example a pre-cross d_manage() failure leaves path
untouched, so the mntget()/dget() taken on entry survive the call.
Every other early-exit arm in nfsd_cross_mnt() (other-namespace
return, IS_ERR(exp2), and the success tail after the swap) already
calls path_put(&path); the err < 0 arm is the lone omission. The
leak inflates mnt_count and d_count on each failed cross-mount,
blocking umount and pinning dentries against the shrinker, and is
reachable by any authenticated NFS client through nfsd_lookup_dentry
or the NFSv4 READDIR encode path.
Fix by calling path_put(&path) before the goto out in the err < 0
arm so the entry-time refs are released on all follow_down() error
returns. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: check nfsd4_acl_to_attr() return value in nfsd4_create()
nfsd4_create() stores the return value of nfsd4_acl_to_attr() in
status, but the switch(create->cr_type) block unconditionally
overwrites it in every branch. ACL translation errors are silently
discarded, and the CREATE proceeds without the requested ACL.
Add an early exit check after nfsd4_acl_to_attr(), matching the
pattern already used in nfsd4_setattr().
[ cel: prefer NFS4ERR_BADTYPE over NFS4ERR_ATTRNOTSUPP ] |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix clock domain mismatch in clients_still_reclaiming()
clients_still_reclaiming() computes a deadline from nn->boot_time
(CLOCK_REALTIME, ~1.7 billion) but compares it against
ktime_get_boottime_seconds() (CLOCK_BOOTTIME, seconds since boot).
The comparison is always false — it would take ~54 years of uptime
for BOOTTIME to exceed the REALTIME-derived deadline.
This means any client can hold the server in grace indefinitely by
sending CLAIM_PREVIOUS OPEN requests, blocking all non-reclaim
operations for all other clients.
Add boot_time_bt (CLOCK_BOOTTIME) alongside the existing boot_time
and use it for the deadline computation. boot_time (CLOCK_REALTIME)
is preserved for its cl_boot clientid-nonce role. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix fcache_disposal UAF by inlining dispose state into nfsd_net
nfsd_file_dispose_list_delayed() defers fput() to nfsd service threads
via a per-net freeme queue, preventing the shrinker and GC worker from
bearing the cost of closing files (see ffb402596147). However, the
queue lives in a separately-allocated struct nfsd_fcache_disposal that
is freed by nfsd_free_fcache_disposal_net() during per-net teardown.
The global shrinker, laundrette, and fsnotify callbacks can still be
inside nfsd_file_dispose_list_delayed() dereferencing that pointer,
causing a use-after-free.
Inline the spinlock and freeme list directly into struct nfsd_net (as
fcache_dispose_lock and fcache_dispose_list), eliminating the separately
allocated struct nfsd_fcache_disposal entirely. These fields now have
the same lifetime as the net namespace itself, so there is no dangling
pointer to chase.
nfsd_file_cache_start_net() now just initializes the inline fields and
cannot fail due to allocation. nfsd_file_cache_shutdown_net() drains
the inline list directly instead of freeing a separate struct. The
alloc/free helpers are removed. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix nfsd_file leak on inter-server COPY setup failure
When nfsd4_setup_inter_ssc() fails, nfsd4_copy() returns
nfserr_offload_denied directly, bypassing the out: label where
release_copy_files() would drop the nf_dst reference taken by
nfs4_preprocess_stateid_op(). Each failed inter-server COPY
leaks one nfsd_file, pinning file/inode/dentry/vfsmount.
Fix by setting status and jumping to out: instead of returning
directly. |
