| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.4, pypdf can enter an infinite loop when cloning or duplicating a crafted cyclic DictionaryObject. Clone traversal checked generated destination references rather than the original source references, allowing some source cycles to evade the visited-object check. This issue is fixed in version 6.21.4. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: cap ATOM command table nesting depth
Cap nesting at 32 levels with execute_depth and
return -ELOOP when exceeded. |
| Forge (also called node-forge) is a native implementation of Transport Layer Security in JavaScript. Prior to 1.4.1, the affected implementation used BigInteger.prototype.modInverse(), bnModInverse(), lib/jsbn.js, RSA public exponent e to process the relevant input or security decision. node-forge's bundled jsbn implementation entered an infinite loop when BigInteger.prototype.modInverse() received a negative value or modulus. An attacker who could control the RSA public exponent passed to key generation, or a direct modInverse() operand, could block the Node.js event loop at full CPU. Parsed DER, PEM, JWK, PKCS#12, X.509, and TLS values are unsigned and cannot trigger this issue. This issue is fixed in version 1.4.1. |
| pypdf is a free and open-source pure-python PDF library. Prior to 6.21.4, pypdf can enter an infinite loop while opening a crafted incomplete PDF whose standard cross-reference table reaches the end of the file without a trailer. The trailer search can repeatedly rewind to the same stream position instead of terminating when parsing makes no progress, blocking the processing thread. This issue is fixed in version 6.21.4. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Drop unnecessary PMD page copy when freeing
On a box with a discrete GPU, lockdep reports a possible deadlock as
soon as kswapd shrinks the TTM page pool. The immediate cause is an
x86 commit that added an mmap_read_lock() to kernel page protection
munging code.
The huge vmap code holds the same lock over a GFP_KERNEL allocation,
which is a no-no now that reclaim can take it. That allocation is in a
page table *free* path and ends up being for dubious purposes[1].
Basically, it tries to avoid hardware setting Accessed=1 in page table
entries that are unreachable by the hardware, a non-issue.
Remove the PMD copy. Detach the original PMD page at the PUD, flush
the mid-level caches, and free the PTE tables straight from the
detached PMD page. With no allocation left, the locking issue is gone.
Lockdep splat/analysis:
WARNING: possible circular locking dependency detected
7.3.0-rc3-f6e7b42bf05b+ #183 Tainted: G U
------------------------------------------------------
kswapd0/269 is trying to acquire lock:
((init_mm).mmap_lock){++++}-{4:4}, at: change_page_attr_set_clr+0x29a/0x4a0
but task is already holding lock:
(pool_shrink_rwsem){.+.+}-{4:4}, at: ttm_pool_shrink+0xb2/0x330 [ttm]
Chain exists of:
(init_mm).mmap_lock --> fs_reclaim --> pool_shrink_rwsem
The cycle is built from three edges:
1) pool_shrink_rwsem -> (init_mm).mmap_lock
The TTM shrinker restores the caching attribute of every page it
frees, while holding pool_shrink_rwsem:
ttm_pool_shrink()
-> ttm_pool_dispose_list()
-> ttm_pool_free_page()
-> set_pages_wb()
-> change_page_attr_set_clr() [ init_mm mmap read lock ]
2) fs_reclaim -> pool_shrink_rwsem
The same shrinker, called from reclaim.
3) (init_mm).mmap_lock -> fs_reclaim
ioremap() installing a huge PUD mapping over an existing PMD table:
ioremap_page_range()
-> vmap_range_noflush()
-> vmap_try_huge_pud() [ init_mm mmap read lock ]
-> pud_free_pmd_page()
-> __get_free_page(GFP_KERNEL) [ enters reclaim ]
[ dhansen: Lots of changelog munging/trimming and merged comments from my
version of the fix. ] |
| By permanently omitting the final control-response line, a malicious FTP,
IMAP, POP3, or SMTP server can exploit libcurl and completely bypass its
configured transfer timeout mechanism, indefinitely blocking all concurrent
transfers bound to the same multi-handle. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32
An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS
frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in
the generic FC transport. This is not a local userspace or IP network
path; the attacker must be able to inject fabric traffic, for example as
a compromised switch or fabric controller, or as a same-zone N_Port on a
fabric that permits source spoofing.
The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop
counter against the 32-bit on-wire pname_count field, and did not bound
pname_count by the descriptor body already validated by the TLV walker.
A pname_count of 256 therefore wraps the counter and keeps the loop
condition true indefinitely.
Factor the shared pname_list[] walk into one helper, widen the counter
to u32, and clamp pname_count against the entries that fit in the
descriptor body before iterating. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: dwmac1000: clear the RGMII status interrupt
Since commit 2e2c878a3141 ("net: stmmac: remove SGMII/RGMII/SMII
interrupt handling") nothing on the RGMII path reads GMAC_RGSMIIIS, so
RGSMIIIS stays pending behind GMAC_INT_MASK from the first link change
on. stmmac_resume() resets the MAC in stmmac_hw_setup(); the reset sets
GMAC_INT_MASK to 0 until dwmac1000_core_init() writes the mask again,
and the pending status storms the line:
dwmac_dma_interrupt: unexpected status 04000000
A register dump at the first message on ODROID-HC4 showed it:
core int_status 00000001 int_mask 00000000 pmt 00000000 rgsmiiis 0000000d
When the resume thread runs on the CPU that takes the MAC interrupt,
the storm starves it: a soft lockup, then a watchdog reset or a hang.
Read GMAC_RGSMIIIS in dwmac1000_irq_status() when the status is not
masked, as the driver did before 2e2c878a3141; the read clears it.
Wake-on-LAN resume from s2idle with the resume thread and the MAC
interrupt on one CPU: Helios64 (dwmac-rk), 7.3-rc6, soft-locked in 3 of
3 resumes without a fix and in 0 of 10 with this patch; it ran with an
out-of-tree dwmac-rk change that keeps the GMAC powered across suspend.
ODROID-HC4 (dwmac-meson8b): 0 of 10 with this patch, 2 of 2 without a
fix on a 7.3-rc5 build. irq_rgmii_n went up by one per resume. |
| P-Net before 1.0.3 enters an infinite loop when handling a read request for the PDPortDataCheck record with subslot 0 (whole module). The loop over the ports never advanced to the next port, so the request never completes and the device stops responding. A remote unauthenticated attacker can use this to cause a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Disable interrupts while holding delayed_cmd_lock
target_do_delayed_work() takes dev->delayed_cmd_lock with a plain
spin_lock(). It runs from system_percpu_wq, so interrupts stay enabled
while the lock is held. Every other acquisition of that lock uses
spin_lock_irqsave(): target_handle_task_attr() and
transport_complete_ordered_sync() in target_core_transport.c, and
target_non_ordered_release() in target_core_device.c.
That was safe while every caller of transport_complete_task_attr() ran
in process context: target_complete_ok_work() from target_completion_wq,
transport_complete_qf() from dev->qf_work_queue, and
transport_generic_request_failure() from the submit and execute paths.
Since commit 06933066d88a ("scsi: target: Add support for completing
commands from backend context") that is no longer true. With
complete_type=1 on a fabric that sets direct_compl_supp,
target_complete() runs target_complete_ok_work() inline in the backend's
completion context, which target_complete_cmd_with_sense() documents as
"May be called from interrupt context". For iblock that is the bio
end_io.
target_complete_ok_work() starts with transport_complete_task_attr(),
which takes delayed_cmd_lock in two ways:
- Every ORDERED command is put on dev->delayed_cmd_list by
target_handle_task_attr() and dispatched from there by
target_do_delayed_work(), which marks it SCF_TASK_ORDERED_SYNC. Its
completion therefore goes through transport_complete_ordered_sync().
- A SIMPLE command that completes while an ORDERED command is pending
drops the last reference to the killed dev->non_ordered, and
percpu_ref_put() then runs target_non_ordered_release() in the
completing context.
Both take the lock and, if commands are waiting, call
schedule_work(&dev->delayed_cmd_work), which queues on system_percpu_wq,
i.e. on the CPU that took the completion. Further completions for the
same queue are typically delivered there too, so one arriving while the
work holds the lock spins on it forever.
Reaching this needs complete_type=1, which is not the default
(vhost-scsi, the only fabric with direct_compl_supp, defaults to
TARGET_QUEUE_COMPL), a backend whose I/O completes from interrupt
context, and ORDERED commands from the initiator. Linux virtio_scsi
guests send only VIRTIO_SCSI_S_SIMPLE and never take the ordered path;
any guest that uses the ORDERED task attribute, which vhost-scsi
accepts, does.
target_do_delayed_work() is a work item and always runs in process
context, so spin_lock_irq() is sufficient.
Found by inspection; no runtime report. A single ORDERED command goes
through both acquisitions, so with CONFIG_PROVE_LOCKING the first one
completed through direct completion should produce an inconsistent lock
state report on delayed_cmd_lock (hardirq or softirq, depending on where
the backend completes). |
| Twisted is an event-based framework for internet applications, supporting Python 3.6+. Prior to 26.10.0rc1, twisted.mail.imap4.IMAP4Server reaches twisted.mail.imap4.parseNestedParens with a negative literal size in an authenticated SEARCH command after the client enters the selected mailbox state. The negative size moves the parser cursor below zero, and Python's negative indexing prevents the synchronous scanning loop from terminating. The loop freezes the single-threaded reactor, stopping other IMAP connections and any SMTP or POP3 services hosted in the same process until restart. This issue is fixed in version 26.10.0rc1. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: fix soft lockup in the netlink flow dump
A production compute node carrying a few thousand datapath flows hit a
soft lockup inside a single netlink flow dump and panicked.
ovs_flow_cmd_dump() calls ovs_flow_stats_get() for every flow it
emits, and that releases stats->lock with spin_unlock_bh() once per
CPU that has touched the flow. Every release is a local_bh_enable(),
and each one runs the pending softirq backlog in the dumping thread's
own context.
The skb bounds the flows one callback emits, but not the softirq work
it absorbs. On a CPU that carries the box's packet load the backlog
refills as fast as it drains, so the dumping thread becomes that CPU's
softirq engine. It never sleeps and it has no reschedule point, so
under voluntary preemption nothing can take the CPU away from it:
neither the ksoftirqd the kernel woke to take the work over, nor the
stopper thread the softlockup detector dispatches to refresh its
timestamp.
Hold BH off across the whole callback instead, the way
ctnetlink_dump_table() does, so the nested spin_unlock_bh() stop
draining softirqs. The loop already runs under rcu_read_lock() and
cannot sleep. What it gives up is preemption under CONFIG_PREEMPT,
since a BH-off region is not preemptible outside PREEMPT_RT. The
region stays short: the skb caps the flows one callback emits, and
empty buckets cost no skb space but are each visited once per dump, as
the cursor only moves forward. The table grows on insert and shrinks
only on flush, so the walk is bounded by the largest flow count the
datapath has held. The softirq backlog the callback used to absorb has
no bound at all. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: avoid repeated scans in evict_inodes()
We observed hung tasks when users attempted to unmount a filesystem
after its disk had been removed while still in use. During device
removal, fs_bdev_mark_dead() calls evict_inodes() while holding s_umount.
Each time evict_inodes() drops s_inode_list_lock to reschedule, it
restarts the walk from the head of s_inodes. With many referenced inodes
at the head of the list, these restarts repeatedly scan the same inodes
without reclaiming them. This can keep s_umount held for a long time,
blocking concurrent umount attempts and triggering hung-task reports.
Keep the current inode, already marked I_FREEING, out of the disposal
batch until s_inode_list_lock is reacquired. Resume the walk from this
inode and dispose of it in a later batch or at the end of the walk.
The zero-refcount and state checks under i_lock allow this walker to
claim the inode by setting I_FREEING and removing it from the LRU.
Other reclaimers skip the inode, leaving this walker responsible for
eviction. Only evict() removes it from s_inodes, so keeping it out of
the disposal batch ensures that it remains on the list while the lock
is dropped. After reacquiring the lock, reading its current next pointer
accounts for concurrent removal of following inodes.
The existing inode lifetime rules prohibit acquiring a reference to an
inode marked I_FREEING or I_WILL_FREE. __iget() requires its caller to
hold i_lock and establish that taking a reference is valid. Inode lookup
and igrab() check these flags under i_lock when acquiring a reference
from zero. ihold() requires an existing reference, which would keep
i_count nonzero and prevent this walker from claiming the inode. These
rules already allow iput_final() and the inode shrinker to release
i_lock after setting I_FREEING and before eviction completes.
A temporary __iget() reference would also keep the inode on the list,
but its release must preserve last-reference handling. Another user can
acquire a reference, update lazy timestamps and drop its reference while
the pin is held. If the pin becomes the last reference, dropping it with
atomic_dec_and_test() and evicting directly bypasses iput()'s lazytime
handling and can lose those timestamp updates.
Releasing the pin with iput() preserves that handling, but does not
guarantee eviction. fs_bdev_mark_dead() runs with SB_ACTIVE set, so iput()
may retain the inode in cache, whereas evict_inodes() must evict eligible
zero-reference inodes. The inode may also have been freed when iput()
returns, so the walker cannot then use it to force eviction. Using
I_FREEING preserves the existing eviction behavior without introducing
an additional last-reference transition.
The xfstests auto group passed on ext4 and XFS with known unrelated
failures excluded. No new issues were observed, and the previously
reproducible hung task no longer occurs with this patch. |
| In EmberZNet 9.1.1 and earlier, a malformed Discover Attributes command can result in a loop with unreachable exit condition (infinite loop). These messages must come from a device that has already joined the network. Only devices supporting manufacturer-specific clusters are impacted. |
| OCO-Server is a self-hosted endpoint management application for computer inventory, software deployment, and mobile device management. Prior to 1.2.1, `Html::commandButton()` in `lib/Html.class.php` embeds an action URL containing a stored computer hostname into a JavaScript string in an inline `onclick` handler, using `htmlspecialchars(ENT_QUOTES)` only for HTML escaping. Browsers decode the HTML entities before interpreting the handler as JavaScript, allowing a crafted hostname to escape the string and execute script in an administrator's authenticated session when an affected command button is activated. `frontend/views/computer-details.php` passes `$computer->hostname` to this helper using `Computer::DEFAULT_COMPUTER_COMMANDS` in `lib/Models/Computer.class.php`, whose VNC, RDP, SSH, and Ping entries use `new_tab=false` and the vulnerable `window.location` branch. A remote attacker who possesses the shared `agent-registration-key` can use the `oco.agent.hello` handler in `frontend/api-agent.php` to store an unchecked hostname when `agent-self-registration-enabled` is enabled; self-registration is disabled by default. The vulnerable default command buttons require no custom command configuration. The injected script can abuse the administrator's privileges, including permission to deploy software jobs to managed computers. This issue is fixed in version 1.2.1. |
| An Integer Overflow vulnerability in the DPI certificate scanner in Juniper Networks Session Smart Router allows an unauthenticated remote attacker to cause a denial of service via a specially crafted TLS server certificate. |
| Kafka Streams derives its stream-time clock from record timestamps. PunctuationSchedule.next() computed the next punctuation time as timestamp + (intervalsMissed + 1) * interval with no overflow check. A record with a timestamp at or near Long.MAX_VALUE advances stream time to that value, so the next stream-time punctuation overflows to a negative time. PunctuationQueue then re-queues that time and loops on it indefinitely while holding a lock, stalling the StreamThread.
Impact:
A single record is enough. The affected StreamThread stops processing, and because the record stays in the topic the hang returns on restart; an application whose partitions are all affected becomes unresponsive. Only the Streams application is affected, not the brokers or the cluster. Triggering it needs write access to a source topic whose topology uses stream-time punctuation, and a broker that stores the record: brokers from Apache Kafka 4.0.0 reject such a timestamp by default (log.message.timestamp.after.max.ms, one hour), so it is reachable only on older brokers or where that bound has been relaxed.
Mitigation:
Upgrade Kafka Streams to 4.2.2, 4.3.2, or 4.4.0. As defense in depth, keep log.message.timestamp.after.max.ms bounded on source topics and restrict write access to them.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: the next punctuation time is computed with overflow-checked arithmetic (clamped to Long.MAX_VALUE), and a rescheduled punctuation is re-queued only when its time moves forward. |
| GNU mtools through 4.0.49 has an out-of-bounds write in parse_vses in vfat.c. |
| GFI KerioConnect (Kerio Connect) before 10.0.9 Patch 2 contains a cross-site scripting vulnerability in the Webmail component that allows a remote attacker to spoof link targets or inject HTML into a message as rendered in a victim's authenticated Webmail session by sending a crafted email whose text is already inside a link. Attackers can exploit the link auto-formatter's re-processing of already-linked text, using quote characters to break out of the href attribute and inject attacker-controlled markup to execute script in the victim's session. |
| Asterisk is an open source private branch exchange and telephony toolkit. From 21.0.0-pre1 until Asterisk 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3, the `chan_ooh323` `Q.931 party-number parser` lacks the `CVE-2022-37325` fix because that fix was never forward-ported from Asterisk 20 to later versions. Malformed Q.931 elements in an `OOH323 request` can therefore crash Asterisk. This issue affects Asterisk versions greater than 20. The `chan_ooh323` addon channel driver must be explicitly compiled and installed, which is not the default, and its port must be publicly reachable. This issue is fixed in Asterisk 21.12.3, 22.10.1, 23.4.1 and Certified Asterisk 22.8-cert3. |
