| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
KEYS: Fix key_reject_and_link() race with keyring restriction
The restrict_link check in key_reject_and_link() is done before taking
the keyring semaphore, racing with a concurrent keyring_restrict()
that installs the restriction while holding the semaphore in write
mode.
Move the check to after __key_link_lock(), so it is done under the
semaphore, matching the pattern used in __key_create_or_update(). |
| In the Linux kernel, the following vulnerability has been resolved:
pid_namespace: prevent TIF_NOTIFY_SIGNAL from interrupting the reaper
Since commit 7fea700e04bd ("zap_pid_ns_processes: clear
TIF_NOTIFY_SIGNAL along with TIF_SIGPENDING") zap_pid_ns_processes()
clears TIF_NOTIFY_SIGNAL before every kernel_wait4() call. Otherwise
kernel_wait4() doesn't sleep and returns -ERESTARTSYS if
signal_pending() is true and the reaper busy-waits.
But clearing TIF_NOTIFY_SIGNAL doesn't fix it. It can get raised again.
For example, klp_send_signals() sets it raw against any task that hasn't
transitioned yet. And it keeps sending it until the livepatch finishes.
The sleep loop waiting for pid_allocated to drop has the same problem
and it doesn't even clear anything. So a schedule() in
TASK_INTERRUPTIBLE returns immediately.
Use a no_notify_signal guard. signal_pending() will ignore
TIF_NOTIFY_SIGNAL and the pid namespace reaper sleeps until a child
exits or free_pid() wakes it. |
| In the Linux kernel, the following vulnerability has been resolved:
io-wq: order the exit bit against worker creation task work
io_wq_exit_workers() cancels task work for queued worker creation with
task_work_cancel_match(). That has a plain load of task->task_works.
io_queue_worker_create() adds the new entry and tests IO_WQ_BIT_EXIT to
cancel it if the workqueue is already on its way out.
That must be ordered. task_work_add() has a full barrier via cmpxchg().
But io_wq_exit_start() sets the bit with set_bit() which doesn't have
any memory ordering.
So afaict, on weakly ordered architectures the exiting task may load
task_works before the store of the bit is visible. The other side tests
the bit before the store is visible as well. So the entry remains queued
with worker_refs and the exiting task waits on worker_done indefinitely.
If the task still has rings then io_uring_del_tctx_node() provides the
barrier via test_and_set_bit() in io_wq_set_exit_on_idle(). When it
has closed all rings though that barrier is gone.
Add the barrier after the set_bit(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: refuse __l2cap_chan_add if chan already has conn
l2cap_chan may be linked to l2cap_conn at most once. This is assumed in
several places, eg l2cap_chan_del cleanup.
There is a TOCTOU race where the invariant is violated:
[Task 1] [Task 2]
l2cap_chan_connect l2cap_sock_bind
l2cap_chan_lock lock_sock
l2cap_state_change if (sk->sk_state != BT_OPEN)
chan->state = BT_CONNECT
l2cap_sock_state_change_cb chan->state = BT_BOUND
sk->sk_state = BT_BOUND
lock_sock <------------------ release_sock
sk->sk_state = BT_CONNECT
l2cap_sock_connect() does not check sk->sk_state, so since chan->state
is now BT_BOUND, subsequent connect() ends up with second
__l2cap_chan_add.
Explicitly document and check the invariant in __l2cap_chan_add with
WARN_ON_ONCE. The only callsite where it could be hit is
l2cap_chan_connect, so add pre-check there to avoid relying on
chan->state. chan->state read/write is not properly guarded currently so
there can be other TOCTOUC problems.
Add l2cap_lock_chan in l2cap_sock_bind() to guard chan->state write. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Hold trace_types_lock when updating modules in persistent instances
trace_module_record() walks ftrace_trace_arrays from the module notifier
without trace_types_lock. A concurrent rmdir of an instance removes it
from the list and frees it under that lock, so a module load or unload
can walk into a freed trace_array. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Hold trace_types_lock when resetting last boot data from readers
update_last_data_if_empty() is called from tracing_open() with O_TRUNC,
tracing_read_pipe() and tracing_buffers_read() without trace_types_lock.
Two readers can both pass the LAST_BOOT test and free module_delta
twice, and a module notifier can update module_delta while it is being
freed.
Take trace_types_lock in those paths and keep the callers that already
hold it on an unlocked variant. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Reject incomplete event filter expressions
A non-empty expression normally finishes in predicate_parse()'s inner
loop, which resolves the pending logical operators before jumping to
finalization. If the input ends after an operator, possibly followed by
unary '!' tokens, the outer loop instead falls through with unresolved
operator state.
For example, "common_pid == 1 || common_pid == 2 &&" leaves
prog[0].target equal to -1. The second pass then reads prog[-1] before
the forward-jump check can reject it. Depending on adjacent slab
contents, it can also copy an out-of-bounds word into a branch target
that passes the forward-only check. A self-targeted perf tracepoint
counting event can reach this path through PERF_EVENT_IOC_SET_FILTER.
Reject the outer-loop fallthrough when a predicate has already been
parsed. This ensures that non-empty expressions only reach finalization
after the inner loop has resolved their operators. Keep the existing
no-filter error for input that has no predicates. Add a regression test
for trailing logical operators and unary negations. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Save the event file instead of the compatible histogram
create_field_var_hist() creates a histogram on the matched event to
supply a field variable, and records it on the target so it can be torn
down later:
hist_data = find_compatible_hist(target_hist_data, file);
...
/* Save the compatible histogram information */
var_hist->hist_data = hist_data;
hist_data is not the histogram it creates. It is one that was already
there, whose keys the new one copies. The saved pointer has a single
user, unregister_field_var_hists(), which runs when the target is
removed:
file = hist_data->field_var_hists[i]->hist_data->event_file;
find_compatible_hist() matches on keys alone, so it can pick one with no
variables of its own. check_var_refs() then returns false and the user
can remove it while the target still points at it:
BUG: KASAN: slab-use-after-free in event_hist_trigger_free+0x2b2/0x320
Read of size 8 at addr ffff8880093b90e0 by task init/1
Freed by task 1:
kfree+0x154/0x420
event_hist_trigger_free+0x1d5/0x320
event_hist_trigger_parse+0x35f3/0x69e0
trigger_process_regex+0x1a6/0x250
Save the event file instead. It is all the dereference ever wanted, and
it does not go away when the user removes a trigger. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Unregister field variable histograms when the command fails
An action that names a field on another event needs that field as a
variable, so create_field_var_hist() registers a second hist trigger on
that event to provide it, and records it in
target_hist_data->field_var_hists[].
If a later part of the same command fails, create_actions() returns an
error and event_hist_trigger_parse() jumps to out_free. The write fails
with -EINVAL and sched_switch gets no trigger, but:
# echo 'hist:keys=pid:ts0=common_timestamp.usecs' >> \
events/sched/sched_waking/trigger
# echo 'my_synth u64 lat; int a; int b' >> synthetic_events
# echo 'hist:keys=next_pid:wakeup_lat=common_timestamp.usecs-$ts0:\
onmatch(sched.sched_waking).my_synth($wakeup_lat,prio,nosuchfld)'\
>> events/sched/sched_switch/trigger
# cat events/sched/sched_waking/trigger
hist:keys=pid:vals=hitcount:ts0=common_timestamp.usecs:sort=hitcount:size=2048:clock=global [active]
hist:keys=pid:vals=hitcount:synthetic_prio=prio:sort=hitcount:size=2048 [active]
The second histogram is the one created for 'prio'. It is still active and
still counting.
out_free reaches destroy_field_var_hists(), which frees the
field_var_hists[] entries, but never unregister_field_var_hists(), which is
what removes the triggers and runs only from event_hist_trigger_free(). The
entry is freed and the trigger is left with nothing tracking it.
Unregister the field variable histograms in out_free as well, and record
each one as soon as its trigger is registered rather than after the lookup
that follows it, so no exit can leave a registered trigger untracked. The
entry then belongs to field_var_hists[] and is released by
destroy_field_var_hists(), so freeing it on that exit would be a double
free. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/histograms: Verify event_call identity when updating synth_event refcount
In event_hist_trigger_parse() and hist_unreg_all(), the histogram
registration and unregistration paths look up find_synth_event() using
trace_event_name(file->event_call) and adjust se->ref if a match is
found.
Because find_synth_event() only compares the event basename, registering
or removing a histogram on a non-synthetic trace event whose basename
matches a synthetic event erroneously modifies the synthetic event's
reference count. If a histogram is registered on the non-synthetic
event before the synthetic event is created and removed afterwards,
se->ref is decremented without a matching increment, allowing the
synthetic event to be freed while an active histogram action still holds
a pointer to it.
Introduce find_synth_event_call() to verify that &se->call matches
file->event_call before adjusting se->ref. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/syscalls: Use copy_from_user for the faultable syscall buffer
syscall_copy_user_array() copies the buffer argument of faultable
syscalls (write, pwrite64, ...) with __copy_from_user(), which skips
access_ok(). Use copy_from_user() instead so a non-user address is
rejected and the entry is recorded as faulted.
It could be a security concern for machines that trust perf a bit too
much. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: own the request before clearing ->head
io_waitid_remove_wq() only takes the wait queue lock if ->head is set.
io_waitid_wait() clears ->head first thing, before it tries to become the
owner of the request by bumping ->refs. If somebody else owns the request
at that point, nothing keeps it from completing the request while the
wake up handler is still going to touch it:
CPU0 (io_waitid_wait) CPU1 (io_waitid, holds a ref)
list_del_init(&wait->entry)
smp_store_release(&iw->head, NULL)
__do_wait() finds another child
io_waitid_remove_wq()
// ->head == NULL, no locking
io_waitid_finish(), IOU_COMPLETE
// request freed and reused
atomic_fetch_inc(&iw->refs)
The same goes for __io_waitid_cancel() if it claims the request in that
window. ->refs is part of the per opcode data of the request, so this
increments whatever the next user of the request keeps there. If that
happens to be zero, the handler concludes that it owns the request, and
queues io_waitid_cb() for it. With the window held open by a delay, and
the request reused for a receive that is waiting for data:
BUG: KASAN: slab-use-after-free in __wake_up_common+0x1ca/0x1f0
__wake_up_sync_key+0x36/0x50
sock_def_readable+0xf1/0x420
unix_stream_sendmsg+0x60b/0x1110
Allocated by task 87:
io_arm_apoll+0x1ed/0x940
Freed by task 87:
__io_submit_flush_completions+0x118d/0x1a10
tctx_task_work_run+0x327/0x950
Only clear ->head once the handler owns the request. If it doesn't, the
owner finds ->head set and has to wait for the lock, which is held by the
caller of the handler. Deleting the already deleted entry again is
harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/cmd: don't leave list poison in ->hash_node
io_uring_cmd_del_cancelable() uses hlist_del() to take a command off
->cancelable_uring_cmd, which leaves LIST_POISON1/2 behind in
->hash_node. Requests are recycled through the request cache without
being reinitialised, and not every user of ->hash_node sets it up before
it is used:
If a vectored futex wait is woken while futex_wait_multiple_setup() is
still queueing the futexes, io_futexv_wait() doesn't add the request to
->futex_list, and leaves the completion to the task_work queued by the
wake up. io_futexv_complete() ends in __io_futex_complete(), whose
hlist_del_init() is fine for a request that is unhashed, which is how all
other users of the node leave it. If the request was a cancelable
uring_cmd in its previous life, e.g. a ublk FETCH_REQ, it writes through
LIST_POISON2:
Oops: general protection fault, probably for non-canonical address
KASAN: maybe wild-memory-access in range [0xdead000000000120-...]
RIP: 0010:io_futexv_complete+0x219/0x420
Call Trace:
tctx_task_work_run+0x804/0x950
tctx_task_work+0x71/0xa0
task_work_run+0x118/0x200
Leave the node unhashed. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/wait: don't spin on a stuck overflow list
As long as IO_CHECK_CQ_OVERFLOW_BIT is set, io_cqring_wait_schedule()
returns right away, before it gets to look at signals or arms the timeout,
for io_cqring_wait() to flush the overflow list. If that doesn't empty the
list, and the CQ ring doesn't hold the number of events the caller wants,
the loop starts over, with the same result. The task spins in the kernel,
and can't be killed.
The assumption is that this can't happen: if CQEs can't be flushed, the
ring is full, and min_events is capped to the size of the ring. But:
- With IORING_SETUP_CQE_MIXED a 32b CQE needs two contiguous entries. It
is stuck on the list if a single one is free, and then the ring holds
less than cq_entries events. A single threaded application that asks
for as many events as the ring has entries never gets out of
io_uring_enter().
- Whether the ring is full is up to the CQ head, which the application
can write to. While one thread waits for events on an empty ring,
another one can move the head back so that the ring looks full and
have a CQE overflow. The waiter can't be stopped any more, not even by
SIGKILL.
Only the application can make room in the CQ ring. Return to it if the
list could not be flushed. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: don't lose the signal that ends work
When a thread exits, only its tracked requests are cancelled. Then its
io-wq is torn down. io_wq_exit_workers() signals every worker, to get it
out of an interruptible sleep, and waits for all of them to exit. Before
they do, they go through the work that is left. Unbounded work is
cancelled. Bounded work is run, as it is expected to end by itself.
Not all of it does. An open has no file yet, so it counts as bounded, and
the open of a FIFO waits for the other end. That is what the signal is for.
But the workers are signalled once, and a worker that hasn't started the
work by then loses the signal:
io_wq_exit_workers() io_worker_handle_work()
io_wq_worker_wake()
set TIF_NOTIFY_SIGNAL
io_assign_current_work()
io_run_task_work()
clear TIF_NOTIFY_SIGNAL
io_wq_submit_work()
fifo_open()
wait_for_partner()
wait_for_completion_timeout()
The thread never gets out of do_exit():
IORING_OP_OPENAT of a FIFO without a writer, IOSQE_ASYNC
exit of the thread that has submitted it
hangs in more than 9 of 10 attempts (4 CPUs, KVM), until the process is
killed.
Set TIF_NOTIFY_SIGNAL for bounded work that is started with IO_WQ_BIT_EXIT
set. The bit is set before the workers are signalled, and it is tested
after the flag has been cleared, with clear_notify_signal() providing the
barrier. So either the flag stays, or the bit is seen.
Work that is started while the io-wq exits is treated like work that is
being run at that time: it isn't interrupted unless it waits
interruptibly. |
| A vulnerability classified as critical has been found in Cardo Systems Scala Rider Q3. Affected is the file /cardo/api of the Cardo-Updater. Unauthenticated remote code execution with root permissions is possible. Firewalling or disabling the service is recommended. |
| A vulnerability was determined in mathurvishal CloudClassroom-PHP-Project. The affected element is the function session_regenerate_id of the file loginlinkadmin.php. Executing a manipulation of the argument PHPSESSID can lead to session fixiation. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. This product does not use versioning. This is why information about affected and unaffected releases are unavailable. The vendor was contacted early about this disclosure but did not respond in any way. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in Safari 27.2, iOS 26.7.2 and iPadOS 26.7.2, iOS 27.2 and iPadOS 27.2, macOS Golden Gate 27.2, visionOS 27.2. Processing maliciously crafted web content may result in the disclosure of process memory. |
| An integer truncation vulnerability in the NAS decoder of OpenAirInterface (OAI) CN5G AMF v2.2.1 allows an unauthenticated remote attacker to cause a denial of service (DoS) via crafted NAS Registration Requests containing a malformed IMEISV in the 5GS Mobile Identity IE. The Type6NasIe::Validate() function truncates a 32-bit length value to 16 bits, bypassing length validation and causing an out-of-bounds heap read in DecodeImeisv(), which can crash the AMF process. |
| In multiple locations, there is a possible way to trick a user into disclosing Autofill contents due to a tapjacking/overlay attack. This could lead to local escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. |
