| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Null pointer dereference in Windows Schannel allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: search every core slot when looking up a scheduler
sched_to_core() walks rdev->cores[] up to rdev->num_cores, and
rocket_remove() decrements num_cores for every core it removes. Unbind a
core that is not the last one and the cores behind it fall outside the
search, so sched_to_core() returns NULL for a core that is still bound and
still running jobs. Neither caller checks the result:
rocket_job_run(): rocket_fence_create(core), core->dev
rocket_job_timedout(): dev_err(core->dev, "NPU job timed out")
Unbinding the middle core of the three on an RK3588 while three clients are
submitting to all of them faults twice, once from the surviving core's
job queue and once from its reset work:
KASAN: null-ptr-deref in range [0x0000000000000220-0x0000000000000227]
Workqueue: fdad0000.npu drm_sched_run_job_work [gpu_sched]
pc : rocket_job_run+0x234/0x838 [rocket]
Call trace:
rocket_job_run+0x234/0x838 [rocket]
drm_sched_run_job_work+0x2cc/0xad8 [gpu_sched]
process_one_work+0x640/0x14f0
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: rocket-reset-2 drm_sched_job_timedout [gpu_sched]
pc : rocket_job_timedout+0xf0/0x1e0 [rocket]
Call trace:
rocket_job_timedout+0xf0/0x1e0 [rocket]
drm_sched_job_timedout+0x188/0x6a0 [gpu_sched]
Both are the third core: the workqueue names are its device and its
core->index, and it was left at slot 2 while num_cores had dropped to 2.
Search all the slots that were allocated, the way find_core_for_dev() now
does. A core that is still bound is then found, and the two callers get
the pointer they already assume they have.
This does not make unbinding one core out of several safe. An open client
keeps an entity pointing at the scheduler of the core that went away:
drm_sched reports it as not ready for every job that lands on it, and the
client waits in dma_fence_default_wait for a fence that will never signal.
Stopping the NULL dereference is what belongs in a fix; the rest wants
more thought. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ti: icssm-prueth: Move setting of netops to fix crash
icssm_prueth_netdev_init() calls of_phy_get_and_connect() before
ndev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| Null pointer dereference in Windows Hyper-V allows an authorized attacker to deny service locally. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: skip eviction of a BO with no resource
xe_evict_flags() switches on tbo->resource->mem_type to choose an
eviction placement. An xe BO can reach eviction with no ttm.resource,
e.g. an imported dma-buf BO whose resource was freed during teardown
while its attachment is still live: the exporter then invalidates it via
xe_dma_buf_move_notify() -> xe_bo_evict(), and the switch dereferences a
NULL resource and faults.
A BO with no resource has nothing placed or mapped, so there is nothing
to evict. Return an empty placement (num_placement = 0), mirroring the
handling already used for non-xe scatter-gather BOs just above;
ttm_bo_validate() then takes the pipeline-gutting path and returns 0.
Without the fix the xe_dma_buf@xe_test_dmabuf_move_notify_no_resource
dynamic live selftest will fail with below stack.
BUG: kernel NULL pointer dereference, address: 0000000000000010
RIP: 0010:xe_evict_flags+0xf4/0x140 [xe]
Call Trace:
<TASK>
xe_bo_evict+0x40/0xa0 [xe]
? ttm_bo_pipeline_gutting+0x71/0x180 [ttm]
xe_test_dmabuf_move_notify_no_resource+0x182/0x440 [xe]
xe_dma_buf_kunit+0x387/0x580 [xe]
v2: Add Fixes tag and failure info in commit text (Matt Brost)
(cherry picked from commit dbcfaac6331f1fcb0c2fe3ad3e9adb1e5d43ec0c) |
| FreeRDP 3.0.0 before 3.32.0 contains a null-pointer dereference in the smartcard emulation backend that accepts a null per-reader name in SCardGetStatusChange requests. A malicious RDP server can send a crafted reader-state entry with a null szReader, causing strcmp or _wcscmp to crash the client process. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: aeroflex: move setting of netops to fix crash
greth_of_probe() calls greth_mdio_init(), which connects the PHY,
before dev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: actions: Move setting of netops to fix crash
owl_emac_probe() calls owl_emac_phy_init(), which connects the PHY,
before netdev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: hisilicon: hisi_femac: Move setting of netops to fix crash
hisi_femac_drv_probe() connects the PHY before dev->netdev_ops is
assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads
dev->netdev_ops through netdev_need_ops_lock() since the commit in
question, so probing crashes with a NULL pointer dereference when
CONFIG_NET_SHAPER is enabled.
phy_link_topo_add_phy from phy_attach_direct+0xec/0x37c
of_phy_get_and_connect from hisi_femac_drv_probe+0x1f4/0x558
Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mxc: fix race between chained IRQ handler install and probe completion
mxc_update_irq_chained_handler() is called before the IRQ domain, the
generic IRQ chip, and the port list entry are set up. If an interrupt
arrives in that window:
- mx3_gpio_irq_handler() calls generic_handle_domain_irq() with
port->domain still NULL.
- mx2_gpio_irq_handler() walks mxc_gpio_ports, but the port has not
been added to the list yet.
Additionally, if any of the subsequent probe steps
(gpio_generic_chip_init(), devm_gpiochip_add_data(),
irq_domain_create_legacy(), or mxc_gpio_init_gc()) fail, the error
paths never unregister the chained handler, leaving a dangling handler
that points at freed memory.
Move the handler installation after all its dependencies are ready and
after list_add_tail(), so the handler is never live while the data
structures it touches are incomplete, and is never installed if probe
fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethoc: move setting of netops to fix crash
ethoc_probe() calls ethoc_mdio_probe(), which connects the PHY,
before netdev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: au1000: move setting of netops to fix crash
au1000_probe() calls au1000_mii_probe(), which connects the PHY,
before dev->netdev_ops is assigned. phy_attach_direct() ->
phy_link_topo_add_phy() reads dev->netdev_ops through
netdev_need_ops_lock() since the commit in question, so probing crashes
with a NULL pointer dereference when CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mv643xx: move setting of netops to fix crash
mv643xx_eth_probe() connects the PHY before dev->netdev_ops is
assigned. phy_attach_direct() -> phy_link_topo_add_phy() reads
dev->netdev_ops through netdev_need_ops_lock() since the commit in
question, so probing crashes with a NULL pointer dereference when
CONFIG_NET_SHAPER is enabled.
Assign netdev_ops before the PHY attach, as was done for emac in commit
7c9f391ec89c ("net: emac: move setting of netops to fix crash"). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix NULL sink dereference in USB4 bandwidth functions
allocate_usb4_bandwidth_for_stream() and allocate_usb4_bandwidth() both
use ASSERT(stream->sink) before dereferencing stream->sink->link. ASSERT
is compiled out in production builds, so a NULL stream->sink causes a
NULL pointer dereference.
link_set_dpms_off() already guards two earlier accesses to stream->sink
with explicit NULL checks, confirming that stream->sink can legitimately
be NULL. The subsequent call to deallocate_usb4_bandwidth() had no
equivalent guard.
Replace the ASSERT() calls with proper NULL checks that return false
early, and add a matching stream->sink guard at the call site in
link_set_dpms_off() consistent with the surrounding pattern.
v2: Keep the existing ASSERT() calls for diagnostics (to report
unexpected NULL sink), and add explicit NULL checks that return false
before dereferencing stream->sink. Also add a matching stream->sink
guard at the deallocation call site in link_set_dpms_off(). (Alex)
(cherry picked from commit 98029a0ce61feb52c563f65349dd9b25f672e355) |
| In the Linux kernel, the following vulnerability has been resolved:
mshv_vtl: Check per-CPU register page before mmap
Register-page setup is optional for each CPU. If allocation or
registration fails, mshv_vtl_configure_reg_page() warns and leaves that
CPU's reg_page NULL, but initial context setup continues successfully.
Meanwhile, successful setup on another CPU sets the global
mshv_has_reg_page flag.
mshv_vtl_fault() checks this global flag before selecting the requested
CPU's register page. With mixed setup results across online CPUs, the
check passes even for a CPU with no register page, reaching
get_page(NULL) when userspace faults in that mapping.
Check the selected per-CPU register page before taking its reference and
return VM_FAULT_SIGBUS if it is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash in print_graph_function_event()
tracing_set_tracer() assigns the flags of the newly selected tracer
with:
tr->current_trace_flags = t->flags ? : t->tracer->flags;
If the new tracer defines neither static flags nor default flags, like
hwlat, irqsoff or wakeup, add_tracer() has no per instance flags copy
for it, and both operands are NULL, so tr->current_trace_flags ends up
being NULL as well.
The ring buffer is not cleared when switching tracers: it is reset
inside tracer_init(), after current_trace_flags was already assigned.
If the buffer still holds function_graph entries of the previous
tracer, printing one of them dereferences the NULL pointer. This was
hit by cat trace during an ftrace stress test:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
RIP: 0010:print_graph_function_event+0xe/0x20
Call Trace:
s_show+0x4d/0x110
seq_read_iter+0x2d4/0x490
seq_read+0x130/0x170
vfs_read+0xb5/0x370
ksys_read+0x6d/0xe0
do_syscall_64+0xbc/0x450
The snapshot buffer is not reset at all, so this can be reproduced
without a race:
echo function_graph > /sys/kernel/tracing/current_tracer
echo 1 > /sys/kernel/tracing/snapshot
echo hwlat > /sys/kernel/tracing/current_tracer
cat /sys/kernel/tracing/snapshot
Rather than teaching every user of tr->current_trace_flags about this
corner case, make sure it is never NULL: when the newly selected
tracer has no flags at all, tracing_set_tracer() falls back to a
static empty no_tracer_flags. run_tracer_selftest() can hit the same
case, so the same fallback is added there too. The existing users
already handle opts == NULL, so these tracers keep behaving as before. |
| libexpat through 2.9.0 contains a NULL pointer dereference vulnerability in externalEntityInitProcessor2() in lib/xmlparse.c that mishandles the XML_TOK_NONE token from empty input. Attackers who control stream chunking can force an empty non-final first parse on an external entity subparser, causing a later parse to crash the application. |
| Invalid pointer in the JavaScript Engine: JIT component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| Invalid pointer in the JavaScript Engine component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
| Invalid pointer in the Nimbus Desktop Client component. This vulnerability was fixed in Firefox 159, Firefox ESR 153.6, Thunderbird 159, and Thunderbird 153.6. |
