| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix stall when a task enqueued with SCX_ENQ_LAST lands back on its CPU's local DSQ
With SCX_OPS_ENQ_LAST, the last runnable task on a CPU is passed to
ops.enqueue() instead of being kept running. Exiting tasks without
SCX_OPS_ENQ_EXITING, migration disabled tasks without
SCX_OPS_ENQ_MIGRATION_DISABLED and tasks on an offline rq skip ops.enqueue()
and go straight to the local DSQ. This happens in put_prev_task_scx() after
the pick has settled on idle, so nothing reschedules the CPU, which idles
with the task queued until an unrelated wakeup lands on it or the watchdog
fires.
scx_mitosis, which sets SCX_OPS_ENQ_LAST without SCX_OPS_ENQ_EXITING, hit
this during mass cgroup teardown: exiting tasks stuck in exit_mmap() for
over 40 seconds.
A task put on the local DSQ runs, as anywhere else. If the SCX_ENQ_LAST
enqueue left the task on this CPU's local DSQ, set need_resched on the task
being switched in, as proxy_resched_idle() does. resched_curr() would flag
the task being put instead, and __schedule() clears that right after the
pick. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: remove stale rcu_barrier() in br_multicast_dev_del()
This rcu_barrier() came from a time call_rcu() calls were used in
net/bridge/br_multicast.c.
Now kfree_rcu() is there, we can remove this problematic rcu_barrier()
which causes extreme RTNL pressure in many syzbot reports.
INFO: task syz-executor:77945 is blocked on a mutex likely owned by task kworker/u1024:5:36537.
task:kworker/u1024:5 state:D stack:24616 pid:36537 tgid:36537 ppid:2 task_flags:0x4208060 flags:0x00080000 last_sleep:612797637337
Workqueue: netns cleanup_net
Call Trace:
<TASK>
[<ffffffff81914eaa>] context_switch+0xf2a/0x1730 kernel/sched/core.c:6483
[<ffffffff81201143>] __schedule+0x1133/0x43a0 kernel/sched/core.c:8411
[<ffffffff8120446b>] __schedule_loop kernel/sched/core.c:8514 [inline]
[<ffffffff8120446b>] schedule+0xab/0x260 kernel/sched/core.c:8529
[<ffffffff8121a093>] schedule_timeout+0xc3/0x2b0 kernel/time/sleep_timeout.c:75
[<ffffffff81205347>] do_wait_for_common kernel/sched/completion.c:100 [inline]
[<ffffffff81205347>] __wait_for_common kernel/sched/completion.c:121 [inline]
[<ffffffff81205347>] wait_for_common kernel/sched/completion.c:132 [inline]
[<ffffffff81205347>] wait_for_completion+0x2c7/0x5d0 kernel/sched/completion.c:153
[<ffffffff81b8f27f>] rcu_barrier+0x49f/0x620 kernel/rcu/tree.c:3888
[<ffffffff860091b3>] br_multicast_dev_del+0x303/0x350 net/bridge/br_multicast.c:4459
[<ffffffff85fb5dbc>] br_dev_uninit+0x1c/0x40 net/bridge/br_device.c:157
[<ffffffff8568058c>] unregister_netdevice_many_notify+0x1c1c/0x2300 net/core/dev.c:12599
[<ffffffff8562be43>] ops_exit_rtnl_list net/core/net_namespace.c:187 [inline]
[<ffffffff8562be43>] ops_undo_list+0x3d3/0x940 net/core/net_namespace.c:248 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: add hook transactions for device deletions
Restore the flag that indicates that the hook is going away, ie.
NFT_HOOK_REMOVE, but add a new transaction object to track deletion
of hooks without altering the basechain/flowtable hook_list during
the preparation phase.
The existing approach that moves the hook from the basechain/flowtable
hook_list to transaction hook_list breaks netlink dump path readers
of this RCU-protected list.
It should be possible use an array for nft_trans_hook to store the
deleted hooks to compact the representation but I am not expecting
many hook object, specially now that wildcard support for devices
is in place.
Note that the nft_trans_chain_hooks() list contains a list of struct
nft_trans_hook objects for DELCHAIN and DELFLOWTABLE commands, while
this list stores struct nft_hook objects for NEWCHAIN and NEWFLOWTABLE.
Note that new commands can be updated to use nft_trans_hook for
consistency.
This patch also adapts the event notification path to deal with the list
of hook transactions. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix missing migration protection in __rhtab_map_lookup_and_delete_batch()
bpf_mem_cache_free_rcu() uses this_cpu_ptr() which requires migration
to be disabled. All callers of rhtab_delete_elem() disable migration
except __rhtab_map_lookup_and_delete_batch(), which calls it under
rcu_read_lock() only.
On CONFIG_PREEMPT_RCU, rcu_read_lock() does not disable preemption or
migration, so the task can migrate between CPUs during the delete loop,
causing this_cpu_ptr() to trigger:
BUG: using smp_processor_id() in preemptible [00000000] code
Fix by wrapping the delete loop in migrate_disable()/migrate_enable()
in __rhtab_map_lookup_and_delete_batch(), matching the migration
protection that the other callers already provide. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: hub: use shorter 120ms post resume hold for SS root hubs
Holding a USB3 hub PM runtime reference for 200ms at hub resume triggers
an AMD platform issue. Users running Android adb report crashes after
adb has been polling and waking up the USB subsystem once a second for
some time. Vendors are working on a solution. Disabling USB runtime PM
is one way to prevent this issue, but it is also proven that reducing the
hold time to 120ms in resume also mitigates it. See Link for more
details.
Reducing the hold time to 120ms for the USB3 roothub is in itself a valid
change and optimization, as the current 200ms is excessive: a root hub
has no upstream suspended hub whose wake propagation needs to be
accounted for, but still need some time for USB3 link training to
complete.
Keep the 200ms hold for external hubs that commit 8f5b7e2bec1c
("usb: hub: fix detection of high tier USB3 devices behind suspended
hubs") is intended for. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: remove the fsnotify marks of a mount namespace in process context
mnt_ns_release() drops the last passive reference of a mount namespace
and removes its fanotify marks via fsnotify_mntns_delete(). That takes
the mutex of every group with a mark on the namespace and the spinlock
of the connector. Fine from process context. But mnt_ns_tree_remove()
hands the reference the namespace was allocated with to call_rcu() and
so the marks are removed from the RCU softirq:
BUG: sleeping function called from invalid context at kernel/locking/mutex.c:623
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 0, name: swapper/3
__mutex_lock+0x113/0x24b0
fsnotify_destroy_marks+0x11b/0x3d0
mnt_ns_release_rcu+0x57/0xa0
rcu_core+0x6b6/0x1e40
and lockdep complains about the connector lock being taken from softirq
context. A fanotify group with a FAN_MARK_MNTNS mark on the mount
namespace of another task is all that's needed. Root in a user
namespace can do that for a mount namespace it owns. The task exits and
the namespace is freed with the mark still on it.
Remove the marks in free_mnt_ns() before the namespace is handed to RCU.
That runs in process context once the last active reference is gone. A
mark is added through a file descriptor to the namespace which holds an
active reference so no mark can show up after that. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Disable the V3D interrupt across runtime suspend
vc4_irq_disable() masks the V3D interrupt sources and then calls
synchronize_irq() before the V3D is powered down. However, by itself,
this is not enough to quiesce the interrupt handler.
synchronize_irq() waits for handlers that have already set
IRQD_IRQ_INPROGRESS, and for irqchips reporting IRQCHIP_STATE_ACTIVE.
A GIC interrupt chip is able to mark an interrupt active as soon as a
CPU acknowledges it, so there these checks cover the whole dispatch path.
On RPi 0-3, however, the interrupt controller is ARMCTRL, which has no
active state. A CPU that has read the hwirq out of the pending register
but has not yet reached handle_level_irq() stays invisible to
synchronize_irq().
During a power transition, vc4_irq() may therefore run after the power
domain is off, where every V3D register read will return 0xdeadbeef.
0xdeadbeef has FLDONE, FRDONE and OUTOMEM set. This problem doesn't
trigger NULL pointer dereference issues only because the functions
vc4_irq_finish_bin_job() and vc4_irq_finish_render_job() return early
when there is no job pointer, but OUTOMEM is still able to schedule
vc4_overflow_mem_work() after vc4_irq_disable() has already cancelled it.
Therefore, fix the spurious interrupts by disabling the interrupt line
across the PM transition. To preserve the enable/disable balance, move
vc4_irq_install() and request the IRQ line disabled before the first
runtime resume. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Skip cond_resched() in inet_csk_listen_stop() under BPF context
bpf_sock_destroy() runs from the tcp iterator, under rcu_read_lock(). If
the sock is a listener that still has children in its accept queue,
tcp_abort() ends up in inet_csk_listen_stop() and the cond_resched()
there trips the debug check:
BUG: sleeping function called from invalid context at net/ipv4/inet_connection_sock.c:1523
in_atomic(): 0, irqs_disabled(): 0, non_block: 0, pid: 628, name: test_progs
preempt_count: 0, expected: 0
RCU nest depth: 1, expected: 0
locks held by test_progs/628: 3, last CPU#3:
#0: ffff8881158cee18 (&p->lock){+.+.}-{4:4}, at: bpf_seq_read+0x56/0x1210
#1: ffff8881106bb858 (sk_lock-AF_INET6){+.+.}-{0:0}, at: bpf_iter_tcp_seq_show+0x32b/0x4b0
#2: ffffffffb435af20 (rcu_read_lock){....}-{1:3}, at: bpf_iter_run_prog+0x46b/0xde0
CPU: 3 UID: 0 PID: 628 Comm: test_progs Tainted: G W 7.2.0+ #65 PREEMPT
Tainted: [W]=WARN
Call Trace:
<TASK>
dump_stack_lvl+0xc1/0xf0
dump_stack+0x10/0x20
__might_resched+0x3d2/0x610
inet_csk_listen_stop+0x7b/0xbf0
tcp_abort+0x23b/0x3b0
bpf_sock_destroy+0xfc/0x140
bpf_prog_448133d24601754f_iter_tcp6_server+0x81/0x8a
bpf_iter_run_prog+0x538/0xde0
bpf_iter_tcp_seq_show+0x26b/0x4b0
bpf_seq_read+0x424/0x1210
vfs_read+0x197/0xe40
ksys_read+0x119/0x240
__x64_sys_read+0x72/0xc0
x64_sys_call+0x647/0x27e0
do_syscall_64+0xe5/0x610
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fad39b28aca
RSP: 002b:00007ffc381c61c0 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 00007ffc381c6a88 RCX: 00007fad39b28aca
RDX: 0000000000000032 RSI: 00007ffc381c6250 RDI: 0000000000000014
RBP: 00007ffc381c61e0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003
R13: 0000000000000000 R14: 000055f077c1bbb0 R15: 00007fad3a0f3000
</TASK>
The commit that added the kfunc already guards lock_sock() in tcp_abort()
and udp_abort() with has_current_bpf_ctx(), but missed the listener path.
Do the same for the cond_resched(). The loop runs inside the iterator's
rcu_read_lock(), it must not reschedule or report a quiescent state there. |
| In the Linux kernel, the following vulnerability has been resolved:
net/handshake: Drain pending requests at net namespace exit
The arguments to list_splice_init() in handshake_net_exit() are
reversed. The call moves the local empty "requests" list onto
hn->hn_requests, leaving the local list empty, so the subsequent
drain loop runs zero iterations. Pending handshake requests that
had not yet been accepted are not torn down when the net namespace
is destroyed; each one keeps a reference on a socket file and on
the handshake_req allocation.
Pass the source and destination in the documented order
(list_splice_init(list, head) moves list onto head) so the pending
list is transferred to the local scratch list and drained through
handshake_complete().
Fixing the splice direction exposes a list-corruption race. After
the splice each req->hr_list still has non-empty link pointers,
threading the stack-local scratch list rather than hn_requests.
A concurrent handshake_req_cancel() -- for example, from sunrpc's
TLS timeout on a kernel socket whose netns reference was not
taken -- finds the request through the rhashtable, calls
remove_pending(), and sees !list_empty(&req->hr_list).
__remove_pending_locked() then list_del_init()s an entry off the
scratch list while the drain iterates, corrupting it. The same
call arriving after the drain loop has run list_del() on an
entry hits LIST_POISON instead.
Have remove_pending() check HANDSHAKE_F_NET_DRAINING under
hn_lock and report not-found when drain is in progress. The
drain has already taken ownership; handshake_complete()'s existing
test_and_set on HANDSHAKE_F_REQ_COMPLETED still arbitrates
between drain and cancel for who calls the consumer's hp_done. Use
list_del_init() rather than list_del() in the drain so req->hr_list
does not carry LIST_POISON after drain releases the entry.
The DRAINING guard in remove_pending() makes cancel return false,
but cancel still falls through to test_and_set_bit on
HANDSHAKE_F_REQ_COMPLETED and drops the request's hr_file reference.
Without another pin, if that is the last reference, sk_destruct frees
the request while it is still linked on the drain loop's local list.
Pin each request's hr_file under hn_lock before releasing the list,
and drop that drain pin after the loop finishes with the request. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/vaddr: avoid hw-driven pte updates during damon_hugetlb_mkold()
damon_hugetlb_mkold() reads the page table entry into a local variable,
unsets the accessed bit in the variable, and updates the page table entry
with the updated variable value. If hardware updates the same page table
entry in parallel, the hw updates could be lost. For example,
hardware-updated dirty bits might be lost.
Avoid the parallel updates by clearing the page table entry when reading
it together, using huge_ptep_get_and_clear(). If a parallel write to the
memory is made after the clearing, the hw will see the page table entry is
cleared, trigger page fault and wait until it is handled. The page fault
handling will wait for damon_hugetlb_mkold() due to the page table lock.
Because hugetlbfs is an in-memory file system and hugetlb pages cannot be
reclaimed, no critical issue is expected to my best knowledge. But
definitely this is a nasty bug that should be fixed sooner rather than
later.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
vhost: invalidate vring access on IOTLB transitions
When VIRTIO_F_ACCESS_PLATFORM changes, cached vring pointers and IOTLB
metadata are interpreted in a different address space. Keeping them
across the transition can leave stale ring mappings in use.
Clearing d->iotlb before taking the VQ locks also lets a worker observe
a transient NULL d->iotlb and fall back to d->umem while translating a
descriptor.
Add a common vhost_clear_device_iotlb() helper for vhost-net and
vhost-vsock. Take all VQ mutexes in index order before dropping the
device-wide IOTLB, invalidate each VQ's cached ring access and metadata,
clear pending IOTLB messages, and free the old table after the handoff.
This serializes the transition with workers and prevents mixed address
space mappings.
On the first direct-to-IOTLB transition, invalidate the cached vring
addresses. When an existing device IOTLB is replaced, preserve the
GIOVA ring addresses and reset only the metadata cache. After clearing
ACCESS_PLATFORM, userspace must configure the vring addresses for the
new address mode.
vhost_vq_invalidate_access() clears desc, avail, and used together.
Treat the VQ as invalidated only when all three are NULL, since a single
GIOVA address may legitimately be zero. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: Shut down BO cache timer before teardown
The BO cache timer callback schedules time_work, and time_work can rearm
the timer through vc4_bo_cache_free_old().
vc4_bo_cache_destroy() deletes the timer and then cancels the work, which
does not break that cycle: the work being cancelled can rearm the timer,
and the timer then queues work again after teardown.
Use timer_shutdown_sync() instead, so the timer cannot be rearmed and the
cycle ends with cancel_work_sync(). |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: disable BH before calling udp_tunnel_xmit_skb()
udp_tunnel_xmit_skb() / udp_tunnel6_xmit_skb() are expected to run with
BH disabled. After commit 6f1a9140ecda ("add xmit recursion limit to
tunnel xmit functions"), on the path:
udp(6)_tunnel_xmit_skb() -> ip(6)tunnel_xmit()
dev_xmit_recursion_inc()/dec() must stay balanced on the same CPU.
Without local_bh_disable(), the context may move between CPUs, which can
break the inc/dec pairing. This may lead to incorrect recursion level
detection and cause packets to be dropped in ip(6)_tunnel_xmit() or
__dev_queue_xmit().
Fix it by disabling BH around both IPv4 and IPv6 SCTP UDP xmit paths.
In my testing, after enabling the SCTP over UDP:
# ip net exec ha sysctl -w net.sctp.udp_port=9899
# ip net exec ha sysctl -w net.sctp.encap_port=9899
# ip net exec hb sysctl -w net.sctp.udp_port=9899
# ip net exec hb sysctl -w net.sctp.encap_port=9899
# ip net exec ha iperf3 -s
- without this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 37.2 MBytes 31.2 Mbits/sec sender
[ 5] 0.00-10.00 sec 37.1 MBytes 31.1 Mbits/sec receiver
- with this patch:
# ip net exec hb iperf3 -c 192.168.0.1 --sctp
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec sender
[ 5] 0.00-10.00 sec 3.14 GBytes 2.69 Gbits/sec receiver |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: fix BQL imbalance in TX path
Fix a possible BQL imbalance in airoha_dev_xmit(), where inflight
packets are accounted only for the AIROHA_NUM_TX_RING netdev TX
queues. The queue index is computed as:
qid = skb_get_queue_mapping(skb) % ARRAY_SIZE(qdma->q_tx)
txq = netdev_get_tx_queue(dev, qid);
However, airoha_qdma_tx_napi_poll() accounts completions across all
netdev TX queues (num_tx_queues), leading to inconsistent BQL
accounting.
Also reset all netdev TX queues in the ndo_stop callback. |
| In the Linux kernel, the following vulnerability has been resolved:
selinux: allow multiple opens of /sys/fs/selinux/policy
Currently there can only be a single open of /sys/fs/selinux/policy at
any time. This allows any process to block any other process from
reading the kernel policy. The original motivation seems to have been
a mix of preventing an inconsistent view of the policy size and
preventing userspace from allocating kernel memory without bound, but
this is arguably equally bad. Eliminate the policy_opened flag and
shrink the critical section that the policy mutex is held. While we
are making changes here, drop a couple of extraneous BUG_ONs. |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: pmc: Fix unsafe generic_handle_irq() call
Currently, when resuming from system suspend on Tegra platforms,
the following warning is observed:
WARNING: CPU: 0 PID: 14459 at kernel/irq/irqdesc.c:666
Call trace:
handle_irq_desc+0x20/0x58 (P)
tegra186_pmc_wake_syscore_resume+0xe4/0x15c
syscore_resume+0x3c/0xb8
suspend_devices_and_enter+0x510/0x540
pm_suspend+0x16c/0x1d8
The warning occurs because generic_handle_irq() is being called from
a non-interrupt context which is considered as unsafe.
Fix this warning by deferring generic_handle_irq() call to an IRQ work
which gets executed in hard IRQ context where generic_handle_irq()
can be called safely.
When PREEMPT_RT kernels are used, regular IRQ work (initialized with
init_irq_work) is deferred to run in per-CPU kthreads in preemptible
context rather than hard IRQ context. Hence, use the IRQ_WORK_INIT_HARD
variant so that with PREEMPT_RT kernels, the IRQ work is processed in
hardirq context instead of being deferred to a thread which is required
for calling generic_handle_irq().
On non-PREEMPT_RT kernels, both init_irq_work() and IRQ_WORK_INIT_HARD()
execute in IRQ context, so this change has no functional impact for
standard kernel configurations.
[treding@nvidia.com: miscellaneous cleanups] |
| In the Linux kernel, the following vulnerability has been resolved:
ext2: Fix lost inode updates for IS_SYNC inodes
ext2_setsize() and ext2_xattr_set2() had a construct like:
if (IS_SYNC(inode)) {
sync_inode_metadata(inode, 1);
} else {
mark_inode_dirty(inode);
}
which leads to lost inode updates for IS_SYNC inodes because
sync_inode_metadata() does anything only if the inode is already dirty
and hence inode updates may be simply lost. Fix the problem by
unconditionally marking the inode dirty and *then* call
sync_inode_metadata(). |
| In the Linux kernel, the following vulnerability has been resolved:
alpha: fix user-space corruption during memory compaction
Alpha systems can suffer sporadic user-space crashes and heap
corruption when memory compaction is enabled.
Symptoms include SIGSEGV, glibc allocator failures (e.g. "unaligned
tcache chunk"), and compiler internal errors. The failures disappear
when compaction is disabled or when using global TLB invalidation.
The root cause is insufficient TLB shootdown during page migration.
Alpha relies on ASN-based MM context rollover for instruction cache
coherency, but this alone is not sufficient to prevent stale data or
instruction translations from surviving migration.
Fix this by introducing a migration-specific helper that combines:
- MM context invalidation (ASN rollover),
- immediate per-CPU TLB invalidation (TBI),
- synchronous cross-CPU shootdown when required.
The helper is used only by migration/compaction paths to avoid changing
global TLB semantics.
Additionally, update flush_tlb_other(), pte_clear(), to use
READ_ONCE()/WRITE_ONCE() for correct SMP memory ordering.
This fixes observed crashes on both UP and SMP Alpha systems. |
| In the Linux kernel, the following vulnerability has been resolved:
team: avoid NETDEV_CHANGEMTU event when unregistering slave
syzbot is reporting
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 3
ref_tracker: netdev@ffff88807dcf8618 has 1/2 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_hold include/linux/netdevice.h:4429 [inline]
inetdev_init+0x201/0x4e0 net/ipv4/devinet.c:286
inetdev_event+0x251/0x1610 net/ipv4/devinet.c:1600
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_mtu net/core/dev.c:2318 [inline]
netif_set_mtu_ext+0x5aa/0x800 net/core/dev.c:9886
netif_set_mtu+0xd7/0x1b0 net/core/dev.c:9907
dev_set_mtu+0x126/0x260 net/core/dev_api.c:248
team_port_del+0xb07/0xcb0 drivers/net/team/team_core.c:1333
team_del_slave drivers/net/team/team_core.c:1936 [inline]
team_device_event+0x207/0x5b0 drivers/net/team/team_core.c:2929
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
call_netdevice_notifiers_extack net/core/dev.c:2281 [inline]
call_netdevice_notifiers net/core/dev.c:2295 [inline]
__dev_change_net_namespace+0xcb7/0x2050 net/core/dev.c:12592
do_setlink+0x2ce/0x4590 net/core/rtnetlink.c:3060
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x15a9/0x1be0 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7d5/0xbe0 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x232/0x4b0 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x80f/0x9b0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x813/0xb40 net/netlink/af_netlink.c:1894
problem. Ido Schimmel found steps to reproduce
ip link add name team1 type team
ip link add name dummy1 mtu 1499 master team1 type dummy
ip netns add ns1
ip link set dev dummy1 netns ns1
ip -n ns1 link del dev dummy1
and also found that the same issue was fixed in the bond driver in
commit f51048c3e07b ("bonding: avoid NETDEV_CHANGEMTU event when
unregistering slave").
Let's do similar thing for the team driver, with commit ad7c7b2172c3 ("net:
hold netdev instance lock during sysfs operations") and commit 303a8487a657
("net: s/__dev_set_mtu/__netif_set_mtu/") also applied. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Adjust PHY FSM transition to TX_EN-to-PLL_ON for TMDS on DCN35
[Why]
A backport of the change made for DCN401 that addresses an issue where
we turn off the PHY PLL when disabling TMDS output, which causes the
OTG to remain stuck.
The OTG being stuck can lead to a hang in the DCHVM's ability to ACK
invalidations when it thinks the HUBP is still on but it's not receiving
global sync.
The transition to PLL_ON needs to be atomic as there's no guarantee
that the thread isn't pre-empted or is able to complete before the
IOMMU watchdog times out.
[How]
Backport the implementation from dcn401 back to dcn35.
There's a functional difference in when the eDP output is disabled in
dcn401 code so we don't want to utilize it directly. |
