| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: team: free skb when broadcast has no txable port
bc_transmit() sends the original skb through the last txable port.
When no port is txable, it returns false without consuming the skb, but
team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the
skb and its socket write-memory charge.
A TX-enabled, link-down port keeps the broadcast transmit op installed.
Carrier can stay up through a second link-up, TX-disabled port or be
forced on by userspace. Free the original skb on the no-port path while
leaving the existing drop accounting intact.
Discovered by Sashiko during review of previous commit. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: account non-AQL frames per peer rather than per link
The driver increments wcid->non_aql_packets when a frame goes to the
hardware queue. The completion path decrements the counter again.
For an MLO peer, the hardware reports the completion on the link that it
used for the transmission. This link can differ from the link that the
driver queued the frame on. In that case, the increment and the
decrement go to different link wcids, and the count drifts upwards until
it blocks the station.
Keep the count on the wcid of the primary link, like the other peer-wide
state. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: don't stash io_uring encoded data across -EAGAIN
Returning -EAGAIN while leaving btrfs_uring_encoded_data in the cmd PDU
leaks if the request is cancelled or the ring exits before reissue.
io_uring does not free driver PDU allocations on cleanup.
Write: io_queue_sqe() always issues with IO_URING_F_NONBLOCK first, so
return -EAGAIN before allocating and free data on every exit.
Read: free on nowait -EAGAIN too; only -EIOCBQUEUED keeps the allocation
for btrfs_uring_read_finished(). |
| Pipecat is an open-source Python framework for building real-time voice and multimodal conversational agents. From 0.0.98 until 1.6.0, the pipecat-ai package's built-in development runner exposes unauthenticated endpoints including /start, /daily, and /daily-dialin-webhook that can create bot sessions and Daily rooms. The runner binds to localhost by default and is intended only for local development, so exploitation requires an operator to expose it to untrusted traffic through --host 0.0.0.0, a published port, or a tunnel without access controls. An unauthenticated caller can consume local resources and third-party quotas and, depending on configuration, receive a room URL and join token. Version 1.6.0 adds a prominent development-runner banner and documentation that clarifies the unauthenticated boundary and directs production deployments to an authenticated dispatcher or managed runtime, while the endpoint behavior remains by design. This issue is fixed in version 1.6.0. |
| SequenceServer lets you rapidly set up a BLAST+ server with an intuitive user interface for personal or group use. Several HTTP endpoints did not properly sanitize user input and/or query parameters. This could be exploited to inject and run unwanted shell commands. This vulnerability has been fixed in 3.1.2. |
| Vulnerability in the Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition product of Oracle Java SE (component: Sound). Supported versions that are affected are Oracle Java SE: 8u503, 8u503-perf, 11.0.32.1, 17.0.20.1, 21.0.12.1, 25.0.4.1, 27; Oracle GraalVM for JDK: 17.0.20.1 and 21.0.12.1; Oracle GraalVM Enterprise Edition: 21.3.19.1.1. Difficult to exploit vulnerability allows unauthenticated attacker with network access via multiple protocols to compromise Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Successful attacks require human interaction from a person other than the attacker. Successful attacks of this vulnerability can result in unauthorized ability to cause a partial denial of service (partial DOS) of Oracle Java SE, Oracle GraalVM for JDK, Oracle GraalVM Enterprise Edition. Note: This vulnerability applies to Java deployments, typically in clients running sandboxed Java Web Start applications or sandboxed Java applets, that load and run untrusted code (e.g., code that comes from the internet) and rely on the Java sandbox for security. This vulnerability does not apply to Java deployments, typically in servers, that load and run only trusted code (e.g., code installed by an administrator). CVSS 3.1 Base Score 3.1 (Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:R/S:U/C:N/I:N/A:L). |
| Ghidra before 12.2 contains a resource allocation without limits vulnerability in ExtensionUtils.unzipToInstallationFolder() that extracts every extension ZIP entry without limiting file count. Attackers who persuade a user to install a crafted extension archive with many files can exhaust filesystem inodes, causing project writes and other processes to fail. |
| Wasmtime before 36.0.16, 37.0.0 before 48.0.3, and 49.0.0 before 49.0.1 does not adequately account for host allocations when lifting guest values through the dynamically-typed Val API, bypassing the hostcall fuel limit. A malicious WebAssembly guest can return crafted values that allocate at least ~100x more host memory than tracked, causing denial of service. |
| flat through 6.0.1 contains an uncontrolled resource allocation vulnerability in unflatten() that allows attackers to create huge sparse arrays via unbounded numeric keys. Attackers can supply flattened keys such as a.4294967294, causing iteration with forEach, spread or JSON.stringify to block the Node.js event loop. |
| OvenMediaEngine through 0.21.0 contains a denial of service vulnerability in OvtPacket::LoadHeader() that allows unauthenticated attackers to stall connections by sending payload_length values above 32750. Attackers can send crafted OVT packets to the OVT listener to hold connections open indefinitely and accumulate buffered memory, disrupting origin-to-edge stream relay. |
| GraphQL-core is a Python port of the GraphQL.js reference implementation. From 3.2.3 until 3.2.12 and 3.3.0rc1, the parser's max_tokens limit in Parser.advance_lexer counts only non-comment tokens returned after Lexer.lookahead skips comments. Each skipped comment is still allocated as a Token and retained through token.next and token.prev, allowing a highly compressible comment-padded GraphQL document to pass a low token limit while consuming memory. An unauthenticated remote attacker can exhaust worker memory before AST-based depth or complexity controls run. This issue is fixed in versions 3.2.12 and 3.3.0rc1. |
| A missing authentication vulnerability in the Fireware OS FireCluster synchronization daemon allows a remote, unauthenticated attacker to invoke privileged system-level administrative actions by sending a specially crafted request to the FireCluster management IP when the clustering feature is enabled. |
| A missing authentication vulnerability in the FireCluster Sync processing allows an attacker positioned on the cluster interconnect, such as a compromised cluster peer or an on-path network attacker, to invoke privileged firewall management actions as root by sending a specially crafted request. |
| A maliciously crafted .stack.json file can trigger a trusted Markdown injection vulnerability in Autodesk Fusion Post Processor Utility Extension. A malicious actor may exploit this vulnerability to execute arbitrary commands in the context of the current user. |
| Part-DB is an open source inventory management system for electronic components. Prior to version 2.13.2, Part-DB allows authenticated users to bypass the configured maximum attachment file size when using the server-side “Download external file” attachment feature. When server-side attachment downloads are enabled, Part-DB downloads the remote file and streams it directly to disk without enforcing the configured MAX_ATTACHMENT_FILE_SIZE limit. As a result, an authenticated user who can create or edit attachments can cause Part-DB to store files larger than the configured maximum attachment size, potentially exhausting disk space and causing a denial of service. This issue has been patched in version 2.13.2. |
| fpdf2 is a PDF creation library for Python. From 2.5.0 until 2.8.8, fpdf2's SVGObject.build_xref() passes nested SVG <use> references to GraphicsContext.add_item(), whose default clone=True deep-copy behavior copies the complete referenced graphics tree during FPDF.image() processing. Repeating references at each nesting level makes the in-memory object count and processing work grow exponentially, allowing a small user-controlled SVG to consume excessive CPU and memory, raise MemoryError, fail PDF generation jobs, and reduce or exhaust worker capacity. ResourceAccessPolicy does not prevent the issue because the references are inline and require no external resource, XML entity, local file, or permissive network setting. This issue is fixed in version 2.8.8. |
| Dell PowerProtect Data Domain, Feature Release versions 7.7.1.0 through 8.8, LTS2024 release versions 7.13.1.0 through 7.13.1.80, LTS2025 release versions 8.3.1.0 through 8.3.1.40, LTS2026 release versions 8.6.1.0 through 8.6.1.20, contain an Allocation of Resources Without Limits or Throttling vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Denial of service. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. The described memory use only grows in proportion to input already allocated by JSON.parse before Zod runs, is reachable only without an application request-size limit, and reflects expected validator behavior rather than a defect in Zod. |
| Knative pkg provides common packages shared across Knative repositories. Prior to 0.0.0-20260531000007-52dbd5ece63f, the knative.dev/pkg/webhook admissionHandler in webhook/admission.go decodes an attacker-supplied AdmissionReview through json.NewDecoder(io.TeeReader(r.Body, &bodyBuffer)) under an http.HandlerFunc without an http.MaxBytesReader or equivalent body-size limit. A pod-network client can send one oversized POST to an admission webhook, causing the decoder and bodyBuffer to retain amplified copies of the request until the controller pod exhausts memory and is OOM-killed. Every downstream consumer using the shared webhook server inherits the vulnerable behavior, including Knative, Tekton, KEDA, Sigstore policy-controller, and Kpack. For consumers configured with failurePolicy=Fail, loss of the controller can interrupt admission; with failurePolicy=Ignore, the affected webhook is unavailable while other admissions continue. This issue is fixed in version 0.0.0-20260531000007-52dbd5ece63f. |
| HTTP::Body versions before 1.23_01 for Perl allow memory and temporary file exhaustion via an unlimited number of form fields and multipart parts.
The urlencoded parser splits the whole body on its separators at once, creating one scalar per separator before any field is stored. This costs about 90 bytes of memory per separator byte. The multipart parser creates a temporary file for every part that carries a filename. Neither parser limits how many fields or parts a body may hold.
A remote attacker can exhaust worker memory with a body made of separators, or create thousands of temporary files with one request of small file parts. |
