| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
audit: fix incorrect inheritable capability in CAPSET records
__audit_log_capset() records the effective capability set into the
inheritable field due to a copy-paste error. Every CAPSET audit
record therefore reports cap_pi (process inheritable) with the value
of cap_effective instead of cap_inheritable.
This silently corrupts audit data used for compliance and forensic
analysis: an attacker who modifies inheritable capabilities to
prepare for a privilege-escalating exec would have the change masked
in the audit trail.
The bug has been present since the original introduction of CAPSET
audit records in 2008. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix double free and use-after-free in aux device error paths
When auxiliary_device_add() fails in idpf_plug_vport_aux_dev() or
idpf_plug_core_aux_dev(), the err_aux_dev_add label calls
auxiliary_device_uninit() and falls through to err_aux_dev_init. The
uninit call will trigger put_device(), which invokes the release
callback (idpf_vport_adev_release / idpf_core_adev_release) that frees
iadev. The fall-through then reads adev->id from the freed iadev for
ida_free() and double-frees iadev with kfree().
Free the IDA slot and clear the back-pointer before uninit, while adev
is still valid, then return immediately.
Commit 65637c3a1811 ("idpf: fix UAF in RDMA core aux dev deinitialization")
fixed the same use-after-free in the matching unplug path in this file but
missed both probe error paths. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Wrap DCN32 phantom-plane allocation in DC_RUN_WITH_PREEMPTION_ENABLED
[Why]
dcn32_validate_bandwidth() wraps dcn32_internal_validate_bw() with
DC_FP_START()/DC_FP_END(). In x86 non-RT, DC_FP_START takes fpregs_lock(),
which disables local softirqs.
The DML1 path through dcn32_enable_phantom_plane() calls kvzalloc() to
allocate ~335 KiB for dc_plane_state. This triggers the vmalloc path,
which calls BUG_ON(in_interrupt()) because it's invoked within the
FPU-enabled (softirq disabled) region, leading to a kernel crash.
[How]
Wrap the dc_state_create_phantom_plane() call with the
DC_RUN_WITH_PREEMPTION_ENABLED() macro to allow preemption during
this memory allocation.
(cherry picked from commit 885ccbef7b94a8b38f69c4211c679021aa27ad11) |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/amd: Bounds-check devid in __rlookup_amd_iommu()
iommu_device_register() walks every device on the PCI bus via
bus_for_each_dev() and calls amd_iommu_probe_device() for each. The
inlined check_device() path computes the device's sbdf, calls
rlookup_amd_iommu() to find the owning IOMMU, and only afterwards
verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes
rlookup_table[devid] with no bounds check of its own, so for a PCI
device whose BDF is not described by the IVRS, the lookup reads past
the end of the allocation before the caller's bounds check can run.
This was harmless before commit e874c666b15b ("iommu/amd: Change
rlookup, irq_lookup, and alias to use kvalloc()"): the table was a
zeroed page-order allocation, so the over-read returned NULL and the
caller's NULL check skipped the device. After that commit the table is
a tight kvcalloc() and the over-read returns adjacent slab contents,
which check_device() then dereferences as a struct amd_iommu *,
causing a boot-time GPF.
Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS
describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at
00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation,
into the adjacent kmalloc-512 slab object:
pci 0000:00:04.0: Adding to iommu group 0
pci 0000:00:05.0: Adding to iommu group 1
pci 0000:00:06.0: Adding to iommu group 2
pci 0000:00:07.0: Adding to iommu group 3
Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025
RIP: 0010:amd_iommu_probe_device+0x54/0x3a0
Call Trace:
__iommu_probe_device+0x107/0x520
probe_iommu_group+0x29/0x50
bus_for_each_dev+0x7e/0xe0
iommu_device_register+0xc9/0x240
iommu_go_to_state+0x9c0/0x1c60
amd_iommu_init+0x14/0x40
pci_iommu_init+0x16/0x60
do_one_initcall+0x47/0x2f0
Guard the array access in __rlookup_amd_iommu(). With the fix applied
on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gma500/oaktrail_lvds: fix hang on init failure
The LVDS init code looks up an I2C adapter using i2c_get_adapter() and
tries to read the EDID before falling back to allocating and registering
its own adapter.
The error handling does not separate these cases so on a late init
failure it will try to deregister and free also an adapter that had
previously been registered. Since i2c_get_adapter() takes another
reference to the adapter, deregistration hangs indefinitely while
waiting for the reference to be released.
Fix this by only destroying adapters allocated during LVDS init on
errors. |
| In the Linux kernel, the following vulnerability has been resolved:
arm_mpam: Check whether the config array is allocated before destroying it
__destroy_component_cfg() is called to free the configuration array.
It uses the embedded 'garbage' structure, which means the array has
to be allocated.
If __destroy_component_cfg() is called from mpam_disable() before the
configuration was ever allocated, then a NULL pointer is dereferenced.
Check for this case and return early if the configuration is not
allocated.
__destroy_component_cfg() also frees the mbwu_state as this is allocated
by __allocate_component_cfg(). As the mbwu_state is allocated after
comp->cfg is set, and is also under mpam_list_lock, only the first
pointer needs checking. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix sleep-inside-lock in __smc_setsockopt() causing local DoS
A logic flaw in __smc_setsockopt() allows a local unprivileged user to
cause a Denial of Service (DoS) by holding the socket lock indefinitely.
The function __smc_setsockopt() calls copy_from_sockptr() while holding
lock_sock(sk). By passing a userfaultfd-monitored memory page (or
FUSE-backed memory on systems where unprivileged userfaultfd is disabled)
as the optval, an attacker can halt execution during the copy operation,
keeping the lock held.
Combined with asynchronous tear-down operations like shutdown(), this
exhausts the kernel wq (kworkers) and triggers the hung task watchdog.
[ 240.123456] INFO: task kworker/u8:2 blocked for more than 120 seconds.
[ 240.123489] Call Trace:
[ 240.123501] smc_shutdown+...
[ 240.123512] lock_sock_nested+...
This patch moves the user-space copy outside the lock_sock() critical
section to prevent the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix use-after-free on sbi->sync_decompress
z_erofs_decompress_kickoff() can race with filesystem unmount, causing
a use-after-free on sbi->sync_decompress.
When I/O completes, z_erofs_endio() calls z_erofs_decompress_kickoff()
to queue z_erofs_decompressqueue_work() asynchronously. Then, after all
folios are unlocked, unmount workflow can proceed and sbi will be freed
before accessing to sbi->sync_decompress.
Thread (unmount) I/O completion kworker
queue_work
z_erofs_decompressqueue_work
(all folios are unlocked)
cleanup_mnt
..
erofs_kill_sb
erofs_sb_free
kfree(sbi)
access sbi->sync_decompress // UAF!! |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: add mutex to guard hook reference counting
As the synproxy infrastructure register netfilter hooks on-demand when a
user adds the first iptables target or nftables expression, if done
concurrently they can race each other.
Introduce a mutex to serialize the refcount control blocks access from
both frontends. While a per namespace mutex might be more efficient, it
is not needed for target/expression like SYNPROXY. |
| In the Linux kernel, the following vulnerability has been resolved:
6lowpan: fix off-by-one in multicast context address compression
The second memcpy in lowpan_iphc_mcast_ctx_addr_compress() uses
&data[1] as destination and &ipaddr->s6_addr[11] as source, but
both should be offset by one: &data[2] and &ipaddr->s6_addr[12]
respectively.
This off-by-one has two consequences:
1. data[1] is overwritten with s6_addr[11], corrupting the RIID
field in the compressed multicast address
2. data[5] is never written, so uninitialized kernel stack memory
is transmitted over the network via lowpan_push_hc_data(),
leaking kernel stack contents
The correct inline data layout must match what the decompression
function lowpan_uncompress_multicast_ctx_daddr() expects:
data[0..1] = s6_addr[1..2] (flags/scope + RIID)
data[2..5] = s6_addr[12..15] (group ID)
Also zero-initialize the data array as a defensive measure against
similar bugs in the future. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: Release nested relation on devlink free
devlink relation state is normally released from devl_unregister(), which
calls devlink_rel_put(). This misses devlink instances that get a nested
relation before registration and then fail probe before devl_register() is
reached.
That flow can happen for SFs. The child devlink gets linked to its
parent before registration, then a later probe error calls devlink_free()
directly. Since the instance was never registered, devl_unregister() is not
called and devlink->rel is leaked.
Release any pending relation from devlink_free() as well. The registered
path is unchanged because devl_unregister() already clears devlink->rel
before devlink_free() runs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: fix leak if split 6 GHz scanning fails
rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's
supposed to be released at ___cfg80211_scan_done() but this doesn't happen
as rdev->scan_req is NULL at that point, too, leading to the early return
from the freeing function.
unreferenced object 0xffff8881161d0800 (size 512):
comm "wpa_supplicant", pid 379, jiffies 4294749765
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................
backtrace (crc c867fdb6):
kmemleak_alloc+0x89/0x90
__kmalloc_noprof+0x2fd/0x410
cfg80211_scan+0x133/0x730
nl80211_trigger_scan+0xc69/0x1cc0
genl_family_rcv_msg_doit+0x204/0x2f0
genl_rcv_msg+0x431/0x6b0
netlink_rcv_skb+0x143/0x3f0
genl_rcv+0x27/0x40
netlink_unicast+0x4f6/0x820
netlink_sendmsg+0x797/0xce0
__sock_sendmsg+0xc4/0x160
____sys_sendmsg+0x5e4/0x890
___sys_sendmsg+0xf8/0x180
__sys_sendmsg+0x136/0x1e0
__x64_sys_sendmsg+0x76/0xc0
x64_sys_call+0x13f0/0x17d0
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: enforce HE/EHT cap/oper consistency
Xiang Mei reports that mac80211 could crash if eht_cap is set
but eht_oper isn't. Rather than fixing that for the individual
user(s), enforce that both HE/EHT have consistent elements. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: validate advertising TLV before type checks
tlv_data_is_valid() reads each advertising data field length from
data[i], then inspects data[i + 1] for managed EIR types before
checking that the current field still fits inside the supplied buffer.
A malformed field whose length byte is the last byte of the buffer can
therefore make the parser read one byte past the advertising data.
KASAN reported the following when a malformed MGMT_OP_ADD_ADVERTISING
request reached that path:
BUG: KASAN: vmalloc-out-of-bounds in tlv_data_is_valid()
Read of size 1
Call trace:
tlv_data_is_valid()
add_advertising()
hci_mgmt_cmd()
hci_sock_sendmsg()
Move the existing element-length check before any type-octet inspection
so each non-empty element is proven to contain its type byte before the
parser looks at data[i + 1]. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: fix memory leak in error path of hci_alloc_dev()
Early failures in Bluetooth HCI UART configuration leak SRCU percpu
memory.
When device initialization fails before hci_register_dev() completes,
the HCI_UNREGISTER flag is never set. As a result, when the device
reference count reaches zero, bt_host_release() evaluates this flag as
false and falls back to a direct kfree(hdev).
Because hci_release_dev() is bypassed, the SRCU struct initialized
early in hci_alloc_dev() is never cleaned up, resulting in a leak of
percpu memory.
Fix the leak by explicitly calling cleanup_srcu_struct() in the
fallback (unregistered) branch of bt_host_release() before freeing
the device. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: Fix not releasing hdev reference on iso_conn_big_sync
hci_get_route() returns a reference-counted hci_dev pointer via
hci_dev_hold(). The function exits normally or with an error without ever
releasing it. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: restrict IPOPT_SSRR and IPOPT_LSRR options
This patch restricts setting Loose Source and Record Route (LSRR)
and Strict Source and Record Route (SSRR) IP options to users
with CAP_NET_RAW capability.
This prevents unprivileged applications from forcing packets to route
through attacker-controlled nodes to leak TCP ISN and possibly other
protocol information.
While LSRR and SSRR are commonly filtered in many network environments,
they may still be supported and forwarded along some network paths.
RFC 7126 (Recommendations on Filtering of IPv4 Packets Containing
IPv4 Options) recommend to drop these options in 4.3 and 4.4. |
| In the Linux kernel, the following vulnerability has been resolved:
net/802/mrp: fix vector attribute parsing in mrp_pdu_parse_vecattr
In mrp_pdu_parse_vecattr(), vector attribute events are encoded three
per byte and valen tracks the number of events left to process.
The parser decrements valen after processing the first and second events
from each event byte, but not after processing the third one. When valen
is exactly a multiple of three, the loop continues after the last valid
event and consumes the next byte as a new event byte, applying a
spurious event to the MRP applicant state.
Additionally, when valen is zero the parser unconditionally consumes
attrlen bytes as FirstValue and advances the offset, even though per
IEEE 802.1ak a VectorAttribute with only a LeaveAllEvent has valen of
zero and no FirstValue or Vector fields. This corrupts the offset for
subsequent PDU parsing.
Also, when valen exceeds three the loop crosses byte boundaries but
the attribute value is not incremented between the last event of one
byte and the first event of the next. This causes the first event of
the next byte to use the same attribute value as the third event
rather than the next consecutive value.
Decrement valen after processing the third event, skip FirstValue
consumption when valen is zero, and increment the attribute value at
the end of each loop iteration. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: dummy: fix UMP event stack overread
The dummy sequencer port forwards events by copying an incoming
struct snd_seq_event into a stack temporary, rewriting source and
destination, and dispatching the temporary to subscribers. That legacy
event storage is smaller than struct snd_seq_ump_event.
When a UMP event reaches the dummy client, the copy leaves the UMP flag
set but only provides legacy-sized stack storage. The subscriber
delivery path then uses snd_seq_event_packet_size() and copies a
UMP-sized packet from that stack object, reading past the end of the
temporary.
Use the existing union __snd_seq_event storage and copy the packet size
reported for the incoming event before rewriting the common routing
fields. This preserves the full UMP packet for UMP events while keeping
legacy event handling unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
netlabel: validate unlabeled address and mask attribute lengths
netlbl_unlabel_addrinfo_get() used the address attribute length to
determine whether the attribute data could be read as an IPv4 or IPv6
address, but did not independently validate the corresponding mask
attribute length. A crafted Generic Netlink request could therefore
provide a valid IPv4/IPv6 address attribute with a shorter mask
attribute, which would later be read as a full struct in_addr or
struct in6_addr.
NLA_BINARY policy lengths are maximum lengths by default, so use
NLA_POLICY_EXACT_LEN() for the unlabeled IPv4/IPv6 address and mask
attributes. This rejects short attributes during policy validation and
also exposes the exact length requirements through policy introspection. |
