| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In ip_stack, there is a possible out of bounds read due to improper input validation. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01387180; Issue ID: MSV-5152. |
| In Modem, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: MOLY01320076; Issue ID: MSV-6889. |
| In Modem, there is a possible way (for XXX) to XXXXX due to an integer overflow. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01334054 / MOLY01312486; Issue ID: MSV-7920. |
| secp256k1-native is a native C secp256k1 implementation for Ruby. In affected native builds, native constant-time scalar multiplication through `Point#mul` or `scalar_multiply_ct` can leak timing information about a secret scalar when compiled by a toolchain that reconstructs branchless selection into a branch. The `Montgomery ladder` uses `uint256_select` with an all-zeros or all-ones mask, but affected GCC builds at `-O2` recover the original condition and emit secret-dependent `je` or `jne` jumps whose timing correlates with scalar bits. This defeats the assumption behind the 0.17.0 `jp_add_internal` infinity-branch fix. A consumer must multiply a secret private key or nonce in a context where an attacker can observe timing; repeated measurements can statistically recover scalar bits. The defect is in the compiled binary, so source review or `ctgrind` on a non-reconstructing toolchain may miss it. GCC 14.3.0, 15.1.0, and 15.2.0 reproduced the branch reconstruction, and `extconf.rb` appends `-O2`. Tested GCC versions through 12.4.0 used bitwise operations and GCC 13.3.0 used constant-time `cmov`; the pure-Ruby path is not affected by this flaw and separately makes no constant-time claim. GCC 16 and clang were untested, and point releases, targets, and flag combinations were not exhaustively bisected. `Earlier pre-0.17.0 versions had different constant-time issues rather than this introduced select idiom.` Version 0.18.0 contains the verified fix. The advisory's broad pre-0.18.0 guidance also covers earlier, different constant-time issues; whether this CVE groups those issues or only the select idiom introduced in 0.17.0 remains unresolved. |
| Coop is an open source review and moderation tool from ROOST. Prior to 1.0.2, `addAccessibleQueuesForUser` and `removeAccessibleQueuesForUser` accepted arbitrary `queueId` and `userId` values without organization scoping. An authenticated user belonging to one organization and holding MRT queue-edit permission could grant or revoke another organization's users' access to manual review queues. The existing queue-edit permission check did not bind the supplied identifiers to the caller's organization. The attacker could not read the other organization's queues or jobs, so this issue did not disclose confidential data. This issue is fixed in version 1.0.2. |
| OpenSearch SQL supports querying OpenSearch data using SQL and Piped Processing Language. In the 2.x line from 2.8.0.0 until 2.19.6.0, and the 3.x line prior to 3.7.0.0, a remote authenticated user with basic read/search permissions can provide a crafted `cursor` parameter to the `plugins/sql` endpoint and trigger unsafe deserialization of untrusted data, resulting in arbitrary code execution on the server. This issue is fixed in repository releases 2.19.6.0 and 3.7.0.0. |
| Refitter is a tool for generating a C# REST API client using the Refit library. Prior to 2.1.2, the header parameter name in `parameters[].name` with `in: header` is emitted verbatim into a Refit `[Header("<name>")]` attribute string without escaping quotation marks. An attacker-influenced OpenAPI description can pass default validation without `--skip-validation` and break out from the parameter-list position by closing the parameter and method syntax, attribute, interface, and namespace. The generated file can remain valid C# while containing a top-level file class with a `[ModuleInitializer]` method, which executes attacker code when the compiled assembly is loaded at application startup, even if the client is never called. Query `AliasAs` and enum/default value sinks are escaped; this flaw is in header-name attribute-string emission. The behavior was verified with Refitter 2.0.0 and .NET 8. This issue is fixed in version 2.1.2. |
| Refitter is a tool for generating a C# REST API client using the Refit library. Prior to 2.1.1, the `refitter` dotnet tool invokes `NJsonSchema` with unsafe defaults for `$ref` resolution when generating Refit interfaces and contracts from attacker-controlled or attacker-influenced OpenAPI descriptions. Remote `http(s)` references cause requests from the developer or CI host and inline untrusted remote schema content into generated output. Absolute local file paths and relative `../` traversal outside the input directory also resolve and inline local content, permitting arbitrary local-file disclosure. The demonstrated chain stops at server-side request forgery, remote file inclusion, and local file inclusion, not code execution: Refit sets the base URL at runtime, enum values use verbatim-string doubling, and string defaults are escaped. This issue is fixed in version 2.1.1. |
| libriscv is a RISC-V sandbox and emulator. Prior to 1.18, a crafted ELF binary can cause out-of-bounds reads in the host emulator. `Memory<W>::binary_loader` checks `PT_LOAD` program-header bounds, but `Memory<W>::serialize_execute_segment` trusts section-header `sh_offset` and `sh_size` when locating `.text` without verifying the file range against `m_binary.size()`; `Memory<W>::lookup()` has a similar section-table problem. Malformed `.text` or `.symtab` offsets can therefore bypass the program-header checks and point outside the binary buffer, crashing rvlinux. With suitable memory layout or integer overflow, out-of-buffer host heap memory may instead be mapped into the guest by `create_execute_segment()`, potentially exposing host memory. The reported reproducer demonstrates a host SIGSEGV, while memory disclosure through grooming is described as possible rather than demonstrated. This issue is fixed in version 1.18. |
| SNARK Verifier is a generic (S)NARK verifier. Prior to 0.2.5, the Halo 2 aggregation circuit can mishandle proof points encoded as the point at infinity. `EcPointLoader::multi_scalar_multiplication` places a `Value::Assigned(_)` base paired with `Value::Constant(ONE)` into its unscaled variable-base list and passes it directly to `sum_with_const`. The default shim delegates to halo2-lib `EccChip::sum`, whose incomplete affine addition assumes nonidentity input points. A prover-controlled proof point encoded as `(0, 0)` can therefore enter the final aggregation sum through the scalar-one shortcut and affect the MSM or accumulator computation. Practical exploitability depends on the surrounding aggregation and final-decider checks; the advisory does not establish universal acceptance of invalid proofs. This issue is fixed in version 0.2.5. |
| ag-psd is a JavaScript library for reading and writing Photoshop Document files. Before the allocation-limit remediation attempt in version 31.0.0, `readPsd()` commits image and layer buffers from attacker-declared PSD geometry before validating the declarations against the actual available data or sane allocation limits. The `psdReader.js` implementation sizes off-heap typed arrays using `width`, `height`, `channels`, `depth` and `per-layer rectangles`, so a tiny PSD declaring enormous geometry can force multi-gigabyte memory allocation before a later bounds error. The reported 52-byte input on Node 24 produced approximately 3.17 GB peak RSS before a RangeError; under memory pressure the process can be terminated before the error can be caught, and concurrent inputs can exhaust memory. Services reading untrusted PSDs are exposed to denial of service. This differs from genuinely large PSD files whose memory demand is proportional to real input content. Version 31.0.0 adds a composite-image allocation limit, but complete coverage of the separately described layer-rectangle allocation path is not established and requires curator residual/scope review. |
| LubeLogger is a self-hosted, open-source, web-based vehicle maintenance and fuel mileage tracker. Prior to 1.6.8, `PrintRecordStickers` in `/Controllers/VehicleController.cs` checks through `CollaboratorFilter` that the authenticated caller can view the supplied `vehicleId`, but fetches caller-supplied `recordIds` without checking that each record's `VehicleId` belongs to the authorized vehicle. An authenticated user can submit `POST /Vehicle/PrintRecordStickers` with an authorized `vehicleId`, enumerate other users' integer record IDs and select an `ImportMode` to retrieve records across the service, gas, repair, upgrade, tax, supply, note, odometer, reminder, plan, inspection and equipment stores. Returned information includes descriptions, costs, notes, mileage, extra fields and file attachment metadata, allowing cross-user disclosure of vehicle maintenance records. This issue is fixed in version 1.6.8. |
| sevenz-rust2 is a Rust-native 7z compressor and `decompress`or. Prior to 0.21.1, extracting an attacker-supplied 7z archive can write or overwrite files outside the destination directory. In `src/util/decompress.rs`, `decompress_impl` computes each destination with `dest.join(entry.name())` without normalizing the archive's UTF-16 entry name or verifying containment, and `default_entry_extract_fn` writes to it with `File::create`. Parent-directory components escape the extraction root, and an absolute entry path makes the join discard the destination entirely. The convenience entry points `decompress`, `decompress_file`, `decompress_with_password`, and `decompress_file_with_password` all use this default path. Overwriting writable configuration, startup, cron, or build files can lead to code execution or persistence. The archive bytes are the attacker-controlled trust boundary, including for applications that automatically unpack uploaded or otherwise untrusted archives. This issue is fixed in version 0.21.1. |
| A firmware verification vulnerability in Creative Sound
Blaster Katana could allow an attacker to modify a legitimate firmware image
and upload the modified firmware to an affected device. |
| LORIS (Longitudinal Online Research and Imaging System) is a self-hosted web application that provides data- and project-management for neuroimaging research. In versions from 22.0.0 prior to 27.0.4 and from 28.0.0 prior to 28.0.2, the `API` for the `imaging_browser` module permits edits to imaging data without checking the frontend permissions that restrict editing in Imaging Browser. An authenticated `API` caller can therefore modify imaging data without the required edit authorization. Deployments that no longer use the `API` can disable it to remove access to this endpoint. This issue is fixed in versions 27.0.4 and 28.0.2. |
| Arc is an open, SQL-native time-series database for telemetry. Prior to the repository-verified 26.06.2 repair, the remediation of `CVE-2026-47735` leaves a cross-database authorization bypass through DuckDB table-valued I/O functions. In `internal/database/sandbox.go`, `allowed_directories` uses `cfg.LocalStorageRoot`, configured by `storage.local_path`, while `enable_external_access=false` blocks access outside that entire multi-tenant root. `GetStoragePath` in `internal/storage/util.go` stores all databases beneath it. In `internal/api/query.go`, `extractTableReferences` skips names followed by an opening parenthesis and `checkQueryPermissions` allows queries with no extracted table references, including tokens with `permissions: []`. The `userSQLReadParquetPattern` denylist catches literal `read_parquet(` and the earlier protection also blocks `arc_partition_agg(`, but misses the `parquet_scan` alias and `glob`, `parquet_metadata`, `parquet_schema`, `read_blob`, `read_csv_auto`, `read_json` and `read_text`. A request to `POST /api/v1/query` using these unblocked functions passes `ValidateSQLRequest` and `convertSQLToStoragePaths` without tenant authorization, allowing reads and enumeration of other databases' time-series data, schema and per-column value-range statistics within the allowlisted root. The sandbox still blocks out-of-root OS files and HTTP SSRF, and the sibling SQLite token database outside the root is not exposed by this mechanism. The earlier 26.06.1 remediation does not comprehensively deny these I/O functions. Repository tag 26.06.2 contains the I/O-function repair and supplies the provisional remediation boundary; conflicting advisory affected-version statements require curator adjudication. |
| In Modem, there is a possible application crash due to a logic error. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01416152; Issue ID: MSV-7924. |
| In Modem, there is a possible escalation of privilege due to a missing permission check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: MOLY01790985; Issue ID: MSV-8148. |
| In Modem, there is a possible out of bounds read due to an integer overflow. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01755742; Issue ID: MSV-8896. |
| In Modem, there is a possible out of bounds read due to a missing bounds check. This could lead to remote denial of service, if a UE has connected to a rogue base station controlled by the attacker, with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: MOLY01758223; Issue ID: MSV-8909. |
